Ordering number:ENN6347 N-Channel Silicon MOSFET FTS2005 Liquid Crystal Display Backlight Drive Applications Features Package Dimensions · Low ON resistance. · Ultrahigh-speed switching. · Mounting height 1.1mm. unit:mm 2166 [FTS2005] 0.65 0.425 5 4.5 6.4 0.5 8 0.95 3.0 4 0.125 1.0 0.25 (0.95) 1 0.1 Specifications 1 : Drain 2 : Source 3 : Source 4 : Gate 5 : Drain 6 : No Contact 7 : No Contact 8 : Drain SANYO : TSSOP8 Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) Unit 100 V ±20 V 2 A ID Drain Current (pulse) IDP PW≤10µs, duty cycle≤1% Allowable Power Dissipation Mounted on a ceramic board (1000mm2×0.8mm) Channel Temperature PD Tch Storage Temperature Tstg 8 A 1.3 150 W ˚C –55 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on)1 Static Drain-to-Source On-State Resistance RDS(on)2 RDS(on)3 Conditions ID=1mA, VGS=0 Ratings min typ max 100 V VDS=100V, VGS=0 10 µA ±10 µA 2.0 V 0.2 0.26 Ω 0.22 0.33 Ω 0.3 0.6 Ω VGS=±16V, VDS=0 VDS=10V, ID=1mA 1.0 VDS=10V, ID=2A ID=2A, VGS=10V 4 ID=2A, VGS=4V ID=1A, VGS=3V Marking : S2005 Unit 5.6 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 60100TS (KOTO) TA-2599 No.6347-1/4 FTS2005 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Input Capacitance Ciss VDS=20V, f=1MHz 520 pF Output Capacitance Coss 100 pF Reverse Transfer Capacitance Crss VDS=20V, f=1MHz VDS=20V, f=1MHz 15 pF Turn-ON Delay Time td(on) See specified Test Circuit 10 ns tr See specified Test Circuit 4 ns td(off) See specified Test Circuit 80 ns tf See specified Test Circuit 35 IS=2A, VGS=0 0.8 Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage VSD ns 1.2 V Switching Time Test Circuit VDD=50V VIN 10V 0V ID=2A RL=25Ω VIN D VOUT PW=10µs D.C.≤1% G P.G FTS2005 50Ω S ID -- VDS 2.0 ID -- VGS 4.0 V 0.8 0.6 25°C 2.0 1.5 1.0 0.4 0.5 0.2 0 5°C 1.0 2.5 75°C VGS=2.5V 3.0 Ta=-2 1.2 Drain Current, ID – A 6.0 3.5 3.0 V 1.4 3.5 V 10. Drain Current, ID – A 1.6 4.0 V 8.0 V VDS=10V 0V 1.8 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Drain-to-Source Voltage, VDS – V 0.9 0 1.0 1.0 1.5 2.0 2.5 3.0 3.5 Gate-to-Source Voltage, VGS – V RDS(on) -- VGS 400 0.5 IT00956 4.0 IT00957 RDS(on) -- Ta 600 Ta=25°C Static Drain-to-Source On-State Resistance, RDS (on) – mΩ Static Drain-to-Source On-State Resistance, RDS (on) – mΩ 350 300 2A 250 ID=1A 200 150 100 50 0 0 2 4 6 8 10 12 14 16 Gate-to-Source Voltage, VGS – V 18 20 IT00958 500 400 =3V VGS 1A, = ID =4V , VGS A 1 I D= 10V S= A, VG 2 = ID 300 200 100 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta – ˚C 120 140 160 IT00959 No.6347-2/4 FTS2005 3 2 25 =-Ta 7 °C C 25° °C 75 5 3 3 2 0.1 7 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT00960 Drain Current, ID – A SW Time -- ID 1000 7 5 VDD=50V VGS=10V 0 3 2 2 td(off) 3 tf 2 td(on) 10 7 5 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 f=1MHz 1000 7 5 tr 1.0 IT00961 Ciss, Coss, Crss -- VDS 10000 7 5 3 100 7 5 0.1 Diode Forward Voltage, VSD – V Ciss, Coss, Crss – pF Switching Time, SW Time – ns 1.0 7 5 3 2 2 0.1 0.01 Ciss 3 2 Coss 100 7 5 3 3 2 2 Crss 10 1.0 2 0.1 3 5 7 2 1.0 Drain Current, ID – A 0 3 10 m 10 s 0m s D C 0.1 7 5 n Operation in this area is limited by RDS(on). io at er op 3 2 3 2 s 1m ID=2A Ta=25°C Single pulse Mounted on a ceramic board (1000mm2×0.8mm) 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS – V 2 3 Allowable Power Dissipation, PD – W 100µs 1.0 7 5 15 25 20 30 IT00963 PD -- Ta 1.6 IDP=8A 3 2 10 Drain-to-Source Voltage, VDS – V ASO 10 7 5 5 IT00962 2 Drain Current, ID – A 3 2 --25°C 5 VGS = 0 Ta=7 5°C 7 Forward Current, IF – A Forward Transfer Admittance, | yfs | – S 10 1.0 IF -- VSD 10 7 5 VDS=10V 25°C yfs -- ID 2 1.4 1.3 M ou 1.2 nt 1.0 ed on ac er am ic 0.8 bo ar 0.6 d( 10 00 m 0.4 0.2 m2 ×0 .8m m ) 0 5 7 100 IT00964 0 20 40 60 80 100 120 Ambient Temperature, Ta – ˚C 140 160 IT01016 No.6347-3/4 FTS2005 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2000. Specifications and information herein are subject to change without notice. PS No.6347-4/4