2STF1360 2STN1360 LOW VOLTAGE FAST-SWITCHING NPN POWER TRANSISTORS Features ■ VERY LOW COLLECTOR-EMITTER SATUARATION VOLTAGE ■ HIGH CURRENT GAIN CHARACTERISTIC ■ FAST-SWITCHING SPEED ■ IN COMPLANCE WITH THE 2002/93/EC EUROPEAN DIRECTIVE ■ SURFACE MOUNTING DEVICES IN MEDIUM POWER SOT-223 AND SOT-89 PACKAGES ■ AVAILABLE IN TAPE & REEL PACKING 2 1 SOT-223 2 3 SOT-89 Applications ■ EMERGENCY LIGHTING ■ LED ■ CCFL DRIVERS (BACK LIGHTING) ■ VOLTAGE REGULATION ■ RELAY DRIVER Internal Schematic Diagram Description The 2STF1360 and 2STN1360 are NPN transistors manufactured using new “PB-HDC” (Power Bipolar High Density Current) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. Order Codes Part Number Marking Package Packing 2STF1360 2STN1360 1360 N1360 SOT-89 SOT-223 Tape & Reel Tape & Reel November 2005 rev.1 1/11 www.st.com 11 2STF1360 - 2STN1360 1 Absolute Maximum Ratings 1 Absolute Maximum Ratings Table 1. Absolute Maximum Rating Symbol Parameter Value Unit 2STF1360 2STN1360 SOT-89 SOT-223 VCBO Collector-Base Voltage (IE = 0) 80 V VCEO Collector-Emitter Voltage (IB = 0) 60 V VEBO Emitter-Base Voltage 6 V Collector Current 3 A Collector Peak Current (tP < 5ms) 5 A Base Current 0.2 A IBM Base Peak Current (tP < 5ms) 0.4 A PTOT Total dissipation at Tc = 25°C Tstg Storage Temperature IC ICM IB TJ 1.6 W -65 to 150 °C 150 °C Thermal Data Symbol Parameter RthJ-amb # 2/11 1.4 Max. Operating Junction Temperature Table 2. Note: (IC = 0) Thermal Resistance Junction-Ambient ______ ______Max # Device mounted on a PCB area of 1 cm 2. SOT-89 SOT-223 89 78 °C/W 2STF1360 - 2STN1360 2 2 Electrical Characteristics Electrical Characteristics Table 3. Symbol Electrical Characteristics (TCASE = 25°C; unless otherwise specified) Parameter Test Conditions Min. Typ. Max. Unit ICBO Collector Cut-off Current (IE = 0) VCB = 80 V 100 nA IEBO Emitter Cut-off Current (IC = 0) VEB = 6 V 100 nA VBE Base-Emitter Voltage VCE = 2 V 670 730 mV 150 210 300 500 mV mV 0.89 1.2 V 280 400 17 81 620 54 20 100 720 65 VCE(sat) Note: 1 VBE(sat) Note: 1 hFE Collector-Emitter Saturation Voltage IB = 100 mA IB = 100 mA DC Current Gain IC = 100 mA _ VCE = 2 V IC = 1 A _ VCE = 2 V VCC = 10 V IC = 3 A tf fT Transition Frequency ts 630 __ _ IB = 150 mA IC = 2 A __ _ RESISTIVE LOAD Delay Time Rise Time Storage Time Fall Time tr IC = 2 A __ _ IC = 3 A Base-Emitter Saturation Voltage Note: 1 td IC = 100 mA IB1 = - IB2 = 300 mA (see figure 8) IC = 0.1 A ___ VCE = 10 V 80 160 130 ns ns ns ns MHz Note: 1 Pulsed duration = 300 µs, duty cycle ≤1.5%. 3/11 2STF1360 - 2STN1360 2 Electrical Characteristics 2.1 Typical Characteristics Figure 1. DC Current Gain Figure 3. Collector Emitter Saturation Voltage Figure 4. Base Emitter Saturation Voltage Figure 5. Resistive Load Switching Times Resistive LoadSwitching Times 4/11 Figure 2. Figure 6. DC Current Gain 2STF1360 - 2STN1360 Figure 7. 2 Electrical Characteristics Reverse Bised SOA 5/11 3 Test Circuits 3 Test Circuits Figure 8. Resistive Load Switching Test Circuit 1) Fast electronic switch 2) Non-inductive Resisitor 6/11 2STF1360 - 2STN1360 2STF1360 - 2STN1360 4 4 Package Mechanical Data Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/11 2STF1360 - 2STN1360 4 Package Mechanical Data SOT-89 MECHANICAL DATA mm DIM. MIN. TYP. mils MAX. MIN. TYP. MAX. A 1.4 1.6 55.1 63.0 B 0.44 0.56 17.3 22.0 B1 0.36 0.48 14.2 18.9 C 0.35 0.44 13.8 17.3 C1 0.35 0.44 13.8 17.3 D 4.4 4.6 173.2 181.1 D1 1.62 1.83 63.8 72.0 E 2.29 2.6 90.2 102.4 e 1.42 1.57 55.9 61.8 e1 2.92 3.07 115.0 120.9 H 3.94 4.25 155.1 167.3 L 0.89 1.2 35.0 47.2 P025H 8/11 2STF1360 - 2STN1360 4 Package Mechanical Data SOT-223 MECHANICAL DATA mm DIM. MIN. TYP. A inch MAX. MIN. TYP. 1.80 MAX. 0.071 B 0.60 0.70 0.80 0.024 0.027 0.031 B1 2.90 3.00 3.10 0.114 0.118 0.122 c 0.24 0.26 0.32 0.009 0.010 0.013 D 6.30 6.50 6.70 0.248 0.256 0.264 e 2.30 0.090 e1 4.60 0.181 E 3.30 3.50 3.70 0.130 0.138 0.146 H 6.70 7.00 7.30 0.264 0.276 0.287 10o V A1 10o 0.02 P008B 9/11 2STF1360 - 2STN1360 5 Revision History 5 10/11 Revision History Date Revision 21-Nov-2005 1 Changes Initial Release 2STF1360 - 2STN1360 5 Revision History Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11