Features Regulated Converters ● ● ● ● ● ● ● ● 4:1 Wide Input Voltage Range 15 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Six-Sided Shield No Derating to 65°C Standard 2” x 1” Package and Pinning Efficiency to 86% Selection Guide 24V and 48V Wide Input Types Output Current mA Input (4,5) Current mA Efficiency(6)Capacitive(7) Load max. % µF Part Number Input Range VDC Output Voltage VDC RP15-243.3SFW 9-36 3.3 4500 60/773 84 14750 RP15-2405SFW 9-36 5 3000 60/777 86 7200 RP15-2412SFW 9-36 12 1250 75/771 85 1250 RP15-2415SFW 9-36 15 1000 75/762 86 800 RP15-483.3SFW 18-75 3.3 4500 30/422 84 14750 RP15-4805SFW 18-75 5 3000 30/381 86 7200 RP15-4812SFW 18-75 12 1250 40/385 85 1250 RP15-4815SFW 18-75 15 1000 40/381 86 800 RP15-2405DFW 9-36 ±5 ±1500 85/801 82 ±3600 RP15-2412DFW 9-36 ±12 ±625 100/771 85 ±625 RP15-2415DFW 9-36 ±15 ±500 100/762 86 ±400 RP15-4805DFW 18-75 ±5 ±1500 45/400 82 ±3600 RP15-4812DFW 18-75 ±12 ±625 50/385 85 ±625 RP15-4815DFW 18-75 ±15 ±500 50/381 86 ±400 POWERLINE DC/DC-Converter RP15S_DFW Series 15 Watt 2” x 1” Single & Dual Output * add /P for CTRL function with Positive Logic (1=ON, 0=OFF) * add /N for CTRL function with Negative Logic (0=ON, 1=OFF) Derating Graph (Ambient Temperature) RP15-4805SFW 125 100 Output Power (%) 75 50 75Vin Natural Convection Nom Vin 25 0 -40 -25 -10 0 50 60 70 80 90 100 110 75 Ambient Temperature Range (°C) 244 November-2006 www.recom-international.com RP15-S_DFW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) 20mAp-p Start Up Time (nominal Vin and constant resistor load) 20ms typ. Remote ON/OFF (Optional. See note 1) DC-DC ON DC-DC OFF Nominal input Remote OFF input current Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA Output Power 15W max. Output Voltage Accuracy (full Load and nominal Vin) ±1% Minimum Load 0% Line Regulation (low line, high line at full load) ±0.2% Load Regulation (0% to 100% full load) Single ±0.5% Dual ±1% Cross Regulation Dual Output (asymmetrical load 25%/100% full load) Ripple and Noise (20MHz bandwith) (measured with a 104pF ceramic across the output) ±5% 3.3, 5.0V 12, 15, ±5, ±12, ±15V 50mVp-p 75mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) Input Voltage Variation, dv/dt 250µs complies with ETS300 132, part 4.4 Over Load Protection (% of full load at nominal Vin) 150% typ Overvoltage Protection (Single) Undervoltage Protection Zener Diode Clamp 24V Input 48V Input Short Circuit Protection DC-DC ON = 9VDC, DC-DC OFF = 8VDC DC-DC ON = 18VDC, DC-DC OFF = 16VDC Continuous, automatic recovery Efficiency Isolation Voltage 5V/ms see „Selection Guide“ table In to Out and I/O to case 1600VDC min. Isolation Resistance 10 GΩ min. Isolation Capacitance 1500pF max. Operating Frequency 400kHz typ. Operating Temperature Range 5.1, 12, 15, ±12, ±15V 3.3, ±5V with derating -40°C to +75°C -40°C to +65°C -40°C to +105°C Maximum Case Temperature +105°C Storage Temperature Range -55°C to +125°C Thermal Impedance (see note 8) Natural convection with Heatsink 12°C/Watt 10°C/Watt Case Material Nickel plated copper Base Material Non-conductive black plastic continued on next page www.recom-international.com November-2006 245 RP15-S_DFW Series POWERLINE DC/DC-Converter Specifications, cont. (typical at nominal input and 25°C unless otherwise noted) Potting Material Epoxy (UL94-V0) Weight 27g Conducted Emissions (see note 3) Radiated Emissions (see note 3) ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. Critera B Perf. Critera A Perf. Critera B Perf. Critera B Perf. Critera A Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH MTBF (see note 2) 2350 x 103 hours Bellcore-TR-NWT-000332 Notes : 1. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SFW/P) Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SFW/N). If no suffix is specified, the control pin will be omitted. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Requires external filter to meet EN55022 Class A 4. Typical value at nominal input voltage and no load. 5. Maximum value at nominal input voltage and full load 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistor load. 8. Optional Heatsink Part Number 7G-0020A Package Style and Pinning (mm) 3rd angle projection DIP24 Package Style 50.80 25.40 10.20 dia. 1.0 5.6 2.50 5.10 20.30 15.20 3 1 2 6 Bottom View Pin Connections 10.20 4 10.20 5 12.70 Pin # Single 1 +Vin 2 -Vin 3 +Vout 4 No Pin 5 -Vout 6* CTRL* * Optional. See Note 1. Dual +Vin -Vin +Vout Com -Vout CTRL* Pin Pitch Tolerance ±0.35 mm 246 November-2006 www.recom-international.com