SANYO LA73062V

Ordering number : ENA0909
LA73062V
Monolithic Linear IC
Video Driver for Wideband
Overview
The LA73062V is a wideband video output interface. It is ideal as a driver for Composite, S, YPbPr, and RGB analog
video signal outputs.
Incorporating low pass filters (6/12/30MHz), the LA73062V can also serve as a digital clock noise rejection filter.
Functions
• Six channel output
• 6MHz low pass filter (SD) / 12MHz or 30MHz low pass filter (HD)
• 6dB amplifier
• Output mute
• Y/C_MIX
• S_DC_Output
• D_DC_Output
• Standby mode
Specifications
Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VCC max
Allowable power dissipation
Pd max
Operating temperature
Topr
-20 to +75
°C
Storage temperature
Tstg
-40 to +150
°C
Ta≤75°C, Mounted on a circuit board*
6.0
V
780
mW
* Mounted on a specified board: 114.3mm×76.1mm×1.6mm, glass epoxy.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
82907 TI IM 20070410-S00002 No.A0909-1/12
LA73062V
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Recommended supply voltage
VCC
Operating supply voltage range
VCCopg
Input pin voltage application range
VIN
Conditions
Ratings
Unit
5.0
V
4.75 to 5.25
V
-0.3 to Vccopg+0.3
V
Electrical Characteristics at Ta=25°C, VCC=5.0V
Input signal
Parameter
Point
Signal
Out
Level
Freq
[Vpp]
[Hz]
Ratings
Test Condition
Point
unit
min
typ
max
Current consumption 1
At a no signal.
68
86
104
mA
Current consumption 2
Standby mode. At a no signal.
0.0
0.5
1.0
mA
2.8
3.0
3.2
V
5.5
6.0
6.5
dB
5.5
6.0
6.5
dB
-3.0
0.0
3.0
dB
-3.0
0.0
3.0
dB
-40
-30
dB
-40
-30
dB
-3.0
0.0
3.0
dB
-3.0
0.0
3.0
dB
-40
-30
dB
-40
-30
dB
-1.0
0.0
1.0
dB
-1.0
0.0
1.0
dB
-4.0
-1.5
1.0
dB
-4.0
-1.5
1.0
dB
-40
-30
dB
Internal reference regulator
REG3V
T30
Video driver part
Voltage gain 1
T2A
CV,Y,Py,R,G,B
T2A
SIG1
0.3
100k
T34
T15A
T22
T13A
T24
T15A
T22
T17A
T36
T20
Voltage gain 2
T4A
C,Pr,Pb
T13A
T24
T17A
T20
Frequency response 1(SD)
T2A
CV,Y
T2A
Frequency response 2(SD)
T4A
Output gain
SIG3
SIG1
SIG3
0.3
0.3
0.3
100k
6M
6M
T32
Output gain
T36
6MHzLPF is selected.
T34
f=6MHz/100kHz
T32
6MHzLPF is selected.
C
f=6MHz/100kHz
Frequency response 3(SD)
T2A
CV,Y
T2A
Frequency response 4(SD)
T4A
SIG1
SIG3
0.3
0.3
27M
27M
T36
6MHzLPF is selected.
T34
f=27MHz/100kHz
T32
6MHzLPF is selected.
C
f=27MHz/100kHz
Frequency response 5(HD)
T15A
T22
12MHzLPF is selected.
Py,R,G,B
T13A
T24
f=12MHz/100kHz
T15A
T22
SIG1
0.3
12M
T20
T17A
Frequency response 6(HD)
T13A
SIG3
Pr,Pb
T17A
Frequency response 7(HD)
T15A
Py,R,G,B
T13A
T15A
T22
SIG1
0.3
0.3
12M
75M
T24
12MHzLPF is selected.
T20
f=12MHz/100kHz
T22
12MHzLPF is selected.
T24
f=75MHz/100kHz
T20
T17A
Frequency response 8(HD)
T13A
SIG3
Pr,Pb
T17A
Frequency response 9(HD)
T15A
Py,R,G,B
T13A
T15A
T22
SIG1
0.3
0.3
75M
20M
T17A
T24
12MHzLPF is selected.
T20
f=75MHz/100kHz
T22
30MHzLPF is selected.
T34
f=20MHz/100kHz
T20
Frequency response 10(HD)
T13A
SIG3
Pr,Pb
T17A
Frequency response 11(HD)
T15A
Py,R,G,B
T13A
T15A
T22
SIG1
0.3
0.3
20M
30M
T17A
T24
30MHzLPF is selected.
T20
f=20MHz/100kHz
T22
30MHzLPF is selected.
T34
f=30MHz/100kHz
T20
Frequency response 12(HD)
T13A
SIG3
Pr,Pb
T17A
Frequency response 13(HD)
T15A
Py,R,G,B
T13A
T15A
T22
T17A
T20
SIG1
0.3
0.3
30M
75M
T24
30MHzLPF is selected.
T20
f=30MHz/100kHz
T22
30MHzLPF is selected.
T34
f=75MHz/100kHz
Continued on next page.
No.A0909-2/12
LA73062V
Continued from preceding page.
Input signal
Parameter
Out
Level
Freq
[Vpp]
[Hz]
0.3
75M
Ratings
Test Condition
Point
Signal
Frequency response 14(HD)
T13A
SIG3
Pr,Pb
T17A
2nd order distortion 1(SD)
T2A
T36A
6MHzLPF,
CV,Y,Py,R,G,B
T2A
T34A
12MHzLPF is selected.
T15A
T22A
T13A
T24A
T15A
T22A
SIG1
0.7
4M
T4A
C,Pr,Pb
T24
30MHzLPF is selected.
T20
f=75MHz/100kHz
T32A
6MHzLPF,
T13A
T24A
12MHzLPF is selected.
T17A
T20A
SIG3
SIG1
0.7
0.7
4M
2nd order distortion 3(HD)
T15A
Py,R,G,B
T13A
T24A
T15A
T22A
10M
T17A
T22A
T13A
Pr,Pb
T17A
Amount of mute attenuation 1
T2A
CV,Y,Py,R,G,B
T2A
T34
T15A
T22
T13A
T24
T15A
SIG3
0.7
10M
T22
T24A
SIG1
0.7
4M
-30
dB
-40
-30
dB
-40
-30
dB
-40
-30
dB
30MHzLPF is selected.
-40
-30
dB
-60
-50
dB
-60
-50
dB
-60
-50
dB
-60
-50
dB
-70
-60
dB
-60
-50
dB
20
40
ns
20
40
ns
10
20
ns
10
20
ns
10
20
ns
10
20
ns
T20
T4A
C,Pr,Pb
T13A
T24
T17A
T20
T2A
-40
T36
Amount of mute attenuation 2
T2A
max
30MHzLPF is selected.
T20A
T17A
CV,Y,Py,R,G,B
typ
T20A
2nd order distortion 4(HD)
Crosstalk between channels 1
unit
min
T20A
T17A
2nd order distortion 2(SD)
Point
SIG3
SIG1
0.7
0.7
4M
T32
4M
T15A
T13A
T15A
T17A
Crosstalk between channels 2
T4A
C,Pr,Pb
T13A
SIG3
0.7
4M
T17A
Video S/N 1(SD)
T2A
CV,Y
T2A
SIG2
0.65
T36
T34
VIN=Video (50%White)
6MHzLPF is selected.
The band is between 100kHz
and 4.2MHz.
Video S/N 2(HD)
T15A
Py,R,G,B
T13A
T24A
VIN=Video (50%White)
30MHzLPF is selected.
T15A
T22A
The band is between 100kHz
SIG2
0.65
T22A
T20A
T17A
G.D.1(SD)
T2A
CV,Y
T2A
G.D.2(SD)
T4A
SIG1
SIG3
0.3
0.3
6M
6M
and 30MHz.
T36
6MHzLPF is selected.
T34
f=6MHz/100kHz
T32
6MHzLPF is selected.
C
f=6MHz/100kHz
G.D.3(HD)
T15A
T22
12MHzLPF is selected.
Py,R,G,B
T13A
T24
f=12MHz/100kHz
T15A
T22
SIG1
0.3
12M
T20
T17A
G.D.4(HD)
T13A
SIG3
Pr,Pb
T17A
G.D.5(HD)
T15A
T22A
30MHzLPF is selected.
Py,R,G,B
T13A
T24A
f=30MHz/100kHz
T15A
T22A
SIG1
0.3
0.3
12M
30M
T17A
G.D.6(HD)
T13A
Pr,Pb
T17A
T24
12MHzLPF is selected.
T20
f=12MHz/100kHz
T20A
SIG3
0.3
30M
T24
30MHzLPF is selected.
T20
f=30MHz/100kHz
No.A0909-3/12
LA73062V
Pin Control Table
SW No.
IN_Pin No.
OUT_Pin No.
Control voltage
SW function name
High (2.3V to VCC)
Open
Low (0 to 0.7V)
SW1
Pin3
SD_MUTE_CTL
SD_MUTE_OFF
SD_MUTE_ON
SW2
Pin7
Power_Save_CTL
Power_Save_OFF
Power_Save_ON
SW3
Pin11
Input_CTL
CLAMP_ON
BIAS_ON (Component_Mode)
(RGB_Mode)
SW4
Pin14
Filter_CTL
12MHz_LPF_ON
30MHz_LPF_ON
SW5
Pin16
HD_MUTE_CTL
HD_MUTE_OFF
S_DC
Pin6
Pin31
S_DET
High (4.0V to VCC)
Midd (1.8 to 2.4V)
HD_MUTE_ON
Low (0 to 0.5V)
D_L1
Pin8
Pin29
D_LINE1
High (4.0V to VCC)
Midd (1.8 to 2.4V)
Low (0 to 0.5V)
D_L2
Pin9
Pin28
D_LINE2
High (4.0V to VCC)
D_L3
Pin10
Pin27
D_LINE3
High (4.0V to VCC)
Low (0 to 0.5V)
Midd (1.8 to 2.4V)
Low (0 to 0.5V)
Package Dimensions
unit : mm (typ)
3247A
7.6
19
0.5
5.6
36
1
18
0.2
(0.7)
0.8
(1.5)
0.1
15.0
1.7max
0.3
SANYO : SSOP36(275mil)
No.A0909-4/12
LA73062V
Block Diagram
MUTE
VCC_SD
1
36
6MHz
LPF
+
Y_IN
0.1 F
2
6dB
6MHz
LPF
CLAMP
35
C_IN
SW1
3
34
6dB
1000 F
+
75
CV_OUT
75
Driver
MUTE
SW1:SD Mute CTL
SW1
VCC_DR_SD
1000 F
+
75
Y_OUT
75
Driver
0.1 F
4
BIAS
100k
6MHz
LPF
33
GND_DR_SD
C_OUT
MUTE
GND_SD
SW1
5
32
6dB
REG3V
S_DET_IN
(High/Open/Low)
6
SW2:Power
Save CTL
7
31
30
8
5V/2.2V/0V
29
9
5V/0V
28
5V/2.2V/0V
27
D_LINE3_IN
(High/Open/Low)
Pr/R_IN
1 F
+
Py/G_IN
1 F
+
11
12
CLAMP
SW3
12MHz
LPF
Pb/B_IN
1 F
+
10k
D_LINE1_OUT
D_LINE2_OUT
6dB
15
25
VCC_DR_HD
23
MUTE
SW4
SW5
22
CLAMP
6dB
21
SW3
12MHz
LPF
MUTE
SW4
SW5
20
17
30MHz
LPF
6dB
18
75
Pr/R_OUT
75
N.C.
1000 F
+
75
Py/G_OUT
75
Driver
16
CLAMP
330 F
+
Driver
14
12MHz
LPF
D_LINE3_OUT
N.C.
24
30MHz
LPF
10k
26
SW5
13
BIAS
100k
GND_HD
MUTE
SW4
30MHz
LPF
SW5:HD Mute CTL
VREG_3V 47 F
+
REG3V
BIAS
100k
SW4:Firter CTL
(12MHz or 30MHz)
S_DET_OUT
10k
10
VCC_HD
10k
REG3V
D_LINE2_IN
(High/Low)
SW3:Input CTL
(CLAMP or BIAS)
75
Driver
VREG_3V
D_LINE1_IN
(High/Open/Low)
75
1 F
+
GND_DR_HD
330 F
+
75
Pb/B_OUT
75
Driver
19
N.C.
Please shorten the distance of the bold line to prevent oscillation.
No.A0909-5/12
LA73062V
Sample Application Circuit
No.A0909-6/12
LA73062V
Test Input Signal
Pin Function
Pin No.
Pin name
P1
VCC_SD
P2
Y_IN
DC voltage
Signal wave form
In put / Out put form
1.8V
10Vpp
500Ω
1.8V
1kΩ
1kΩ
2
110µA
P3
SD_MUTE_CTL
5V: SD_MUTE_OFF
0V: SD_MUTE_ON
10kΩ
3
100kΩ
P4
C_IN
2.3V
2.3V
714mVpp
50µA
100kΩ
4
1kΩ
110µA
Continued on next page.
No.A0909-7/12
LA73062V
Continued from preceding page.
Pin No.
Pin name
P5
GND_SD
P6
S_DET_IN
DC voltage
Signal wave form
In put / Out put form
5V: 16:9
3V_REG
OPEN: 4.3 Letter Box
0V: 4:3
200kΩ
10kΩ
6
200kΩ
P7
Power_Save_CTL
5V: Power_Save_OFF
0V: Power_Save_ON
10kΩ
7
100kΩ
P8
D_LINE1_IN
5V: 1125 (1080)
3V_REG
OPEN: 750 (720)
200kΩ
0V: 525 (480)
10kΩ
8
200kΩ
P9
D_LINE2_IN
5V: 59.94p/60p
0V: 59.94i/60i
10kΩ
9
100kΩ
P10
D_LINE3_IN
5V: 16:9
3V_REG
OPEN: 4:3 Letter Box
200kΩ
10kΩ
0V: 4:3
10
200kΩ
P11
INPUT_CTL
5V: Clamp
0V: Bias
10kΩ
11
100kΩ
Continued on next page.
No.A0909-8/12
LA73062V
Continued from preceding page.
Pin No.
Pin name
P12
VCC_HD
P13
Pr/R_IN
DC voltage
Signal wave form
In put / Out put form
Component: 2.3V (Bias)
RGB: 1.8V (Clamp)
500Ω
700mVpp
2.3V
1kΩ
1kΩ
Clamp:OFF
700mVpp
13
100kΩ
110µA
1.8V
Bias:OFF
50µA
P14
FIL_CTL
5V: 12MHz_LPF
0V: 30MHz_LPF
10kΩ
14
100kΩ
P15
Py/G_IN
1.8V
1.0Vpp
500Ω
1.8V
700mVpp
1kΩ
15
1.8V
1kΩ
110µA
P16
HD_MUTE_CTL
5V: HD_MUTE_OFF
0V: HD_MUTE_ON
10kΩ
16
100kΩ
P17
Pb/B_IN
Component: 2.3V (Bias)
RGB: 1.8V (Clamp)
500Ω
700mVpp
2.3V
Clamp:OFF
700mVpp
17
1.8V
Bias:OFF
1kΩ
1kΩ
100kΩ
110µA
50µA
Continued on next page.
No.A0909-9/12
LA73062V
Continued from preceding page.
Pin No.
Pin name
P18
GND_HD
P19
N.C.
P20
Pb/B_OUT
DC voltage
Signal wave form
In put / Out put form
Component: 2.4V (Bias)
RGB: 1.3V (Clamp)
1.4Vpp
2.4V
30Ω
1.3kΩ
1.5kΩ
1.4Vpp
1.3V
20
30Ω
P21
GND_DR_HD
P22
Py/G_OUT
1.3V
2.0Vpp
30Ω
1.3V
1.3kΩ
1.5kΩ
1.4Vpp
22
1.3V
30Ω
P23
N.C.
P24
Pr/R_OUT
Component: 2.4V (Bias)
RGB: 1.3V (Clamp)
1.4Vpp
2.4V
30Ω
1.3kΩ
1.5kΩ
1.4Vpp
1.3V
24
30Ω
P25
VCC_DR_HD
P26
N.C.
P27
D_LINE3_OUT
5V: 16:9
2.2V: 4:3 Letter Box
0V: 4:3
High:OFF
OPEN:OFF
300Ω
27
500µA
Low:OFF
Continued on next page.
No.A0909-10/12
LA73062V
Continued from preceding page.
Pin No.
P28
Pin name
D_LINE2_OUT
DC voltage
Signal wave form
In put / Out put form
5V: 59.94p/60i
0V: 59.94i/60i
300Ω
P29
D_LINE1_OUT
28
5V: 1125 (1080)
2.2V: 750 (720)
High:OFF
0V: 525 (480)
OPEN:OFF
300Ω
29
500µA
Low:OFF
P30
REG3V
3.0V
50Ω
100Ω
P31
S_DET_OUT
26kΩ
32kΩ
30kΩ
24kΩ
30
5V: 16:9
2.2V: 4:3 Lerrer Box
0V: 4:3
High:OFF
OPEN:OFF
300Ω
31
500µA
Low:OFF
P32
C_OUT
2.4V
2.4V
1.428Vpp
30Ω
1.3kΩ
1.5kΩ
32
30Ω
P33
GND_DR_SD
Continued on next page.
No.A0909-11/12
LA73062V
Continued from preceding page.
Pin No.
P34
Pin name
Y_OUT
DC voltage
Signal wave form
In put / Out put form
1.3V
2.0Vpp
30Ω
1.3V
1.3kΩ
1.5kΩ
34
30Ω
P35
VCC_DR_SD
P36
CV_OUT
1.3V
2.0Vpp
1.3V
30Ω
1.3kΩ
36
30Ω
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of August, 2007. Specifications and information herein are subject
to change without notice.
PS No.A0909-12/12