STMICROELECTRONICS TIP147

TIP142
TIP147
Complementary power Darlington transistors
Features
■
Monolithic Darlington configuration
■
Integrated antiparallel collector-emitter diode
Applications
■
2
Linear and switching industrial equipment
Description
TO-247
The devices are manufactured in planar
technology with “base island” layout and
monolithic Darlington configuration. The resulting
transistors show exceptional high gain
performance coupled with very low saturation
voltage.
Table 1.
Figure 1.
Internal schematic diagrams
R1 typ. = 5 kΩ
R1 typ. = 8 kΩ
R2 typ. = 60 Ω
R2 typ. = 100 Ω
Device summary
Part number
Marking
Polarity
TIP142
TIP142
NPN
TIP147
TIP147
PNP
May 2010
3
1
Doc ID 4132 Rev 7
Package
Packaging
TO-247
Tube
1/8
www.st.com
8
Absolute maximum ratings
1
Absolute maximum ratings
Table 2.
Absolute maximum ratings
Symbol
Value
Unit
Collector-base voltage (IE = 0)
100
V
VCEO
Collector-emitter voltage (IB = 0)
100
V
VEBO
Emitter-base voltage (IC = 0)
5
V
Collector current
10
A
Collector peak current
20
A
Base current
0.5
A
PTOT
Total dissipation at Tcase = 25 °C
125
W
TSTG
Storage temperature
-65 to 150
°C
150
°C
ICM
IB
TJ
Max. operating junction temperature
For PNP type voltage and current are negative.
Table 3.
Symbol
RthJC
2/8
Parameter
VCBO
IC
Note:
TIP142, TIP147
Thermal data
Parameter
Thermal resistance junction-case
Doc ID 4132 Rev 7
__max
Value
Unit
1
°C/W
TIP142, TIP147
2
Electrical characteristics
Electrical characteristics
Tcase = 25 °C; unless otherwise specified.
Table 4.
Symbol
Electrical characteristics
Parameter
Test conditions
Typ.
Max.
Unit
ICBO
Collector cut-off current
(IE = 0)
VCB = 100 V
1
mA
ICEO
Collector cut-off current
(IB = 0)
VCE = 50 V
2
mA
IEBO
Emitter cut-off current
(IC = 0)
VEB = 5 V
2
mA
Collector-emitter
VCEO(sus)(1) sustaining voltage
(IB = 0)
IC = 30 mA
100
V
VCE(sat)(1)
Collector-emitter
saturation voltage
IC = 5 A
IC = 10 A
IB = 10 mA
IB = 40 mA
2
3
V
V
VBE(on)(1)
Base-emitter on voltage
IC = 10 A
VCE = 4 V
3
V
DC current gain
IC = 5 A
IC = 10 A
VCE = 4 V
VCE = 4 V
hFE(1)
ton
toff
1.
Min.
Resistive load
Turn-on time
Turn-off time
RL = 3 Ω
IC = 10 A
IB1 = -IB2 = 40 mA
1000
500
0.9
4
µs
µs
Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %.
Note:
For PNP type voltage and current are negative.
Doc ID 4132 Rev 7
3/8
Electrical characteristics
2.1
TIP142, TIP147
Test circuits
Figure 2.
Resistive load switching test circuit (NPN type)
1. Fast electronic switch
2. Non-inductive resistor
Figure 3.
Resistive load switching test circuit (PNP type)
1. Fast electronic switch
2. Non-inductive resistor
4/8
Doc ID 4132 Rev 7
TIP142, TIP147
3
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Doc ID 4132 Rev 7
5/8
Package mechanical data
TIP142, TIP147
TO-247 mechanical data
mm.
Dim.
A
Min.
4.85
A1
2.20
2.60
b
1.0
1.40
b1
2.0
2.40
b2
3.0
3.40
c
0.40
0.80
D
19.85
20.15
E
15.45
15.75
e
Max .
5.15
5.45
L
14.20
14.80
L1
3.70
4.30
L2
18.50
øP
3.55
3.65
øR
4.50
5.50
S
6/8
Typ
5.50
Doc ID 4132 Rev 7
TIP142, TIP147
4
Revision history
Revision history
Table 5.
Document revision history
Date
Revision
Changes
15-Oct-2007
6
Package change from SOT-93 to TO-247.
12-May-2010
7
Technology change from epitaxial base to planar base island.
Doc ID 4132 Rev 7
7/8
TIP142, TIP147
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
8/8
Doc ID 4132 Rev 7