Ordering number : ENN6403A 2SC5607 NPN Epitaxial Planar Silicon Transistor 2SC5607 DC / DC Converter Applications Applications • Package Dimensions Relay drivers, lamp drivers, motor drivers, strobes. unit : mm 2033A Features • • 0.4 0.5 15.0 0.6 • 2.2 4.0 3.0 • [2SC5607] Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. High allowable power dissipation. 1.8 • 0.4 0.4 3 1.3 0.7 0.7 1 2 1.3 3.0 3.8nom 1 : Emitter 2 : Collector 3 : Base SANYO : SPA Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 15 Collector-to-Emitter Voltage VCEO 10 V Emitter-to-Base Voltage VEBO 7 V 5 A 9 A Base Current IC ICP IB 1 A Collector Dissipation PC 0.55 W Collector Current Collector Current (Pulse) Junction Temperature Tj Storage Temperature Tstg V 150 °C --55 to +150 °C Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62502 TS IM TA-3603 / 21000 TS (KOTO) TA-2526 No.6403-1/4 2SC5607 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO Emitter Cutoff Current IEBO hFE1 Ratings Conditions min typ Unit max VCB=10V, IE=0 VEB=4V, IC=0 0.1 µA 0.1 µA VCE=2V, IC=500mA 600 VCE=2V, IC=3A 200 Gain-Bandwidth Product hFE2 fT Output Capacitance Cob VCB=10V, f=1MHz 23 VCE(sat)1 IC=1.5A, IB=30mA IC=3A, IB=60mA 100 150 mV 180 270 mV 0.85 1.2 DC Current Gain Collector-to-Emitter Saturation Voltage VCE=2V, IC=500mA VCE(sat)2 Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-On Time IC=1.5A, IB=30mA IC=10µA, IE=0 Fall Time MHz pF 15 IC=1mA, RBE=∞ IE=10µA, IC=0 See specified Test Circuit. ton tstg tf Storage Time 380 V V 10 V 7 V 30 ns See specified Test Circuit. 210 ns See specified Test Circuit. 11 ns Switching Time Test Circuit PW=20µs D.C.≤1% IB1 IB2 OUTPUT INPUT RB VR RL + + 50Ω 220µF 470µF VBE= --5V VCC=5V 20IB1= --20IB2= IC=1.5A IC -- VCE A 15m 20mA A 20m 10mA A 4 5mA 4mA 3 3mA 2 2mA 1mA 8mA 6mA 3 4mA 2mA 2 1mA 1 1 IB=0 0 0 0.2 0.4 0.6 0.8 Collector-to-Emitter Voltage, VCE -- V 1 0 DC Current Gain, hFE 4.0 3.5 3.0 Ta=7 5°C 25°C --25°C 2.0 1.5 1.0 5 4 IT01589 VCE=2V 3 2 4.5 3 hFE -- IC 10000 7 5 5.0 2.5 2 Collector-to-Emitter Voltage, VCE -- V IT01588 VCE=2V 5.5 IB=0 0 1.0 IC -- VBE 6.0 Collector Current, IC -- A 4 10mA A m 15 25mA 25 IC -- VCE 5 Collecotr Current, IC -- A mA 60m Collecotr Current, IC -- A 40m A 5 Ta=75°C 1000 7 5 --25°C 25°C 3 2 100 7 5 3 2 0.5 0 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE -- V 1.0 IT01590 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 7 10 IT01591 No.6403-2/4 2SC5607 VCE(sat) -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 5 3 2 25 100 7 5 5 =7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV IC / IB=20 °C °C Ta 3 2 5°C --2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 25 100 7 5 5 3 2 Ta=--25°C 1.0 7 25°C 75°C 5 3 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5°C °C --25 3 2 10 7 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT01593 Cob -- VCB f=1MHz Collector Current, IC -- A 3 2 Collector Current, IC -- A 2 100 7 5 3 2 3 2 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 IT01596 PC -- Ta 0.8 2 10 3 ICP=9A 5 IT01595 10 0µ s IC=5A 10 DC 0m s op era tio 3 2 n 0.1 7 5 0.01 10 7 ASO 1.0 7 5 3 2 3 5 s 3 2 3 1m 10 7 5 5 7 0.01 2 2 VCE=2V 7 5 Collector-to-Base Voltage, VCB -- V f T -- IC 1000 7 10 1.0 5 7 10 IT01594 °C =7 Ta 100 Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 IC / IB=50 7 Gain-Bandwidth Product, f T -- MHz 3 Collector Current, IC -- A VBE(sat) -- IC 10 IC / IB=50 1.0 0.01 5 7 10 IT01592 Collector Current, IC -- A VCE(sat) -- IC 1000 7 5 Tc=25°C Single pulse 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector-to-Emitter Voltage, VCE -- V 2 10 IT01597 Collector Dissipation, PC -- W 0.7 0.6 0.55 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01598 No.6403-3/4 2SC5607 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2002. Specifications and information herein are subject to change without notice. PS No.6403-4/4