VECTRON TFS111B

file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
1/5
Measurement condition
Ambient temperature:
23°C
Input power level:
0dBm
Terminating impedances *)
for input:
3,2 kΩ ||- 5,6pF
for output:
3,1 kΩ || -6.2pF
Characteristics
Remark:
The reference level for the relative attenuation arel of TFS 111B is the minimum of the pass band attenuation amin. This value is defined as the
insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 20,0 dB filter attenuation level
relative to the insertion loss ae.
Data
typ. value
Insertion loss
(reference level)
ae = amin
Centre frequency
fc (30 dB-BW)
7
111
tolerance / limit
dB
11
MHz
± 60
dB
kHz
Relative attenuation
arel
fc - 500
kHz ... fc + 500
kHz
1
dB
max.
2
dB
fc ±
fc ±
fc ±
MHz
MHz
MHz
22
33
45
dB
dB
dB
min.
min.
min.
20
30
40
dB
dB
dB
300
ns
max 500
ns
1
2
3
MHz ... fc ± 2
MHz ... fc ± 3
MHz ... fc ± 10
**)
Group delay
Ripple fc ± 500 kHz
GD
Temperature coefficient
TC 2nd order **)
Frequency inversion temperature To
- 0,032 ppm/K²
25
Operating temperature range
Storage temperature range
Input power level
-
°C
- 10 °C ... + 60 °C
- 40 °C ... + 85 °C
-
max. + 10
dBm
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) - ∆f (Hz) = TC (ppm/K²) x (T - To)² x FTo (MHz)
Generated:
Checked / approved:
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
2/5
Construction and pin connection
(All dimensions in mm)
S 111 B
P09
3
2 Ma x.
1
5,2 Ma x.
2,54 +-0,2
7,2 Ma x.
2,54+-0,2
1
2
3
4
5
6
7
8
9
10
11
12
Ground
Ground
Output RF Return
Output
Ground
Ground
Ground
Ground
Input RF Return
Input
Ground
Ground
Datecode:
M
N
P
...
Year+week
2000
2001
2002
0,8
50 Ω test circuit
L2
L1
10
Input
4
Input
SAW
50 Ohm
C1
50 Ohm
C2
1,2,3,5,6,7,
8,9,11,12
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
3/5
Stability Characteristics:
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
temperature:
-55 °C to 125°C / 30 min each. / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing:
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
Tape (all dimensions in mm)
W
: 16
± 0,3
Po
:
4
± 0,1
Do
:
1,5 + 0,1
E
:
1,75 ± 0,1
F
:
7,5 ± 0,1
G (min) :
0,6
P2
:
2 ± 0,1
P1
:
8 ± 0,1
D1(min) :
Ao
:
Bo
:
Ct
:
1,5
5,5 ± 0,1
7,5 ± 0,1
13,5+/-0,1
3000
min 300 mm
min 500 mm
min 300 mm
EMBOSSED CARRIER TAPE
Do
Po
P2
E
Ao
F
D1
W
Bo
Ct
G
P1
COVER TAPE
W2
Reel (all dimensions in mm):
A
:
330
W1
:
W 2 (max) :
16,4 +2
22,4
N (min)
:
50
C
:
13
+ 0,5
- 0,2
A
C
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
VI TELEFILTER
version 2.0
Filter specification
TFS 111B
5/5
History
Version
Reason of Changes
Development specification
1.1.
- passband ripple: 3dB Î 1.5 dB
- new datecode introduced and explained
1.2.
- complete specification
- passband ripple, group delay ripple, attenuation at fc+-1MHz
changed according to agreements with customer
Filter specification
2.0
- typical values and terminating impedance added
Name
Date
Steiner
08.05.2000
Steiner
28.07.2000
Steiner
26.02.2002
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.