STMICROELECTRONICS PD84006L-E

PD84006L-E
RF power transistor, LDmoST plastic family
Features
■
Excellent thermal stability
■
Common source configuration
■
Broadband performances:
POUT = 6 W with 13 dB gain @ 870 MHz
■
Plastic package
■
ESD protection
■
Supplied in tape and reel
■
In compliance with the 2002/95/EC european
directive
PowerFLATTM (5mm x 5mm)
Description
The PD84006L-E is a common source N-channel,
enhancement-mode lateral Field-Effect RF power
transistor. It is designed for high gain, broad band
commercial and industrial applications. It
operates at 7 V in common source mode at
frequencies up to 1 GHz.
Figure 1.
Pin connection
PD84006L-E’s superior gain and efficiency makes
it an ideal solution for portable radio and UHF
RFID reader.
Table 1.
Device summary
Order code
Marking
Package
Packaging
PD84006L-E
84006
PowerFLATTM (5mm x 5mm)
Tape and reel
July 2008
Rev 3
1/16
www.st.com
16
Contents
PD84006L-E
Contents
1
2
Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2
Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3
ESD protection characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.4
Moisture sensitivity level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Typical performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6
Circuit layout and photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
PD84006L-E
Electrical data
1
Electrical data
1.1
Maximum ratings
Table 2.
Absolute maximum ratings (TCASE = 25°C)
Symbol
Value
Unit
V(BR)DSS
Drain-source voltage
25
V
VGS
Gate-source voltage
-0.5 to +15
V
Drain current
5
A
Power dissipation
31
W
Max. operating junction temperature
150
°C
-65 to +150
°C
Value
Unit
4
°C/W
ID
PDISS
TJ
TSTG
1.2
Parameter
Storage temperature
Thermal data
Table 3.
Symbol
RthJC
Thermal data
Parameter
Junction - case thermal resistance
3/16
Electrical characteristics
2
PD84006L-E
Electrical characteristics
TCASE = +25 oC
2.1
Static
Table 4.
Static
Symbol
2.2
Max
Unit
VDS = 25 V
1
µA
IGSS
VGS = 5 V
VDS = 0 V
1
µA
VGS(Q)
VDS = 10 V
VDS(ON)
VGS = 10 V
ID = 1 A
0.34
V
CISS
VGS = 0 V
VDS = 7 V
f = 1 MHz
40
pF
COSS
VGS = 0 V
VDS = 7 V
f = 1 MHz
33
pF
CRSS
VGS = 0 V
VDS = 7 V
f = 1 MHz
1.45
pF
ID = 150 mA
3.4
V
Dynamic
P3dB
GPS
nD
Load
mismatch
Dynamic
Test conditions
Min
Typ
VDD = 7.5 V, IDQ = 150 mA, f = 870 MHz
5
6
VDD = 7.5 V, IDQ = 150 mA, POUT = 2W, f = 870 MHz
15
VDD = 7.5 V, IDQ = 150 mA, POUT = P3dB, f = 870 MHz
50
VDD = 9.5 V, IDQ = 150 mA, POUT = 8W, f = 870 MHz
All phase angles
20:1
Max
Unit
w
dB
60
%
VSWR
ESD protection characteristics
Table 6.
ESD protection characteristics
Test conditions
Class
Human body model
2
Machine model
M3
Moisture sensitivity level
Table 7.
4/16
Typ
VGS = 0 V
Symbol
2.4
Min
IDSS
Table 5.
2.3
Test conditions
Moisture sensitivity level
Test methodology
Rating
J-STD-020B
MSL 3
PD84006L-E
3
Impedance
Impedance
Figure 2.
Current conventions
Table 8.
Impedance data
Freq. (MHz)
ZIN (Ω)
ZDL(Ω)
740
2,52 + j1,42
3,06 + j0,41
750
2,52 + j1,56
3,09 + j0,51
760
2,51 + j1,73
3,12 + j0,64
770
2,46 + j1,84
3,13 + j0,72
780
2,47 + j1,96
3,13 + j0,81
790
2,48 + j2,07
3,13 + j0,87
800
2,45 + j2,22
3,14 + j0,96
810
2,44 + j2,27
3,08 + j1,02
820
2,45 + 2,43
3,05 + j1,04
830
2,41 + j2,57
3,04 + j1,11
840
2,40 + j2,67
2,98 + j1,14
850
2,41 + j2,80
2,99 + j1,24
860
2,38 + j2,92
2,91 + j1,29
870
2,37 + j3,06
2,88 + j1,38
880
2,36 + j3,20
2,81 + j1,40
890
2,37 + j3,25
2,70 + j1,47
900
2,31 + j3,36
2,56 + j1,53
910
2,25 + j3,49
2,50 + j1,62
920
2,16 + j3,57
2,31 + j1,72
930
2,16 + j3,66
2,21 + j1,82
940
2,11 + j3,78
2,11 + j1,96
950
2,06 + j3,86
1,98 + j2,07
5/16
Typical performance
PD84006L-E
4
Typical performance
Figure 3.
Output power and efficiency vs
Figure 4.
frequency Vdd = 7.2 V, Idq = 200 mA
Pin = 24 dBm
7
70
6
65
Gain vs output power
Vdd = 7.2 V, Idq = 200 mA
17
16
Pout
15
60
4
55
3
14
Gain (dB)
5
Efficiency (%)
Output Power (W)
Efficiency
50
13
12
11
740 MHz
850 MHz
950 MHz
10
2
45
9
1
740
760
780
800
820
840
860
880
900
920
940
40
960
8
0.5
1.0
1.5
2.0
Frequency (MHz)
Figure 5.
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Output Power (W)
Input return loss vs frequency
Vdd = 7. 2 V, Idq = 200 mA
Figure 6.
Harmonics vs frequency Vdd=7.2 V,
Idq = 200 mA, Pin = 24 dBm
0
0
-10
-1
-20
H2
-2
H3
Harmonics (dB)
IRL (dB)
Pin=24 dBm
-3
-4
-5
-50
-70
760
780
800
820
840
860
880
Frequency (MHz)
6/16
-40
-60
-6
-7
740
-30
900
920
940
960
-80
740
760
780
800
820
840
860
880
Frequency (MHz)
900
920
940
960
PD84006L-E
Figure 7.
Typical performance
Output power vs frequency and
supply voltage Pin = 24 dBm,
Idq = 200 mA
8
Vcc=5V
Vcc=6V
780 800
820 840
Vcc=7.2V
Vcc=9V
7
Output Power (W)
6
5
4
3
2
1
740 760
860 880
900 920
940 960
Frequency (MHz)
7/16
Test circuit
PD84006L-E
5
Test circuit
Figure 8.
Test circuit schematic
Vcc
1 +
MSub
R3
C3
B1
C4
+ C5
2 -
B2
FR4
H=20 mil
C1
R2
L1
C2
R1
TL4
TL5
C10
RFin
TL1
C6
C7
Table 9.
TL2
C8
C11
C13
RFout
C12
TL3
C9
LDMOS
PD84006L
PD84006L-E
Part list
Component ID
Description
B1, B2
Ferrite Bead
C1, C2
Capacitor
150 pF
C3
Capacitor
C4
8/16
TL6
Value
Case size
Manufacturer
Part code
Panasonic
EXCELDRC35C
0603
Murata
GRM39-C0G151J50D500
1 nF
0603
Murata
GRM39COG102J50D500
Capacitor
10 nF
0603
Murata
GRM39X7R103K50C560_
C5
Capacitor
10 uF
SMT
Panasonic
EEVHB1V100P
C6, C13
Capacitor
39 pF
0603
Murata
GRM39-C0G390J50D500
C7
Capacitor
3,3 pF
0603
Murata
GQM1885C2A3R3C
C8
Capacitor
8,2 pF
0603
Murata
GQM1885C1H8R2D
C9
Capacitor
18 pF
0603
Murata
GQM1885C1H180J
C10
Capacitor
15 pF
0603
Murata
GQM1885C1H150J
C11
Capacitor
12 pF
0603
Murata
GQM1885C1H120J
C12
Capacitor
4,7 pF
0603
Murata
GQM1885C2A4R7
L1
Inductor
12.55 nH
Coilcraft
1606-10
PD84006L-E
Table 9.
Test circuit
Part list (continued)
Component ID
Description
Value
Case size
Manufacturer
R1
Resistor
56 Ω
0603
Tyco electronics
R2
Potentiometer
10 KΩ
R3
Resistor
1K
0603
TL1
Transmission line
W=0.92mm
L= 13,50 mm
TL2
Transmission line
W=0.92mm
L= 3,15 mm
TL3
Transmission line
W=0.92mm
L= 2,90 mm
TL4
Transmission line
W=0.92mm
L= 2,00 mm
TL5
Transmission line
W=0.92mm
L= 2,20 mm
TL6
Transmission line
W=0.92mm
L= 13,20 mm
RF in, RF out
SMA-CONN
50 Ω
60 mils
PD84006L-E
LDMOS
Board
Part code
Bourns electronics
3214W-1-103E
Tyco electronics
01623440-1
JOHNSON
142-0701-801
STMicroelectronics
PD84006L-E
FR-4 THk=0.020" 2OZ Cu both sides
9/16
Circuit layout and photo
6
Circuit layout and photo
Figure 9.
Circuit layout
Figure 10. Demoboard photo
10/16
PD84006L-E
PD84006L-E
7
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
11/16
Package mechanical data
Table 10.
PD84006L-E
Tape and reel dimensions
Mm
Dim.
Min.
Typ
Max.
Ao
5.15
5.25
5.35
Bo
5.15
5.25
5.35
Ko
1.0
1.1
1.2
Figure 11. Tape and reel dimensions
12/16
PD84006L-E
Package mechanical data
Figure 12. PowerFLAT™ (5x5) recommended footprint
13/16
Package mechanical data
Table 11.
PD84006L-E
PowerFLAT™ (5x5) mechanical data
mm
inch
Dim.
Min
Typ
Max
A
0.90
A1
0.02
A3
0.24
Typ
Max
1.00
0.035
0.039
0.05
0.001
0.002
0.009
AA
0.15
0.25
0.35
0.006
0.01
0.014
b
0.43
0.51
0.58
0.017
0.020
0.023
c
0.64
0.71
0.79
0.025
0.028
0.031
D
5.00
0.197
d
0.30
0.011
E
5.00
0.197
E2
2.49
2.57
2.64
0.098
0.101
e
1.27
0.050
f
3.37
0.132
g
0.74
0.03
h
0.21
0.008
Figure 13. PowerFLAT™ (5x5) package dimensions
14/16
Min
0.104
PD84006L-E
8
Revision history
Revision history
Table 12.
Document revision history
Date
Revision
Changes
31-Jul-2007
1
First release
29-Jan-2008
2
Added: Section 3: Impedance on page 5, Section 4: Typical
performance on page 6, Section 5: Test circuit on page 8,Section 6:
Circuit layout and photo on page 10
15-Jul-2008
3
Marking change from 8406 to 84006 see Table 1
15/16
PD84006L-E
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16