Ordering number:EN5028 FX401 TR:PNP Epitaxial Planar Silicon Transistor SBD:Schottky Barrier Diode DC-DC Converter Features Package Dimensions · Complex type of a low saturation voltage, high speed switching and large current PNP transistor and a fast recovery and low forward voltage Shottky barrier diode facilitating high-density mounting, · The FX401 is composed on 2chips, one being equivalent to the 2SB1121 and the other the SB3003P, placed in one package. unit:mm 2123 [FX401] 1:Base 2:Emitter 3:No Contact 4:Anode 5:Common (Collector, Cathode) 6:Common (Collector, Cathode) Electrical Connection 1:Base 2:Emitter 3:No Contact 4:Anode 5, 6:Common (Collector, Cathode) SANYO:XP5 (Bottom view) (Top view) Switching Time Test CIrcuit Trr Test Circuit Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit [TR] Collector-to-Base Voltage VCBO VCEO –30 V Collector-to-Emitter Voltage –25 V Emitter-to-Base Voltage VEBO –6 V IC –2 A I CP –5 Collector Current Collector Current (Pulse) –400 A Base Current IB Collector Dissipation PC 1.5 W Junction Temperature Tj 150 ˚C VRRM VRSM 30 V 35 V IO 3 A Mounted on ceramic board (750mm2×0.8mm) mA [SBD] Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage Average Rectified Current Surge Forward Current IFSM Junction Temperature Tj Storage Temperature Tstg · Marking:401 50Hz sine wave, 1cycle 10 A –55 to +125 ˚C –55 to +125 ˚C Continued on next page. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/41095TS (KOTO) TA-0087 No.5028-1/4 FX401 Continued from preceding page. Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ max Unit [TR] Collector Cutoff Current ICBO VCB=–20V, IE=0 –0.1 µA Emitter Cutoff Current VEB=–4V, IC=0 –0.1 µA DC Current Gain IEBO hFE1 hFE2 fT VCE=–2V, IC=–1.5A Gain-Bandwidth Product Output Capacitance Co b VCE=–10V, f=1MHz VCE(sat) VBE(sat) IC=–1.5A, IB=–75mA –350 –600 IC=–1.5A, IB=–75mA –1.0 –1.3 C-E Saturation Voltage B-E Saturation Voltage VCE=–2V, IC=–100mA 140 400 65 VCE=–10V, IC=–200mA 320 MHz 32 pF V V C-B Breakdown Voltage V(BR)CBO IC=–10µA, IE=0 –30 V C-E Breakdown Voltage V(BR)CBO IC=–10µA, RBE=∞ –25 V E-B Breakdown Voltage Turn-ON Time V(BR)EBO ton IE=–10µA, IC=0 See sepcified Test Circuit Storage Time tstg tf Fall Time –6 V 60 ns See sepcified Test Circuit 350 ns See sepcified Test Circuit 25 ns [SBD] (Value per element) Reverse Voltage VR Forward Voltage VF IR Reverse Current IR=1mA IF=3A C VR=10V, f=1MHz Reverse Recovery Time trr IF=IR=300mA, See specified Test Circuit Rthj-a V VR=15V Interterminal Capacitance Thermal Resistance 30 Mounted on ceramic board (750mm2×0.8mm) 0.55 V 200 µA 160 pF 30 85 ns ˚C/W No.5028-2/4 FX401 No.5028-3/4 FX401 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.5028-4/4