SS9012 SS9012 1W Output Amplifier of Potable Radios in Class B Push-pull Operation. • • • • High total power dissipation. (PT=625mW) High Collector Current. (IC= -500mA) Complementary to SS9013 Excellent hFE linearity. TO-92 1 1. Emitter 2. Base 3. Collector PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage Parameter Ratings -40 Units V VCEO Collector-Emitter Voltage -20 V VEBO Emitter-Base Voltage -5 V IC Collector Current -500 mA PC Collector Power Dissipation 625 mW TJ Junction Temperature 150 °C TSTG Storage Temperature -55 ~ 150 °C Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO Parameter Collector-Base Breakdown Voltage Test Condition IC = -100µA, IE =0 Min. -40 BVCEO Collector-Emitter Breakdown Voltage IC = -1mA, IB =0 -20 BVEBO Emitter-Base Breakdown Voltage IE = -100µA, IC =0 -5 ICBO Collector Cut-off Current VCB = -25V, IE =0 IEBO Emitter Cut-off Current VEB = -3V, IC =0 hFE1 hFE2 DC Current Gain VCE = -1V, IC = -50mA VCE = -1V, IC = -500mA VCE (sat) Collector-Emitter Saturation Voltage VBE (sat) Base-Emitter Saturation Voltage VBE (on) Base-Emitter On Voltage VCE = -1V, IC = -10mA Typ. Max. Units V V V 64 40 -100 nA -100 nA 120 90 202 IC = -500mA, IB = -50mA -0.18 -0.6 V IC = -500mA, IB = -50mA -0.95 -1.2 V -0.67 -0.7 V -0.6 hFE Classification Classification D E F G H hFE1 64 ~ 91 78 ~ 112 96 ~ 135 112 ~ 166 144 ~ 202 ©2002 Fairchild Semiconductor Corporation Rev. A4, November 2002 SS9012 Typical Characteristics -50 1000 IB=-300µA VCE = -1V -40 hFE, DC CURRENT GAIN IC[mA], COLLECTOR CURRENT IB=-250µA IB=-200µA -30 IB=-150µA IB=-100µA -20 IB=-50µA -10 10 -10 -0 -0 -10 -20 -30 -40 100 -50 Figure 2. DC current Gain -1000 VBE(sat) -100 VCE(sat) IC=10IB -1000 IC[mA], COLLECTOR CURRENT Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage ©2002 Fairchild Semiconductor Corporation fT[MHz], CURRENT GAIN-BANDWIDTH PRODUCT VBE(sat), VCE(sat)[V], SATURATION VOLTAGE Figure 1. Static Characteristic -100 -1000 IC[mA], COLLECTOR CURRENT VCE[V], COLLECTOR-EMITTER VOLTAGE -10 -10 -100 1000 VCE=-6V 100 10 1 -1 -10 -100 -1000 -10000 IC[mA], COLLECTOR CURRENT Figure 4. Current Gain Bandwidth Product Rev. A4, November 2002 SS9012 Package Dimensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 +0.10 0.38 –0.05 (R2.29) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A4, November 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. I1