EC3101C / EC3201C Ordering number : ENN6963A PNP / NPN Epitaxial Planar Silicon Transistors EC3101C / EC3201C Low-Frequency General-Purpose Amplifier Applications Features • Ultraminiature package facilitates miniaturization in end products. Specifications ( ) : EC3101C Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--)55 Collector-to-Emitter Voltage VCEO (--)50 V Emitter-to-Base Voltage VEBO (--)6 V Collector Current Base Current IC ICP IB Collector Dissipation PC 150 mW Junction Temperature Tj 150 °C Storage Temperature Tstg --55 to +150 °C Collector Current (Pulse) (--)150 V mA (--)300 mA (--)30 mA Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max Unit VCB=(--)35V, IE=0 (--)0.1 µA VEB=(--)4V, IC=0 (--)0.1 µA Gain-Bandwidth Product hFE fT VCE=(--)6V, IC=(--)1mA 200 600 Cob VCE=(--)6V, IC=(--)10mA VCB=(--)6V, f=1MHz (180)200 Output Capacitance Collector-to-Emitter Saturation Voltage VCE(sat) IC=(--)50mA, IB=(--)5mA (--0.12)0.08 (--)0.4 Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)50mA, IB=(--)5mA (--)0.8 (--)1.0 MHz (2.9)1.7 pF V V Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)10µA, IE=0 (--)55 V Collector-to-Emitter Breakdown Voltage V(BR)CEO V V(BR)EBO IC=(--)1mA, RBE=∞ IE=(--)10µA, IC=0 (--)50 Emitter-to-Base Breakdown Voltage (--)6 V Marking EC3101C : G EC3201C : H Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 42004 TS IM TB-00000112 / 92001 TS IM TA-2712 No.6963-1/4 EC3101C / EC3201C Package Dimensions unit : mm 2184A Electrical Connection (Top view) Polarity mark Type No. Bottom View 0.8 0.5 0.05 0.2 0.3 0.2 0.05 1 2 4 3 Marking Collector Emitter Collector 1 2 *Electrodes : on the bottom 1.0 0.6 0.05 Base Top View Polarity mark 4 0.3 3 1 : Base 2 : Emitter 3 : Collector 4 : Collector 0.6 0.05 Collector Base Emitter SANYO : ECSP1008-4 IC -- VCE µA --40 50 --200µA --30 --150µA --100µA --20 --50µA --10 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V 150µA 20 100µA 10 50µA IB=0 0.2 0.4 --15µA --10µA IB=0 0 --10 --20 --30 Collector-to-Emitter Voltage, VCE -- V --50 IT03247 1.0 IT03246 IC -- VCE 12 EC3201C PC=150mW 45µA 40µA 35µA 30µA 25µA 20µA 15µA 8 4 10µA 5µA IB=0 0 --40 0.8 Collector-to-Emitter Voltage, VCE -- V --5µA 0 0.6 50µA --20µA --4 250µA 200µA IT03245 --25µA 350µA 300µA 30 0 Collector Current, IC -- mA Collector Current, IC -- mA --8 A 0 EC3101C PC=150mW µA --50 A --45µ A 0 --4 µ 5 --3 µA --30µA 40 --1.0 IC -- VCE --12 400µ 0µ A --5 A 450µ EC3201C 50 µA 50 --4 µA 00 --4 IC -- VCE 50 0µA --30 --250µA µA 00 Collector Current, IC -- mA EC3101C --3 Collector Current, IC -- mA --50 0 10 20 30 40 50 Collector-to-Emitter Voltage, VCE -- V IT03248 No.6963-2/4 EC3101C / EC3201C IC -- VBE --80 --60 --40 --20 120 100 80 60 25°C --25°C --100 EC3201C VCE=6V 140 Collector Current, IC -- mA --120 Ta=75°C 25°C --25°C Collector Current, IC -- mA --140 IC -- VBE 160 EC3101C VCE= --6V Ta=75 °C --160 40 20 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE -- V 0 0 --1.4 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE -- V hFE -- IC 1000 0.2 IT03249 hFE -- IC 1000 EC3201C EC3101C 7 Ta=75°C 5 DC Current Gain, hFE DC Current Gain, hFE 7 25°C --25°C 3 2 100 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector Current, IC -- mA Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V --0.1 75° Ta= C 5 C 25° -C 25° 3 3 --25°C 2 2 3 5 7 1.0 2 2 3 5 7 10 2 3 --0.01 5 7 100 2 IT03252 VCE(sat) -- IC 5 2 7 Ta=75°C 25°C Collector Current, IC -- mA EC3101C IC / IB=10 3 5 100 0.1 5 7 --100 2 IT03251 VCE(sat) -- IC 5 EC3201C IC / IB=10 3 2 0.1 7 °C Ta=75 C --25° 5 3 2 25°C 0.01 --0.001 2 3 5 7 --0.01 2 3 5 7 --0.1 2 IT03253 Collector Current, IC -- A 2 0.001 3 5 7 0.01 2 3 5 7 Collector Current, IC -- A Cob -- VCB 7 EC3201C f=1MHz Output Capacitance, Cob -- pF 5 3 2 2 0.1 IT03254 Cob -- VCB 5 EC3101C f=1MHz Output Capacitance, Cob -- pF 1.4 IT03250 3 2 1.0 7 1.0 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 --100 IT03255 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 7 100 IT03256 No.6963-3/4 EC3101C / EC3201C f T -- IC 5 3 2 --100 7 5 3 2 2 3 5 7 --0.01 2 3 5 --0.1 IT03257 s op ms Collector Current, IC -- A 10 0m 10 DC er ati 3 on 2 2 EC3101C / EC3201C Ta=25°C Single pulse Mounted on glass epoxy boad. For PNP, the polarity is reversed. 0.001 0.1 2 3 100 7 5 3 2 2 3 5 7 5 7 1.0 2 3 5 2 0.01 3 5 7 0.1 IT03258 PC -- Ta EC3101C / EC3201C 100µs IC=0.15A 0.1 7 5 3 2 10µs s 1m 2 3 0.20 ICP=0.3A 3 5 Collector Current, IC -- A ASO 5 EC3201C VCE=6V 7 10 0.001 7 Collector Current, IC -- A 0.01 7 5 Gain-Brandwidth Product, f T -- MHz EC3101C VCE= --6V 7 --10 --0.001 f T -- IC 1000 Collector Dissipation, PC -- W Gain-Brandwidth Product, f T -- MHz --1000 0.15 0.10 0.05 0 7 10 2 Collector-to-Emitter Voltage, VCE -- V 3 5 7 IT03259 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03260 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2004. Specifications and information herein are subject to change without notice. PS No.6963-4/4