Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE RD30HVF1 OBSERVE HANDLING PRECAUTIONS RoHS Compliance, Silicon MOSFET Power Transistor,175MHz,30W DESCRIPTION OUTLINE RD30HVF1 is a MOS FET type transistor specifically designed for VHF RF power amplifiers applications. DRAWING 22.0+/-0.3 18.0+/-0.3 7.2+/-0.5 7.6+/-0.3 4-C1 2 14.0+/-0.4 High power gain: Pout>30W, Gp>14.7dB @Vdd=12.5V,f=175MHz High Efficiency: 60%typ. 6.6+/-0.3 1 FEATURES R1.6 3.0+/-0.4 0.10 For output stage of high power amplifiers in VHF band Mobile radio sets. 2.3+/-0.3 2.8+/-0.3 APPLICATION 5.1+/-0.5 3 PIN 1.Drain 2.Source 3.Gate UNIT:mm RoHS COMPLIANT RD30HVF1-101 is a RoHS compliant products. RoHS compliance is indicate by the letter “G” after the Lot Marking. ABSOLUTE MAXIMUM RATINGS (Tc=25°C UNLESS OTHERWISE NOTED) SYMBOL VDSS VGSS Pch Pin ID Tch Tstg Rth j-c PARAMETER Drain to source voltage Gate to source voltage Channel dissipation Input power Drain current Channel temperature Storage temperature Thermal resistance CONDITIONS Vgs=0V Vds=0V Tc=25°C Zg=Zl=50Ω junction to case RATINGS 30 +/-20 75 2.5 7 175 -40 to +175 2.0 UNIT V V W W A °C °C °C/W Note 1: Above parameters are guaranteed independently. ELECTRICAL CHARACTERISTICS SYMBOL IDSS IGSS VTH Pout ηD (Tc=25°C, UNLESS OTHERWISE NOTED) PARAMETER Zero gate voltage drain current Gate to source leak current Gate threshold voltage Output power Drain efficiency Load VSWR tolerance CONDITIONS VDS=17V, VGS=0V VGS=10V, VDS=0V VDS=12V, IDS=1mA f=175MHz ,VDD=12.5V Pin=1.0W, Idq=0.5A VDD=15.2V,Po=30W(PinControl) f=175MHz,Idq=0.5A,Zg=50Ω Load VSWR=20:1(All Phase) MIN 1.3 30 55 LIMITS TYP MAX. 130 1 1.8 2.3 35 60 No destroy UNIT uA uA V W % - Note : Above parameters , ratings , limits and conditions are subject to change. RD30HVF1 17 Aug 2010 1/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE RD30HVF1 OBSERVE HANDLING PRECAUTIONS RoHS Compliance, Silicon MOSFET Power Transistor,175MHz,30W TYPICAL CHARACTERISTICS CHANNEL DISSIPATION VS. AMBIENT TEMPERATURE Ta=+25°C Vds=10V 80 8 60 6 Ids(A) CHANNEL DISSIPATION Pch(W) ... 100 Vgs-Ids CHARACTERISTICS 10 40 4 2 20 0 0 0 40 80 120 160 AMBIENT TEMPERATURE Ta(°C) 200 0 Vds-Ids CHARACTERISTICS 1 2 3 Vgs(V) 4 5 Vds VS. Ciss CHARACTERISTICS 10 200 Vgs=5.5V Ta=+25°C f=1MHz 180 Ta=+25°C 8 Vgs=5V 6 Vgs=4.5V 160 Ciss(pF) Ids(A) 140 Vgs=4V 4 120 100 80 60 Vgs=3.5V 2 40 20 Vgs=3V 0 0 0 2 4 6 Vds(V) 8 0 10 Vds VS. Coss CHARACTERISTICS 5 10 Vds(V) 15 20 Vds VS. Crss CHARACTERISTICS 140 20 Ta=+25°C f=1MHz Ta=+25°C f=1MHz 120 16 Crss(pF) Coss(pF) 100 80 60 12 8 40 4 20 0 0 0 5 10 Vds(V) 15 0 20 RD30HVF1 5 10 Vds(V) 15 20 17 Aug 2010 2/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE RD30HVF1 OBSERVE HANDLING PRECAUTIONS RoHS Compliance, Silicon MOSFET Power Transistor,175MHz,30W TYPICAL CHARACTERISTICS Pin-Po CHARACTERISTICS Po 40 30 60 Gp 20 40 10 Ｉｄｄ 0 10 20 Pin(dBm) 30 20 20 10 0 0 30 20 Idd 0 0.5 1 1.5 Pin(W) 0 2.5 2 Vgs-Ids CHARACTERISTICS 2 80 8 16 Ta=25°C f=175MHz Pin=1.0W Idq=0.5A Zg=ZI=50 ohm Vds=10V Tc=-25~+75°C 14 +25°C -25°C 6 12 8 Idd(A) 40 Ids(A) 10 Po Po(W) 40 Ta=25°C f=175MHz Vdd=12.5V Idq=0.5A Vdd-Po CHARACTERISTICS 60 60 ηd ηd(%) ηｄ 0 80 80 Pout(W) , Idd(A) 40 100 100 Po ηd(%) Po(dBm) , Gp(dB) , Idd(A) 50 Ta=+25°C f=175MHz Vdd=12.5V Idq=0.5A 50 Pin-Po CHARACTERISTICS +75°C 4 6 Idd 20 2 4 2 0 0 0 4 6 8 10 Vdd(V) 12 2 14 3 4 5 Vgs(V) RD30HVF1 17 Aug 2010 3/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE RD30HVF1 OBSERVE HANDLING PRECAUTIONS RoHS Compliance, Silicon MOSFET Power Transistor,175MHz,30W TEST CIRCUIT(f=175MHz) Vdd Vgg C1 9.1kOHM L1 C3 100OHM 8.2kOHM 10pF 175MHz RD30HVF1 L1 RF-in L2 C2 RF-OUT 56pF 56pF 100pF 100pF 33pF100pF 8pF 12 43pF 5pF 50pF 10 27 32 34 51 32 44 54 90 10.8 90 100 100 Note:Board material-Teflon substrate C1:2200pF 10uF in parallel micro strip line width=4.2mm/50OHM,er:2.7,t=1.6mm C2:2200pF*2 in parallel C3:2200pF,330uF in parallel 8 4.8 Dimensions:mm L1:4Turns,I.D6mm,D1.6mm P=1 silver plateted copper wire L2:5Turns,I.D6mm,D1.6mm P=1 silver plateted copper wire RD30HVF1 17 Aug 2010 4/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RoHS Compliance, RD30HVF1 Silicon MOSFET Power Transistor,175MHz,30W INPUT/OUTPUT IMPEDANCE VS.FREQUENCY CHARACTERISTICS f=175MHz Zout Zo=10Ω f=146MHz Zout f=135MHz Zout f=175MHz Zin f=135MHz Zin f=146MHz Zin Zin , Zout f Zin Zout (MHz) (ohm) (ohm) Conditions 135 0.71-j7.67 1.72-j0.86 Po=40W, Vdd=12.5V,Pin=1.0W 146 0.94-j6.46 2.12-j0.78 Po=38W, Vdd=12.5V,Pin=1.0W 175 0.53-j5.34 1.87-j0.70 Po=35W, Vdd=12.5V,Pin=1.0W RD30HVF1 17 Aug 2010 5/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE RD30HVF1 OBSERVE HANDLING PRECAUTIONS RoHS Compliance, Silicon MOSFET Power Transistor,175MHz,30W RD30HVF1 S-PARAMETER DATA (@Vdd=12.5V, Id=500mA) Freq. [MHz] 100 150 175 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1100 S11 (mag) 0.867 0.879 0.885 0.888 0.905 0.915 0.926 0.933 0.936 0.945 0.950 0.951 0.954 0.957 0.962 0.963 0.963 0.963 0.962 0.964 0.966 S21 (ang) -172.4 -176.3 -177.5 -179.1 178.5 176.2 174.1 171.8 169.5 167.6 165.6 163.6 161.7 159.9 158.2 156.5 154.8 153.2 151.6 150.1 146.9 (mag) 8.747 5.523 4.571 3.852 2.877 2.202 1.754 1.422 1.167 0.985 0.842 0.725 0.635 0.559 0.495 0.449 0.407 0.366 0.337 0.315 0.275 S12 (ang) 72.7 61.2 56.4 52.4 44.1 37.1 31.4 25.8 20.9 17.2 13.3 9.8 7.2 3.7 1.3 -0.5 -3.8 -5.2 -6.6 -9.9 -12.1 RD30HVF1 (mag) 0.015 0.014 0.013 0.012 0.010 0.009 0.007 0.006 0.005 0.004 0.005 0.005 0.005 0.007 0.007 0.008 0.009 0.011 0.011 0.013 0.015 S22 (ang) -11.6 -18.8 -22.2 -24.2 -26.2 -27.0 -24.4 -18.5 -8.2 8.0 21.6 35.6 45.7 53.5 58.4 61.6 60.7 61.5 63.1 65.6 62.3 (mag) 0.687 0.723 0.740 0.760 0.806 0.825 0.853 0.879 0.887 0.902 0.914 0.918 0.928 0.933 0.936 0.943 0.947 0.947 0.953 0.955 0.958 (ang) -166.3 -168.8 -169.6 -170.5 -172.5 -174.8 -177.1 -179.4 178.4 176.1 174.1 172.2 170.2 168.4 166.6 164.8 163.3 161.7 159.9 158.7 155.5 17 Aug 2010 6/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RoHS Compliance, RD30HVF1 Silicon MOSFET Power Transistor,175MHz,30W ATTENTION: 1.High Temperature ; This product might have a heat generation while operation,Please take notice that have a possibility to receive a burn to touch the operating product directly or touch the product until cold after switch off. At the near the product,do not place the combustible material that have possibilities to arise the fire. 2.Generation of High Frequency Power ; This product generate a high frequency power. Please take notice that do not leakage the unnecessary electric wave and use this products without cause damage for human and property per normal operation. 3.Before use; Before use the product,Please design the equipment in consideration of the risk for human and electric wave obstacle for equipment. PRECAUTIONS FOR THE USE OF MITSUBISHI SILICON RF POWER DEVICES: 1. The specifications of mention are not guarantee values in this data sheet. Please confirm additional details regarding operation of these products from the formal specification sheet. For copies of the formal specification sheets, please contact one of our sales offices. 2. RD series products (RF power transistors) are designed for consumer mobile communication terminals and were not specifically designed for use in other applications. In particular, while these products are highly reliable for their designed purpose, they are not manufactured under a quality assurance testing protocol that is sufficient to guarantee the level of reliability typically deemed necessary for critical communications elements. Examples of critical communications elements would include transmitters for base station applications and fixed station applications that operate with long term continuous transmission and a higher on-off frequency during transmitting, especially for systems that may have a high impact to society. 3. RD series products use MOSFET semiconductor technology. They are sensitive to ESD voltage therefore appropriate ESD precautions are required. 4. In the case of use in below than recommended frequency, there is possibility to occur that the device is deteriorated or destroyed due to the RF-swing exceed the breakdown voltage. 5. In order to maximize reliability of the equipment, it is better to keep the devices temperature low. It is recommended to utilize a sufficient sized heat-sink in conjunction with other cooling methods as needed (fan, etc.) to keep the channel temperature for RD series products lower than 120deg/C(in case of Tchmax=150deg/C) ,140deg/C(in case of Tchmax=175deg/C) under standard conditions. 6. Do not use the device at the exceeded the maximum rating condition. In case of plastic molded devices, the exceeded maximum rating condition may cause blowout, smoldering or catch fire of the molding resin due to extreme short current flow between the drain and the source of the device. These results causes in fire or injury. 7. For specific precautions regarding assembly of these products into the equipment, please refer to the supplementary items in the specification sheet. 8. Warranty for the product is void if the products protective cap (lid) is removed or if the product is modified in any way from it’s original form. 9. For additional “Safety first” in your circuit design and notes regarding the materials, please refer the last page of this data sheet. 10. Please refer to the additional precautions in the formal specification sheet. RD30HVF1 17 Aug 2010 7/8 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RoHS Compliance, RD30HVF1 Silicon MOSFET Power Transistor,175MHz,30W Keep safety first in your circuit designs ! Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap. Notes regarding these - These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. - Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. - All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com). - When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. - Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. - The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials. - If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. - Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein. RD30HVF1 17 Aug 2010 8/8