KSC5305DF NPN Silicon Transistor Features Equivalent Circuit C • High Voltage High Speed Power Switch B Application • • • • TO-220F 1 1.Base 3.Emitter E Built-in Free-wheeling Diode makes efficient anti saturation operation Suitable for half bridge light ballast Applications No need to interest an hFE value because of low variable storage-time spread even though corner spirit product Low base drive requirement Absolute Maximum Ratings Symbol 2.Collector TA=25°C unless otherwise noted Parameter Value Units VCBO Collector Base Voltage 800 V VCEO Collector Emitter Voltage 400 V VEBO Emitter Base Voltage 12 V IC Collector Current (DC) 5 A ICP *Collector Current (Pulse) 10 A IB Base Current (DC) 2 A IBP *Base Current (Pulse) 4 A PC Power Dissipation (TC=25°C) 40 W TJ Junction Temperature 150 °C -65 to +150 °C Rating Units TSTG Storage Temperature range Thermal Characteristics Symbol Parameter RθJC Thermal Resistance, Junction to Case 3.125 °C/W RθJA Thermal Resistance, Junction to Ambient 69.5 °C/W © 2009 Fairchild Semiconductor Corporation KSC5305DF Rev. A3 www.fairchildsemi.com 1 KSC5305DF — NPN Silicon Transistor September 2009 Symbol TA=25°C unless otherwise noted Parameter Test Condition Min. Typ. Max. Units BVCBO Collector-Base Breakdown Voltage IC=1mA, IE=0 800 - - V BVCEO Collector-Emitter Breakdown Voltage IC=5mA, IB=0 400 - - V BVEBO Emitter Cut-off Current IE=1mA, IC=0 12 - - V ICBO Collector Cut-off Current VCB=500V, IE=0 - - 10 μA IEBO Emitter Cut-off Current VEB = 9V, IC = 0 - - 10 μA hFE1 hFE2 DC Current Gain VCE=1V, IC=0.8A VCE=1V,IC=2A 22 8 - - VCE(sat) Collector-Emitter Saturation Voltage IC=0.8A, IB=0.08A IC=2A, IB=0.4A - - 0.4 0.5 V V VBE(sat) Base-Emitter Saturation Voltage IC=0.8A, IB=0.08A IC=2A, IB=0.4A - - 1.0 1.0 V V Cob Output Capacitance VCB = 10V, f=1MHz - - 75 pF tON Turn On Time - - 150 ns tSTG Storage Time - - 2 μs - - 0.2 μs VCC=15V,VZ=300V IC = 2A,IB1 = 0.4A IB2 = -0.4A, LC=200μH - - 2.25 μs - - 150 ns tF tSTG Fall Time Storage Time VCC=300V, IC =2A IB1 = 0.4A, IB2=-1A RL = 150Ω tF Fall Time VF Diode Forward Voltage IF = 1A IF = 2A - - 1.5 1.6 V V trr * Reverse recovery time (di/dt = 10A/μs) IF = 0.4A IF = 1A IF = 2A - 800 1.4 1.9 - ns μs μs * Pulse Test : Pulse Width=5mS, Duty cycles ≤ 10% © 2009 Fairchild Semiconductor Corporation KSC5305DF Rev. A3 www.fairchildsemi.com 2 KSC5305DF — NPN Silicon Transistor Electrical Characteristics 100 IB = 500mA IB = 450mA IB = 400mA IB = 350mA IB = 300mA IB = 250mA IB = 200mA IB = 150mA 4 3 o IB = 100mA IB = 50mA 2 VCE = 1V o Ta = 125 C 25 C hFE, DC CURRENT GAIN IC[A], COLLECTOR CURRENT 5 1 o -25 C 10 IB = 0 0 0 1 2 3 4 5 6 7 8 9 1 0.01 10 0.1 100 VCE = 5V Ta = 125 C hFE, DC CURRENT GAIN o 25 C o -20 C 10 1 0.01 0.1 1 10 IC = 10 IB 1 VBE(sat) VCE(sat) 0.1 0.01 0.01 10 0.1 Figure 3. DC current Gain 10 IC = 5IB VBE(sat), SATURATION VOLTAGE VCE(sat)[V], SATURATION VOLTAGE IC = 5IB o 25 C 1 o Ta = 125 C o -20 C 0.1 1 1 0.1 0.01 10 IC[A], COLLECTOR CURRENT o -20 C o 25 C o Ta = 125 C 0.1 1 10 IC[A], COLLECTOR CURRENT Figure 5. Collector-Emitter Saturation Voltage Figure 6. Base-Emitter Saturation Voltage © 2009 Fairchild Semiconductor Corporation KSC5305DF Rev. A3 10 Figure 4. Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 10 0.01 0.01 1 IC[A], COLLECTOR CURRENT IC[A], COLLECTOR CURRENT 0.1 10 Figure 2. DC current Gain VBE(sat), VCE(sat)[V], SATURATION VOLTAGE Figure 1. Static Characteristic o 1 IC[A], COLLECTOR CURRENT VCE[V], COLLECTOR-EMITTER VOLTAGE www.fairchildsemi.com 3 KSC5305DF — NPN Silicon Transistor Typical Performance Characteristics 1000 10 f = 1MHz VCC = 300V IC = 5IB1 = -2.5IB2 Cob[pF], CAPACITANCE tSTG, tF [μs], TIME tSTG 1 tF 0.1 100 10 1 0.01 0.1 1 1 10 10 VCB[V], COLLECTOR-BASE VOLTAGE IC[A], COLLECTOR CURRENT Figure 7. Switching Time Figure 8. Collector Output Capacitance 10 Vf [V], FORWARD DIODE VOLTAGE trr[μs], REVERSE RECOVERY TIME 1.6 1.4 1.2 1.0 0.8 1.0 1.5 1 0.1 0.01 2.0 0.1 If[A], FORWARD CURRENT 1 10 IF[A], FORWARD DIODE CURRENT Figure 9. Reverse Recovery Time Figure 10. Forward Diode Voltage 100 60 50 PC[W], POWER DISSIPATION IC[A], COLLECTOR CURRENT 100 10 1μs 10μs DC 1 5ms 1ms 0.1 30 20 10 0 0.01 10 100 0 1000 25 50 75 100 125 150 175 o TC[ C], CASE TEMPERATURE VCE[V], COLLECTOR-EMITTER VOLTAGE Figure 11. Safe Operating Area Figure 12. Power Derating © 2009 Fairchild Semiconductor Corporation KSC5305DF Rev. A3 40 www.fairchildsemi.com 4 KSC5305DF — NPN Silicon Transistor Typical Performance Characteristics KSC5305DF — NPN Silicon Transistor Physical Dimension 3.30 ±0.10 TO-220F 10.16 ±0.20 2.54 ±0.20 ø3.18 ±0.10 (7.00) (1.00x45°) 15.87 ±0.20 15.80 ±0.20 6.68 ±0.20 (0.70) 0.80 ±0.10 ) 0° (3 9.75 ±0.30 MAX1.47 #1 +0.10 0.50 –0.05 2.54TYP [2.54 ±0.20] 2.76 ±0.20 2.54TYP [2.54 ±0.20] 9.40 ±0.20 4.70 ±0.20 0.35 ±0.10 Dimensions in Millimeters © 2009 Fairchild Semiconductor Corporation KSC5305DF Rev. A3 www.fairchildsemi.com 5 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower¥ Auto-SPM¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL™ Current Transfer Logic™ EcoSPARK® EfficentMax™ EZSWITCH™* ™* ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ ® FACT FAST® FastvCore¥ FETBench¥ FlashWriter®* FPS¥ F-PFS¥ FRFET® SM Global Power Resource Green FPS¥ Green FPS¥ e-Series¥ Gmax™ GTO¥ IntelliMAX¥ ISOPLANAR¥ MegaBuck™ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® ® OPTOPLANAR ® PDP SPM™ Power-SPM¥ PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ™ Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START¥ SPM® STEALTH™ SuperFET¥ SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS™ SyncFET™ Sync-Lock™ ® * The Power Franchise® TinyBoost¥ TinyBuck¥ TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TriFault Detect¥ TRUECURRENT¥* PSerDes¥ ® UHC Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I41 © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com