Ordering number:EN6006 PNP/NPN Silicon Epitaxial Planar Transistors CPH3101/3201 DC/DC Converter Applications Applications Package Dimensions · Relay drivers, lamp drivers, motor drivers, strobes. unit:mm 2150 Features [CPH3101/3201] 0.15 0.2 · Adoption of FBET and MBIT processes. · High current capacitance. · Low collector-to-emitter saturation voltage. · High-speed switching. · Ultrasmall-sized package permitting applied sets to be made small and slim. · High allowable power dissipation. 2.9 0.4 0.6 3 2 1 2.8 0.6 1.6 0 to 0.1 1.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector ( ) : CPH3101 Specifications SANYO : CPH3 Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (–)30 V Collector-to-Emitter Voltage VCEO (–)30 V Emitter-to-Base Voltage VEBO IC (–)6 V (–)2 A ICP (–)4 Collector Current Collector Current (Pulse) Base Current IB Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg (–)400 Mounted on a ceramic board (600mm2×0.8mm) A mA 0.9 W 150 ˚C –55 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(–)20V, IE=0 (–)0.1 µA Emitter Cutoff Current IEBO VEB=(–)3V, IC=0 (–)0.1 µA DC Current Gain hFE VCE=(–)2V, IC=(–)100mA Gain-Bandwidth Product fT Cob VCE=(–)10V, IC=(–)50mA VCB=(–)10V, f=1MHz Output Capacitance 200 400 150 MHz 19(32) pF Collector-to-Emitter Saturation Voltage VCE(sat) IC=(–)1.5A, IB=(–)75mA 180 400 mV (–350) (–600) mV Base-to-Emitter Saturation Voltage VBE(sat) IC=(–)1.5A, IC=(–)75mA (–)0.85 (–)1.2 V Continued on next page. Marking : CPH3101 : AA, CPH3201 : CA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 40599TS (KOTO) TA-1594 No.6006–1/4 CPH3101/3201 Continued from preceding page. Parameter Symbol Collector-to-Base Breakdown Voltage Ratings Conditions min V(BR)CBO IC=(–)10µA, IE=0 V(BR)CEO IC=(–)1mA, RBE=∞ V(BR)EBO IC=(–)10µA, IC=0 Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time ton tstg Storage Time Turn-OFF Time ty p (–)30 V (–)30 V (–)6 See specified test circuit. V 60(60) ns See specified test circuit. tf Unit max See specified test circuit. 500 ns (350) ns 25(25) ns Switching Time Test Circuit IB1 PW=20µs DC≤1% IB2 OUTPUT INPUT 1kΩ RL 50Ω + + VR 100µF 470µF VBE=–5V VCC=12V 20IB1=–20IB2=IC=500mA (For PNP, the polarity is reversed.) I C - VCE –6mA -1.0 -0.8 –4mA -0.6 –2mA -0.4 A m 40m A A 1.6 1.2 8.0mA 6.0mA 1.0 0.8 4.0mA 0.6 2.0mA 0.4 0.2 -0.2 IB=0 0 0 -200 -400 -600 -800 IB=0 0 0 -1000 200 I C - VBE 3.2 3101 CPH CPH3201 1.6 1.2 0.8 800 1000 5 CPH3201 CPH3101/3201 VCE =2V For PNP, minus sign is omitted. 3 CPH3101 2 100 7 5 3 2 0.4 0 0 7 DC Current Gain, hFE 2.4 2.0 600 hFE - I C 1000 CPH3101/3201 VCE =2V For PNP, minus sign is omitted. 2.8 400 Collector-to-Emitter Voltage, VCE – mV Collector-to-Emitter Voltage, VCE – mV Collector Current, IC – A 10mA 1.4 A 0m –5 –8mA CPH3201 A 20m 50m -1.2 1.8 –10mA 0mA -1.4 I C - VCE 2.0 A 0mA 0m –2 –3 –4 –100mA –150mA –200mA -1.6 A –25 Collector Current, IC – A -1.8 0m 30 CPH3101 Collector Current, IC – A -2.0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE – V 1.0 1.2 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC – A No.6006–2/4 CPH3101/3201 fT - IC 1000 5 3 Output Capacitance, Cob – pF Gain Bandwidth Product, f T – MHz 7 CPH3201 2 CPH3101 100 7 5 3 2 10 10 2 3 5 7 100 2 3 5 7 1000 2 3 Cob - VCB 2 CPH3101/3201 VCE =10V For PNP, minus sign is omitted. CPH3101/3201 f=1MHz For PNP, minus sign is omitted. 100 7 5 3 CPH 310 1 2 CPH 320 10 1.0 5 Collector Current, IC – mA Collector Current, IC – A Collector-to-Emitter Saturation Voltage, VCE (sat) – V H3 CP 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 PC - Collector Dissipation, PC – W 7 100 2 10 IC m 10 1.0 7 5 DC 0m s s op era tio n 3 2 0.1 7 CPH3101/3201 Ta=25°C 5 Single pulse 3 For PNP, minus sign is omitted. 2 2 Mounted on a ceramic board (600mm ×0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 Collector-to-Emitter Voltage, VCE – V Collector Current, IC – A 1.2 5 s 0µ 1 20 3 2 0.01 3 ASO s 1m H3 CP 2 10 50 1 10 0.1 7 5 7 µs 100 3 1.0 7 5 3 2 5 7 5 ICP CPH3101/3201 IC=IB=10 For PNP, minus sign is omitted. 3 2 3 Collector-to-Base Voltage, VCB – V VCE(sat) - I C 5 2 1 Ta CPH3101/3201 1.0 0.9 M 0.8 ou nte do na 0.6 ce ram ic bo 0.4 ard (6 00 mm 0.2 0 0 20 40 60 80 100 2 ×0 .8m m) 120 Ambient Temperature, Ta – °C 140 160 No.6006–3/4 CPH3101/3201 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice. PS No.6006–4/4