STC08DE150HP Hybrid emitter switched bipolar transistor ESBT® 1500V - 8A - 0.075 W Preliminary Data General features Table 1. General features VCS(ON) IC RCS(ON) 0.6V 8A 0.075Ω ■ Low equivalent on resistance ■ Very fast-switch, up to 150 kHz ■ Squared RBSOA, up to 1500 V ■ Very low CISS driven by RG = 47 Ω ■ In compliance with the 2002/93/EC European Directive TO247-4L HP Description Internal schematic diagrams The STC08DE150HP is manufactured in a hybrid structure, using dedicated high voltage Bipolar and low voltage MOSFET technologies, aimed at providing the best performance in ESBT topology. The STC08DE150HP is designed for use in aux flyback smps for any three phase application. Applications ■ Single switch SMPS based on three phase mains Order codes Part Number Marking Package Packing STC08DE150HP C08DE150HP TO247-4L HP Tube October 2006 Rev 1 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/11 www.st.com 11 STC08DE150HP Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 STC08DE150HP 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit 1500 V VCS(SS) Collector-source voltage (V BS =VGS =0V) VBS(OS) Base-source voltage (IC =0, VGS =0V) 30 V VSB(OS) Source-base voltage (IC =0, VGS =0V) 9 V ± 20 V Collector current 8 A Collector peak current (tP < 5ms) 15 A Base current 4 A IBM Base peak current (tP < 1ms) 8 A Ptot Total dissipation at T c ≤ 25°C 42 W Tstg Storage temperature -40 to 150 °C 125 °C Value Unit 2.4 °C/W VGS IC ICM IB TJ Table 3. Symbol Rthj-case Gate-source voltage Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case max 3/11 Electrical characteristics 2 STC08DE150HP Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Symbol Parameter Test Conditions Min. Typ. Max. Unit ICS(SS) Collector-source =1500V V current (VBS =VGS =0V) CS(SS) 100 µA IBS(OS) Base-source current (IC =0, V GS =0V) VBS(OS) =30V 10 µA ISB(OS) Source-base current (IC =0, V GS =0V) VSB(OS) =9V 100 µA IGS(OS) Gate-source leakage (VBS =0V) VGS = ± 20V 500 nA VCS(ON) Collector-source ON voltage 1.4 V V 1.5 1 2 V V 2.2 3 V VGS =10V IC =8A IB =1.6A VGS =10V IC =5A IB =0.5A V CS =1V VGS =10V 4.5 7.5 IC =5A V CS =1V VGS =10V 8 10 DC current gain VBS(ON) Base-source ON voltage VGS =10V IC =8A IB =1.6A IC =5A IB =0.5A VGS(th) Gate threshold voltage VBS =VGS IB =250µA VCS =25V f =1MHz QGS(tot) ts tf ts tf VCSW Input capacitance Gate-source Charge INDUCTIVE LOAD Storage time Fall time 0.6 0.6 IC =8A hFE Ciss 4/11 Electrical characteristics VGS =10V 1.5 VGS=VCB=0V 750 pF 12.5 nC VGS =10V IC =8A VCS =25V VCB=0V VGS =10V RG =47Ω VClamp =1200V tp =4µs 526 ns IC =5A IB =0.5A 8.5 ns INDUCTIVE LOAD Storage time Fall time VGS =10V RG =47Ω VClamp =1200V tp =4µs 884 ns IC =5A IB =1A 16 ns Maximum collectorsource voltage switched without snubber RG =47Ω IC = 8A hFE =5 1500 V STC08DE150HP Table 4. Symbol VCS(dyn) VCS(dyn) Electrical characteristics Electrical characteristics Parameter Collector-source dynamic voltage (500ns) Collector-source dynamic voltage (1µs) Test Conditions Min. Typ. Max. Unit VCC =V Clamp =300V VGS =10V IC = 4A IB = 0.8A tpeak =500ns RG =47Ω 6 V 2.2 V IBpeak = 8A (2IC ) VCC =V Clamp =300V VGS =10V IC = 4A IB = 0.8A tpeak =500ns RG =47Ω IBpeak = 8A (2IC ) Note (1) Pulsed duration = 300 µs, duty cycle ≤1.5% 2.1 Electrical characteristics (curves) Figure 1. Output characteristics Figure 2. Dynamic collector-emitter saturation voltage Figure 3. DC current gain Figure 4. Gate threshold voltage vs temperature 5/11 Electrical characteristics 6/11 STC08DE150HP Figure 5. Collector-source On voltage Figure 6. Collector-source On voltage Figure 7. Base-source On voltage Figure 8. Base-source On voltage Figure 9. Inductive load switching time Figure 10. Inductive load switching time STC08DE150HP Electrical characteristics Figure 11. Reverse biased safe operating area 2.2 Test circuits Figure 12. Enlargement FBSOA circuit Table 5. VB1 =4.16V D1 =BA157 R1 =1Ω R2 =100Ω R3 =180Ω Rg =47Ω Components, values C1 =4700µF C2 ≤1000pF VCC =1500V Vg =10V Pulse time = 5µs 7/11 Package mechanical data 3 STC08DE150HP Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/11 STC08DE150HP Package mechanical data TO247-4LHP MECHANICAL DATA DIM. A A1 A2 A3 b b1 b2 c D D1 E e e1 L L1 L2 L3 øP S MIN. 5.50 2.85 0.95 1.10 2.50 0.40 23.85 15.45 2.54 mm. TYP 5.65 3.15 1.92 3.18 1.10 24 21.50 15.60 MAX. 5.80 3.25 1.30 1.50 2.90 0.80 24.15 15.75 5.08 10.20 2.20 2.50 18.50 3 3.55 10.80 2.80 3.65 5.50 7908765A 9/11 Revision history 4 STC08DE150HP Revision history Table 6. 10/11 Revision history Date Revision 26-Oct-2006 1 Changes First release. STC08DE150HP Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11