NL7SZ19 1−to−2 Decoder/ Demultiplexer The NL7SZ19 is a 1−to−2 decoder. When the output enable (E) is Low, the device passes data at input A to outputs Y0 (true) and Y1 (complement). The NL7SZ19 can also be used as a 1−to−2 demultiplexer. As a demultiplexer, data at input E is routed to either Y0 or Y1 depending on the state of A. The device operates over the voltage range from 1.65 V to 5.5 V. The device is fabricated in sub−micron CMOS for high speed and fast decode times. Both inputs and outputs are in high impedance state, when supply voltage is powered down. Both inputs are tolerant of voltages up to 5.5 V, regardless of operating voltage. This device is suitable for low power decoding in a variety of applications. Features http://onsemi.com MARKING DIAGRAM 6 6 LE M G G 1 SOT−363/SC70−6/SC−88 DF SUFFIX CASE 419B 1 • High−Speed Propagation Delay: • • • • • • tPD 2.7 nS (Typ), Load 50 pF @ 5.0 V 32 mA Output Drive Capability @ 5.0 V Power Down Impedance: Inputs/Outputs in High−Z Broad VCC Operating Range: 1.65 V to 5.5 V Surface Mount Technology: SC−70, 6−Lead and UDFN6 Packaging OVT* on I/Os Pb−Free Package is Available Typical Applications • • • • UM G 1 UDFN6 MU SUFFIX CASE 517AA LE, U M G (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. Cell Phones PDAs Digital Cameras Video Cameras PIN/FUNCTION TABLE Function Description Important Information • ESD Protection: Human Body Model >2000 V • Latchup Max Rating: 300 mA • Pin to Pin Compatible with NC7SZ19 A 1 6 Y0 GND 2 5 VCC E = Device Marking = Date Code* = Pb−Free Package 3 4 Pin As Decoder As Demultiplexer A Address Select E Output Enable Data Y0 Output 0 Output 0 Y1 Output 1 Output 1 TRUTH TABLE Y1 (TOP VIEW) E A L L H H L H H L Y0 = A + E Y1 = A + E L H H H H L H H Figure 1. Pinout *Over Voltage Tolerance (OVT) enables input and output pins to function outside (higher) of their operating voltages, with no damage to the devices or to signal integrity. © Semiconductor Components Industries, LLC, 2007 February, 2007 − Rev. 10 1 ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Publication Order Number: NL7SZ19/D NL7SZ19 MAXIMUM RATINGS Symbol Rating Value Unit VCC DC Supply Voltage −0.5 to +7.0 V VIN DC Input Voltage −0.5 to +7.0 V DC Output Voltage −0.5 to +7.0 V VOUT IIK DC Input Diode Current @ V1 t −0.5 V −50 mA IOK DC Output Diode Current @ V1 t −0.5 V −50 mA IOUT DC Output Sink Current "50 mA ICC DC Supply Current per Supply Pin "100 mA IGND DC Ground Current per Ground Pin "100 mA TSTG Storage Temperature Range −65 to +150 °C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 °C TJ Junction Temperature Under Bias +150 °C qJA Thermal Resistance (Note 1) 250 °C/W PD Power Dissipation in Still Air at 85°C 180 mW Level 1 − UL 94 V−0 @ 0125 in − > 2000 > 150 n/a V MSL Moisture Sensitivity FR Flammability Rating VESD Oxygen Index: 28 to 34 ESD Withstand Voltage Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA/JESD22−A114−A. 3. Tested to EIA/JESD22−A115−A. 4. Tested to JESD22−C101−A. RECOMMENDED OPERATING CONDITIONS Symbol Rating Value Unit VCC DC Supply Voltage 1.65 to 5.5 V VCC DC Supply Voltage, Data Retention 1.5 to 5.5 V VIN Input Voltage 0 to 5.5 V Output Voltage 0 to 5.5 V −40 to 85 °C 0 to 20 0 to 20 0 to 10 0 to 5 nS/V 350 °C/W VOUT TA Operating Temperature tr, tf Input Rise and Fall Times qJA Thermal Resistance VCC @ 1.8 " 0.15 V VCC @ 2.5 " 0.2 V VCC @ 3.3 " 0.3 V VCC @ 5.0 " 0.5 V ORDERING INFORMATION Package Shipping † SC70−6 3000 / Tape & Reel NL7SZ19DFT2G SC70−6 (Pb−Free) 3000 / Tape & Reel NL7SZ19MUR2G UDFN6 (Pb−Free) 3000 / Tape & Reel Device Order Number NL7SZ19DFT2 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 NL7SZ19 DC ELECTRICAL CHARACTERISTICS Symbol Parameter VIH High−Level Input Voltage VIL Low−Level Output Voltage VOH High−Level Output Voltage VOL Low−Level Output Voltage IIN Input Leakage Current IOFF Power−Off Leakage Current ICC Quiescent Supply Current Condition TA = 255C VCC (V) Min 1.65 2.3 to 5.5 0.75 VCC 0.70 VCC Typ Min Max Unit 0.75 VCC 0.70 VCC 1.65 2.3−5.5 VIN = VIH or VIL TA = −405C to 855C Max 0.25 VCC 0.30 VCC V 0.25 VCC 0.30 VCC V IOH = −100 mA 1.65 2.3 3.0 4.5 1.55 2.20 2.90 4.40 1.65 2.30 3.00 4.50 1.55 2.20 2.90 4.40 IOH = −3.0 mA IOH = −8.0 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA 1.65 2.3 3.0 3.0 4.5 1.29 1.90 2.40 2.30 3.80 1.47 2.10 2.75 2.63 4.15 1.29 1.90 2.40 2.30 3.80 IOL = 100 mA 1.65 2.3 3.0 4.5 0.0 0.0 0.0 0.0 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 IOL = 3.0 mA IOL = 8.0 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 1.65 2.3 3.0 3.0 4.5 0.09 0.12 0.20 0.30 0.32 0.24 0.30 0.40 0.55 0.55 0.24 0.30 0.40 0.55 0.55 V 0.0 to 5.5 "0.1 "1.0 mA 0.0 1.0 10 mA 1.65 to 5.5 1.0 10 mA VIN = VIL or VIH VIN = 5.5 V, GND VIN or VOUT = 5.5 V VIN = 5.5 V, GND V AC ELECTRICAL CHARACTERISTICS TA = 255C Symbol tPLH tPHL Parameter Propagation Delay A or S to Y0 or Y1 TA = −405C to 855C Condition VCC Min Typ Max Min Max Unit Figure CL = 15 pF RD = 1.0 MW 1.8 " 0.15 2.5 " 0.2 3.3 " 0.3 5.0 " 0.5 2.5 1.2 0.8 0.5 6.2 3.6 2.9 2.4 10.5 6.0 4.1 3.2 2.5 1.2 0.8 0.5 11 6.4 4.5 3.5 nS Figures 1&3 CL = 50 pF RD = 500 W 3.3 " 0.3 5.0 " 0.5 1.2 0.8 3.2 2.7 5.1 4.0 1.2 0.8 5.4 4.3 nS Figures 1&3 Note 5 CIN Input Capacitance 0 2.3 pF CPD Power Dissipation Capacitance 3.3 5.0 10.5 12.8 pF Figure 2 5. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle (see Figure 2). CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICCDstatic). http://onsemi.com 3 NL7SZ19 VI OPEN GND VCC A RU OUTPUT A S INPUT A OUTPUT RD CL Figure 1. AC Test Circuit Figure 2. ICCD Test Circuit CL Includes Load and Stray Capacitance Input PRR = 1.0 MHz; tW = 500 ns Input = AC Waveform; tr = tf = 1.8 nS PRR = 10 MHz; Duty Cycle = 50% S Input = GND or x tr = 3 ns tf = 3 ns 90% INPUT VCC 90% 50% 50% 10% 10% GND tW tPHL tPLH VOH Out of Phase OUTPUT 50% 50% VOL tPLH tPHL VOH In Phase OUTPUT 50% 50% VOL Figure 3. AC Waveforms http://onsemi.com 4 NL7SZ19 PACKAGE DIMENSIONS SC−88/SC70−6/SOT−363 CASE 419B−02 ISSUE W D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B−01 OBSOLETE, NEW STANDARD 419B−02. e 6 5 4 1 2 3 HE DIM A A1 A3 b C D E e L HE −E− b 6 PL 0.2 (0.008) M E M MILLIMETERS MIN NOM MAX 0.80 0.95 1.10 0.00 0.05 0.10 0.20 REF 0.10 0.21 0.30 0.10 0.14 0.25 1.80 2.00 2.20 1.15 1.25 1.35 0.65 BSC 0.10 0.20 0.30 2.00 2.10 2.20 A3 C A A1 L SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm Ǔ ǒinches SC−88/SC70−6/SOT−363 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 INCHES NOM MAX 0.037 0.043 0.002 0.004 0.008 REF 0.004 0.008 0.012 0.004 0.005 0.010 0.070 0.078 0.086 0.045 0.049 0.053 0.026 BSC 0.004 0.008 0.012 0.078 0.082 0.086 MIN 0.031 0.000 NL7SZ19 PACKAGE DIMENSIONS UDFN6, 1.2x1.0, 0.4P CASE 517AA−01 ISSUE A PIN ONE REFERENCE 2X 0.10 C NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. A B D ÉÉ ÉÉ ÉÉ E DIM A A1 A3 b D E e L L2 TOP VIEW 2X 0.10 C (A3) 0.10 C MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.127 REF 0.15 0.25 1.00 BSC 1.20 BSC 0.40 BSC 0.30 0.40 0.40 0.50 A 10X 0.08 C 6X C A1 5X 1 MOUNTING FOOTPRINT* SEATING PLANE SIDE VIEW 6X 0.42 0.22 L 3 L2 6X b 0.10 C A B 0.05 C 6 0.40 PITCH 4 e NOTE 3 BOTTOM VIEW 1.07 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NL7SZ19/D