FTR-LY SERIES POWER RELAY 1 POLE - 6A (Medium Load Control) SLIM TYPE FTR-LY Series RoHS compliant n FEATURES Slim(15.0mm(h) x 5.0 mm(w) x 28.0mm (l) Mounting space: 140mm2, weight: 5.0g l High insulation in small package (between coil and contacts) - Insulation Distance: 8mm min.) - Dielectric strength: 4,000 VAC - Surge strength: 6,000V l Plastic materials - UL94 flame class V-0 - CTI>250 (UL CTI level class 2) l UL, CSA, VDE, SEMKO under approval - UL: conforms to UL508, 1604 - CSA: conforms to CSA22.2 No.14 - SEMKO: conforms to EN61058-1, 61095 - VDE: conforms to VDE 0435, 0631, 0700 l Contains no lead and features cadmium-free contacts l Socket type available l RoHS Compliant since production l l n ORDERING INFORMATION [Example] FTR-LY A A 005 Y (a) (b) (c) (d) (e) SK (f) (a) Series Name FTR-LY: FTR-LY Series (b) Contact Arrangement A C : 1 form A : 1 form C (c) Coil Type / Enclosure A : Standard / Plastic sealed (d) (e) (f) Nominal Voltage 012 Contact Material 005 : 5 VDC, 006 : 6VDC, : 12VDC, 024 : 24VDC, 048 : 48VDC Y : Silver alloy V : Gold plated silver alloy Socket Type NIL SK P: 1 form A (Right Angle Type) R: 1 form C (Right Angle Type) : PCB mounting type : Socket mounting type (contact arrangement A&C only) Actual marking does not carry the type name : "FTR" and "SK" E.g.: Ordering code: FTR-LYAA012Y Actual marking: LYAA012Y FTR-LY SERIES n SPECIFICATIONS It em Contact FTR-LY Arrangemen t 1 form C Material Gold plated silver alloy, silver alloy Style Singl e Resistance (initial) Maximum 100m ohm s Rating 6A 250VAC or 6A 30VD C Maximum Carrying Current 6A Maximum Switching Power 1,500VA Maximum Switching Voltage 250VAC Minimum Switching Load* 10mA 5VDC Maximum Switching Current 6A Operating Temperature -40° C to +85° C (no frost ) Rating Power 170m W Must operate power 75mW Max. allowable voltage 150% of nominal voltage (at 20 deg.) Operate Time (without diode) Maximum 8m s (at nominal voltage, no bounce) Release Time (without diode) Maximum 4m s (at nominal voltage, no bounce) Resistance (at 500VDC ) Minimum 1,000 Mohm s 1 Coil Time Value Insulation Dielectric Strength Life 1,000 VAC 1 minute Between coil and 4,000 VAC 1 minute contacts Surge Strength 6,000V (at 1.2 x 50 micro sec. ) Mechanical 10 x 106 operations minimum Electrical Other Between open contacts 1 form A 60 x103 ops. min. (N.O.) AC contact ratin g 30 x103 ops. min. (N.C.) at 6A 250VAC/30VDC Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 1.0mm Endurance 10-55 Hz, at double amplitude of 1.5m m Shock Resistance Misoperation Min. 50m/s2 (11±1ms) Endurance Min. 1,000m/ s2 (6±1ms) Weight Min. 100m/ s2 (11±1ms) Approximately 4 g FTR-LY SERIES n COIL DATA CHART Co i l No m i n al Res i s t an c e Vo l t ag e (± 10%) Mo d el 1 form A type 1 form C typ e FTR-LYAA005Y(-SK) FTR-LYCA005Y(-SK ) FTR-LYAA006Y(-SK) FTR-LYCA006Y(-SK ) 5VD C 6VD C FTR-LYAA012Y(-SK) FTR-LYCA012Y(-SK ) 12VD C FTR-LYAA024Y(-SK) FTR-LYCA024Y(-SK ) 24VD C FTR-LYAA048Y(-SK) FTR-LYCA048Y(-SK ) 48VD C FTR-LYPA005Y FTR-LYRA005 Y 5VD C FTR-LYPA006Y FTR-LYRA006 Y 6VD C FTR-LYPA012Y FTR-LYPA024Y FTR-LYPA048Y FTR-LYRA012 Y FTR-LYRA024 Y FTR-LYRA048 Y 12VD C 24VD C 48VD C Mu s t Operate Vo l t ag e Mu s t Release Vo l t ag e No m i n al P o w er 14 7 Ω 21 2 Ω 3.3VDC 4.0VDC 0.25VD C 0.3VD C 170m W 170m W 84 7 Ω 3,38 8 Ω 10,60 0 Ω 14 7 Ω 21 2 Ω 8.0VDC 15.9VDC 31.7VDC 3.3VDC 4.0VDC 0.6VD C 1.2VD C 2.4VD C 0.25VD C 0.3VD C 170m W 170m W 217m W 170m W 170m W 84 7 Ω 3,38 8 Ω 10,60 0 Ω 8.0VDC 15.9VDC 31.7VDC 0.6VD C 1.2VD C 2.4VD C 170m W 170m W 217m W Note: All values in the table are measured at 20˚C. n DIMENSIONS 3.5 0.5 15 max. Thru hole type 1 0.5 (0.7) 1 1 0.5 3.78 Pre-soldering 5.04 5.04 (1.2) 16.38 5 max. 28 max. Drilling Plan (BOTTOM VIEW) Wiring Diagram (BOTTOM VIEW) (0.7) 3.78±0.1 3-O1.3±0.1 (4.9) (*1) 5.04±0.1 5.04±0.1 (1.2) 2-O1±0.1 16.38±0.1 (27.8) *1: This terminal is not applicable for 1 form A type Unit: mm FTR-LY SERIES n DIMENSIONS Right Angle type 3 15.5 15 max. 0.5 1 0.5 (0.7) 3.78 1 Pre-soldering 1 5.04 5.04 16.38±0.1 28 max. Drilling Plan (Bottom view) (X 1) Wiring Diagram (Bottom view) (0.7) 3.78±0.1 5.04±0.1 5.04±0.1 16.38±0.1 (27.8) (4.9) 3-O1.3±0.1 (1.2) 2-O1±0.1 (X 1) (X 1): this terminal is not applicable for 1 form A type Unit: mm FTR-LY SERIES n DIMENSIONS Socket type Coil Voltage (example) 0.4 2-R0.7 2 1.2 F&T LYCA024V 24V 3 DC 0320 û 3.5 0.7 0.5 60 6.3 max. 15 max. 2-R0.8 2-R0.3 Type Name (example) 1 0.5 (0.7) 1 1 0.5 Country Name Date Code (example) Schematics (BOTTOM VIEW) PC Board Mounting Hole Layout (BOTTOM VIEW) (1.2) 5.04±0.1 5.04±0.1 (0.7) 3.7±0.1 (4.9) 3O1.3±0.1 2O1±0.1 16.38±0.1 (27.8) (30.6) Unit: mm Notes: 1. Socket ordering code 2. Standard IC socket is not recommended. Please use JM-6N FTR-LY SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-LY SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 02/08/2006.