TS13005 High Voltage NPN Transistor ITO-220 BVCEO = 400V BVCBO = 700V Ic = 4A VCE (SAT), = 1V @ Ic / Ib = 4A / 1A Pin assignment: 1. Base 2. Collector 3. Emitter Features Ordering Information High voltage. Part No. High speed switching Packing TS13005CZ Structure Package TO-220 Tube TS13005CI Silicon triple diffused type. ITO-220 TS13005CP NPN silicon transistor T&R TO-252 Absolute Maximum Rating (Ta = 25 oC unless otherwise noted) Parameter Symbol Limit Unit Collector-Base Voltage VCBO 700V V Collector-Emitter Voltage VCEO 400V V Emitter-Base Voltage VEBO 9 V IC 4 A Collector Current DC Pulse Collector Power Dissipation TO-220 8 PD 2 W ITO-220 1.5 TO-252 1.3 Operating Junction Temperature +150 o C - 65 to +150 o C TJ Operating Junction and Storage Temperature Range Note: 1. Single pulse, Pw = 300uS, Duty <= 2% TSTG Electrical Characteristics (Ta = 25 oC unless otherwise noted) Parameter Conditions Symbol Min Typ Max Unit IC = 10mA, IB = 0 BVCBO 700 Collector-Emitter Breakdown Voltage IC = 10mA, IE = 0 BVCEO 400 V Emitter-Base Breakdown Voltage IE = 1mA, IC = 0 BVEBO 9 V Collector Cutoff Current VCB = 700V, IE = 0 Static Collector-Base Voltage V ICBO 10 mA Emitter Cutoff Current VEB = 9V, IC = 0 IEBO 1 mA Collector-Emitter Saturation Voltage IC / IB = 4A / 1A VCE(SAT)1 1 V IC / IB = 1A / 0.2A VCE(SAT)2 0.5 DC Current Gain VCE = 5V, IC = 2A hFE 8 Frequency VCE = 10V, IC = 0.5A fT 4 Output Capacitance VCB = 10V, f = 0.1MHz Turn On Time Storage Time Fall Time RL = 62.5ohm 40 MHz Cob 65 VCC = 125V, IC = 2A, tON 0.8 IB1 = 0.4A, IB2 = - 0.4A, tSTG 4 uS tf 0.9 uS Note : pulse test: pulse width <=300uS, duty cycle <=2% TS13005 1-1 2003/12 rev. B pF uS TO-220 Mechanical Drawing K B A L DIM A B C D E F G H I J MIN 10.000 3.240 2.440 0.381 2.345 4.690 12.700 8.382 14.224 MAX 10.500 4.440 2.940 6.350 1.106 2.715 5.430 14.732 9.017 16.510 MIN 0.394 0.128 0.096 0.015 0.092 0.092 0.500 0.330 0.560 MAX 0.413 0.175 0.116 0.250 0.040 0.058 0.107 0.581 0.355 0.650 K L M N O P 3.556 0.508 27.700 2.032 0.255 5.842 4.826 1.397 29.620 2.921 0.610 6.858 0.140 0.020 1.060 0.080 0.010 0.230 0.190 0.055 1.230 0.115 0.024 0.270 C P J I M D H F G O E N TO-220 DIMENSION MILLIMETERS INCHES TO-252 Mechanical Drawing E J A A TO-252 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 6.570 6.840 0.259 0.269 B C D E F G H I J 9.250 0.550 2.560 2.300 0.490 1.460 0.520 5.340 1.460 F DIM I B G D TS13005 C H 2-2 10.400 0.700 2.670 2.390 0.570 1.580 0.570 5.550 1.640 0.364 0.022 0.101 0.090 0.019 0.057 0.020 0.210 0.057 2003/12 rev. B 0.409 0.028 0.105 0.094 0.022 0.062 0.022 0.219 0.065 ITO-220 Mechanical Drawing DIM A B C D E F G H I J K L M N O TS13005 3-3 ITO-220 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 10.04 10.07 0.395 0.396 6.20 (typ.) 0.244 (typ.) 2.20 (typ.) 0.087 (typ.) ∮1.40 (typ.) ∮0.055 (typ.) 15.0 15.20 0.591 0.598 0.52 0.54 0.020 0.021 2.35 2.73 0.093 0.107 13.50 13.55 0.531 0.533 1.11 1.49 0.044 0.058 2.60 2.80 0.102 0.110 4.49 4.50 0.176 0.177 1.15 (typ.) 0.045 (typ.) 3.03 3.05 0.119 0.120 2.60 2.80 0.102 0.110 6.55 6.65 0.258 0.262 2003/12 rev. B