FDP5680/FDB5680 60V N-Channel PowerTrenchTM MOSFET General Description Features 40 A, 60 V. RDS(ON) = 0.020 Ω @ VGS = 10 V RDS(ON) = 0.023 Ω @ VGS = 6 V. This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. Critical DC electrical parameters specified at evevated temperature. These MOSFETs feature faster switching and lower gate charge than other MOSFETs with comparable R DS(on) specifications resulting in DC/DC power supply designs with higher overall efficiency. Rugged internal source-drain diode can eliminate the need for an external Zener diode transient suppressor. High performance trend technology for extremely low RDS(ON). 175°C maximum junction temperature rating. D D G G D G TO-220 S FDP Series S TO-263AB S FDB Series Absolute Maximum Ratings Symbol TC = 25°C unless otherwise noted FDP5680 Parameter FDB5680 Units VDSS Drain-Source Voltage 60 V VGSS Gate-Source Voltage V ID Maximum Drain Current - Continuous ±20 40 - Pulsed 120 PD Total Power Dissipation @ TC = 25°C TJ, TSTG Derate above 25°C Operating and Storage Junction Temperature Range A 65 W 0.43 -65 to +175 W/°C °C Thermal Characteristics RθJC Thermal Resistance, Junction-to-Case 2.3 °C/W RθJA Thermal Resistance, Junction-to-Ambient 62.5 °C/W Package Marking and Ordering Information Device Marking Device Reel Size Tape Width Quantity FDB5680 FDB5680 13’’ 24mm 800 FDP5680 FDP5680 Tube N/A 45 2000 Fairchild Semiconductor International FDP5680/FDB5680 Rev. C FDP5680/FDB5680 July 2000 Symbol Parameter Test Conditions Drain-Source Avalanche Ratings WDSS IAR Tc = 25°C unless otherwise noted Min Typ Max Units 90 mJ 40 A (Note1) Single Pulse Drain-Source VDD = 30 V, ID = 40A Avalanche Energy Maximum Drain-Source Avalanche Current Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = -250 µA ∆BVDSS ∆T J IDSS Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current ID = -250 µA, Referenced to 25°C VDS = 48 V, VGS = 0 V 1 IGSSF Gate-Body Leakage Current, Forward Gate-Body Leakage Current, Reverse VGS = 20 V, VDS = 0 V 100 µA nA VGS = -20 V, VDS = 0 V -100 nA 4 V IGSSR On Characteristics 60 V mV/°C 60 (Note 1) VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA ∆VGS(th) ∆T J RDS(on) Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance ID = -250 µA, Referenced to 25°C -6.4 0.016 0.022 0.018 ID(on) On-State Drain Current VGS = 10 V, ID = 20 A, VGS = 10 V, ID = 20 A,TJ = 125°C VGS = 6 V, ID = 19 A VGS = 10 V, VDS = 5 V gFS Forward Transconductance VDS = 5 V, ID = 20 A 2 2.5 mV/°C 0.020 0.035 0.023 20 Ω A 43 S Dynamic Characteristics VDS = 25 V, VGS = 0 V, f = 1.0 MHz Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics 1850 pF 230 pF 95 pF (Note 1) VDD = 30 V, ID = 1 A, VGS = 10 V, RGEN = 6 Ω td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time 35 56 ns tf Turn-Off Fall Time 16 26 ns Qg Total Gate Charge 33 46 nC Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS = 30 V, ID = 20 A VGS = 10 V 15 27 ns 9 18 ns 6.5 nC 7.5 nC Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 20 A (Note 1) (Note 1) 0.9 40 A 1.2 V Note: 1. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% FDP5680/FDB5680 Rev. C FDP5680/FDB5680 Electrical Characteristics FDP5680/FDB5680 Typical Characteristics 2.2 VGS = 10V 70 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID, DRAIN-SOURCE CURRENT (A) 80 6.0V 5.0V 60 50 4.5V 40 30 20 4.0V 10 2 VGS = 4.0V 1.8 1.6 4.5V 1.4 5.0V 6.0V 1.2 7.0V 1 0.8 0 0 1 2 3 0 4 10 20 Figure 1. On-Region Characteristics. 40 50 60 70 80 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.05 2 ID = 20A VGS = 10V 1.8 RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 30 ID, DRAIN CURRENT (A) VDS, DRAIN-SOURCE VOLTAGE (V) 1.6 1.4 1.2 1 0.8 0.6 0.4 -50 -25 0 25 50 75 100 125 ID = 20A 0.04 TA = 125oC 0.03 0.02 TA = 25oC 0.01 0 150 3 4 5 o TJ, JUNCTION TEMPERATURE ( C) 6 7 8 9 10 1.2 1.4 VGS, GATE TO SOURCE VOLTAGE (V) Figure 3. On-Resistance Variation with Temperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 60 100 IS, REVERSE DRAIN CURRENT (A) o TA = -55 C VDS = 5V 25oC 50 ID, DRAIN CURRENT (A) 10V o 125 C 40 30 20 10 VGS = 0V 10 o TA = 125 C 1 o 25 C 0.1 o -55 C 0.01 0.001 0.0001 0 2 3 4 5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 6 0 0.2 0.4 0.6 0.8 1 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDP5680/FDB5680 Rev. C (continued) 2500 ID = 20A VDS = 10V f = 1MHz VGS = 0 V 20V 30V 8 2000 CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 10 6 4 CISS 1500 1000 2 500 0 0 COSS CRSS 0 5 10 15 20 25 30 35 0 10 Qg, GATE CHARGE (nC) 20 30 40 50 60 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 7. Gate-Charge Characteristics. Figure 8. Capacitance Characteristics. 1500 1000 o TC = 25 C 10ms POWER (W) RDS(ON) LIMIT 100ms 1s 10s DC 10 VGS = 10V SINGLE PULSE RθJC = 2.3oC/W 1 SINGLE PULSE o RθJC = 2.3 C/W 1200 1ms 100 900 600 300 o TC = 25 C 0.1 0.1 1 10 100 0 0.0001 VDS, DRAIN-SOURCE VOLTAGE (V) 0.001 0.01 0.1 1 10 SINGLE PULSE TIME (SEC) Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. 0.5 (t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 r ID DRAIN CURRENT (A) FDP5680/FDB5680 Typical Characteristics D = 0.5 0.3 0.2 0.2 0.1 0.1 0.05 0.02 0.05 0.03 0.1 Single Pulse 0.5 1 R θJC (t) = r(t) * RθJC R θJC =2.3 °C/W P(pk) t1 t2 TJ - TC = P * RJC (t) θ Duty Cycle, D = t1 /t2 10 100 1000 3000 10000 t 1 ,TIME (ms) Figure 11. Transient Thermal Response Curve. FDP5680/FDB5680 Rev. C TO-220 Tape and Reel Data and Package Dimensions TO-220 Tube Packing Configuration: Figur e 1.0 Packaging Description: TO-220 parts are ship ped normally in tube. The tube is made of PVC plastic treated with anti -stati c agent.These tubes in standard option are placed inside a dissipative plastic bag, barcode labeled, and placed inside a box made of recyclable corrugated pa per. One box contains two ba gs maximum (see fig. 1.0). And one or several o f these boxes are placed inside a labeled shipp ing bo x whic h c omes in different sizes dependi ng on the nu mber of parts ship ped. The other option comes in bulk as described in the Packagin g Information table. The unit s in this option are placed inside a small box laid w ith antistatic bubble sheet. These smaller boxes are individually labeled and placed ins ide a larger box (see fig. 3.0). These larger or intermediate boxes then will b e placed finally inside a labeled shipping box whic h still comes in different sizes depending on the number of units shipped. 45 unit s per Tube 12 Tubes per Bag 530mm x 130mm x 83mm Intermediate box 2 bag s per Box Conduct ive Plasti c B ag TO-220 Packaging Information: Figure 2.0 FSCINT Labe l samp le FAIRCHILD SEMICONDUCTOR CORPORATION TO-220 Packaging Information Packaging Option Packaging type Qty per Tube/Box NSID: Standard CBVK741B019 QTY: FDP7060 HTB:B 1080 SPEC: S62Z (no f l ow code ) Rail/Tube BULK 45 300 D/C1: D9842 SPEC REV: B2 QA REV: 530x130x83 114x102x51 Max qty per Box 1,080 1,500 Weight per unit (gm) 1.4378 1.4378 Box Dimension (mm) LOT: 1080 uni ts maxi mum quant it y per bo x FSCINT Label (FSCINT) Note/Comments TO-220 bulk Packing Configuration: Figure 3.0 An ti-stati c Bubbl e Sheet s FSCINT Label 530mm x 130mm x 83mm Intermediate box 1500 uni ts maxi mum quant it y per intermediate box 300 units per EO70 box 5 EO70 boxe s per per Interm ediate Bo x 114mm x 102mm x 51mm EO70 Immed iate Box FSCINT Label TO-220 Tube Configuration: Figure 4.0 0.123 +0.001 -0.003 0.165 0.080 Note: All dim ensions are in inches F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L 0.275 0.450 ±.030 F 9852 NDP4060L 1.300 ±.015 0.032 ±.003 20.000 +0.031 -0.065 0.160 0.800 0.275 August 1999, Rev. B TO-220 Tape and Reel Data and Package Dimensions, continued TO-220 (FS PKG Code 37) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 1.4378 September 1998, Rev. A TO-263AB/D2PAK Tape and Reel Data and Package Dimensions TO-263AB/D2PAK Packaging Configuration: Figure 1.0 Packaging Description: TO-263/D2PAK parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 800 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). This and some other options are further described in the Packaging Information table. EL ECT ROST AT IC SEN SIT IVE DEVICES DO NO T SHI P OR STO RE N EAR ST RO NG EL ECT ROST AT IC EL ECT RO M AGN ETI C, M AG NET IC O R R ADIO ACT IVE FI ELD S TNR D ATE PT NUMB ER PEEL STREN GTH MIN ___ __ ____ __ ___gms MAX ___ ___ ___ ___ _ gms Antistatic Cover Tape ESD Label These full reels are individually barcode labeled, dry packed, and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains one reel maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. CAUTION Static Dissipative Embossed Carrier Tape Moisture Sensitive Label F63TNR Label F9835 FDB603AL F9835 FDB603AL F9835 FDB603AL Customized Label F9835 FDB603AL TO-263AB/D2PAK Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR Rail/Tube 800 45 L86Z 13" Dia - 359x359x57 530x130x83 800 1,080 Weight per unit (gm) 1.4378 1.4378 Weight per Reel 1.6050 - Max qty per Box TO-263AB/D2PAK Unit Orientation 359mm x 359mm x 57mm Standard Intermediate box ESD Label Note/Comments Moisture Sensitive Label F63TNR Label sample F63TNR Label LOT: CBVK741B019 QTY: 800 FSID: FDB6320L SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F DRYPACK Bag (F63TNR)3 TO-263AB/D2PAK Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 400mm minimum or 25 empty pockets Leader Tape 1520mm minimum or 95 empty pockets September 1999, Rev. B TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued TO-263AB/D2PAK Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 TO263AB/ D2PAK (24mm) 10.60 +/-0.10 15.80 +/-0.10 W 24.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 F 22.25 min 11.50 +/-0.10 P1 P0 16.0 +/-0.1 4.0 +/-0.1 K0 T 4.90 +/-0.10 0.450 +/-0.150 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 0.06 +/-0.02 0.9mm maximum 10 deg maximum Typical component cavity center line B0 21.0 +/-0.3 Tc 0.9mm maximum 10 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation 2PAK TO-263AB/D Figure 4.0 Sketch C (Top View) Component lateral movement Sketch B (Top View) Reel Configuration: Component Rotation W1 Measured at Hub Dim A Max B Min Dim C Dim A max Dim D min Dim N DETAIL AA See detail AA W3 13" Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Size 24mm Reel Option 13" Dia Dim A Dim B 13.00 330 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 4.00 100 Dim W1 0.961 +0.078/-0.000 24.4 +2/0 Dim W2 1.197 30.4 Dim W3 (LSL-USL) 0.941 – 0.1.079 23.9 – 27.4 August 1999, Rev. B TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued TO-263AB/D2PAK (FS PKG Code 45) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 1.4378 August 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ISOPLANAR™ MICROWIRE™ POP™ PowerTrench QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. D TO-220 Tape and Reel Data and Package Dimensions TO-220 Tube Packing Configuration: Figur e 1.0 Packaging Description: TO-220 parts are ship ped normally in tube. The tube is made of PVC plastic treated with anti -stati c agent.These tubes in standard option are placed inside a dissipative plastic bag, barcode labeled, and placed inside a box made of recyclable corrugated pa per. One box contains two ba gs maximum (see fig. 1.0). And one or several o f these boxes are placed inside a labeled shipp ing bo x whic h c omes in different sizes dependi ng on the nu mber of parts ship ped. The other option comes in bulk as described in the Packagin g Information table. The unit s in this option are placed inside a small box laid w ith antistatic bubble sheet. These smaller boxes are individually labeled and placed ins ide a larger box (see fig. 3.0). These larger or intermediate boxes then will b e placed finally inside a labeled shipping box whic h still comes in different sizes depending on the number of units shipped. 45 unit s per Tube 12 Tubes per Bag 530mm x 130mm x 83mm Intermediate box 2 bag s per Box Conduct ive Plasti c B ag TO-220 Packaging Information: Figure 2.0 FSCINT Labe l samp le FAIRCHILD SEMICONDUCTOR CORPORATION TO-220 Packaging Information Packaging Option Packaging type Qty per Tube/Box NSID: Standard CBVK741B019 QTY: FDP7060 HTB:B 1080 SPEC: S62Z (no f l ow code ) Rail/Tube BULK 45 300 D/C1: D9842 SPEC REV: B2 QA REV: 530x130x83 114x102x51 Max qty per Box 1,080 1,500 Weight per unit (gm) 1.4378 1.4378 Box Dimension (mm) LOT: 1080 uni ts maxi mum quant it y per bo x FSCINT Label (FSCINT) Note/Comments TO-220 bulk Packing Configuration: Figure 3.0 An ti-stati c Bubbl e Sheet s FSCINT Label 530mm x 130mm x 83mm Intermediate box 1500 uni ts maxi mum quant it y per intermediate box 300 units per EO70 box 5 EO70 boxe s per per Interm ediate Bo x 114mm x 102mm x 51mm EO70 Immed iate Box FSCINT Label TO-220 Tube Configuration: Figure 4.0 0.123 +0.001 -0.003 0.165 0.080 Note: All dim ensions are in inches F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L F 9852 NDP4060L 0.275 0.450 ±.030 F 9852 NDP4060L 1.300 ±.015 0.032 ±.003 20.000 +0.031 -0.065 0.160 0.800 0.275 August 1999, Rev. B TO-220 Tape and Reel Data and Package Dimensions, continued TO-220 (FS PKG Code 37) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 1.4378 September 1998, Rev. A TO-263AB/D2PAK Tape and Reel Data and Package Dimensions TO-263AB/D2PAK Packaging Configuration: Figure 1.0 Packaging Description: TO-263/D2PAK parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 800 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). This and some other options are further described in the Packaging Information table. EL ECT ROST AT IC SEN SIT IVE DEVICES DO NO T SHI P OR STO RE N EAR ST RO NG EL ECT ROST AT IC EL ECT RO M AGN ETI C, M AG NET IC O R R ADIO ACT IVE FI ELD S TNR D ATE PT NUMB ER PEEL STREN GTH MIN ___ __ ____ __ ___gms MAX ___ ___ ___ ___ _ gms Antistatic Cover Tape ESD Label These full reels are individually barcode labeled, dry packed, and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains one reel maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. CAUTION Static Dissipative Embossed Carrier Tape Moisture Sensitive Label F63TNR Label F9835 FDB603AL F9835 FDB603AL F9835 FDB603AL Customized Label F9835 FDB603AL TO-263AB/D2PAK Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR Rail/Tube 800 45 L86Z 13" Dia - 359x359x57 530x130x83 800 1,080 Weight per unit (gm) 1.4378 1.4378 Weight per Reel 1.6050 - Max qty per Box TO-263AB/D2PAK Unit Orientation 359mm x 359mm x 57mm Standard Intermediate box ESD Label Note/Comments Moisture Sensitive Label F63TNR Label sample F63TNR Label LOT: CBVK741B019 QTY: 800 FSID: FDB6320L SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F DRYPACK Bag (F63TNR)3 TO-263AB/D2PAK Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 400mm minimum or 25 empty pockets Leader Tape 1520mm minimum or 95 empty pockets September 1999, Rev. B TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued TO-263AB/D2PAK Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 TO263AB/ D2PAK (24mm) 10.60 +/-0.10 15.80 +/-0.10 W 24.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 F 22.25 min 11.50 +/-0.10 P1 P0 16.0 +/-0.1 4.0 +/-0.1 K0 T 4.90 +/-0.10 0.450 +/-0.150 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 0.06 +/-0.02 0.9mm maximum 10 deg maximum Typical component cavity center line B0 21.0 +/-0.3 Tc 0.9mm maximum 10 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation 2PAK TO-263AB/D Figure 4.0 Sketch C (Top View) Component lateral movement Sketch B (Top View) Reel Configuration: Component Rotation W1 Measured at Hub Dim A Max B Min Dim C Dim A max Dim D min Dim N DETAIL AA See detail AA W3 13" Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Size 24mm Reel Option 13" Dia Dim A Dim B 13.00 330 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 4.00 100 Dim W1 0.961 +0.078/-0.000 24.4 +2/0 Dim W2 1.197 30.4 Dim W3 (LSL-USL) 0.941 – 0.1.079 23.9 – 27.4 August 1999, Rev. B TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued TO-263AB/D2PAK (FS PKG Code 45) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 1.4378 August 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST FASTr™ GTO™ SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. E