STMICROELECTRONICS STGD10NC60KT4

STGB10NC60K - STGD10NC60K
STGP10NC60K
N-channel 600V - 10A - D2PAK / TO-220 / DPAK
Short circuit rated PowerMESH™ IGBT
General features
Type
VCES
VCE(sat)Max
@25°C
IC
@100°C
STGB10NC60K
STGP10NC60K
STGD10NC60K
600V
600V
600v
<2.5V
<2.5V
<2.5V
10A
10A
10A
3
1
3
1
2
D²PAK
TO-220
■
Lower on voltage drop (Vcesat)
■
Lower CRES / CIES ratio (no cross-conduction
susceptibility)
■
Very soft ultra fast recovery antiparallel diode
■
Short circuit withstand time 10µs
Description
3
1
DPAK
Internal schematic diagram
Using the latest high voltage technology based on
a patented strip layout, STMicroelectronics has
designed an advanced family of IGBTs, the
PowerMESH™ IGBTs, with outstanding
performances. The suffix “K” identifies a family
optimized for high frequency motor control
applications with short circuit withstand capability.
Applications
■
High frequency motor controls
■
SMPS and PFC in both hard switch and
resonant topologies
■
Motor drivers
Order codes
Part number
Marking
Package
Packaging
STGB10NC60KT4
GB10NC60K
D²PAK
Tape & reel
STGP10NC60K
GP10NC60K
TO-220
Tube
STGD10NC60KT4
GD10NC60K
DPAK
Tape & reel
February 2007
Rev 5
1/17
www.st.com
17
Contents
STGB10NC60K - STGP10NC60K - STGD10NC60K
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................. 6
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
................................................ 9
STGB10NC60K - STGP10NC60K - STGD10NC60K
1
Electrical ratings
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
VCES
Collector-emitter voltage (VGS = 0)
600
V
IC(1)
Collector current (continuous) at TC = 25°C
20
A
IC(1)
Collector current (continuous) at TC = 100°C
10
A
Collector current (pulsed)
30
A
VGE
Gate-emitter voltage
±20
V
PTOT
Total dissipation at TC = 25°C
60
W
Tstg
Storage temperature
– 55 to 150
°C
Short circuit withstand time
10
µs
Maximum lead temperature for soldering purpose
(for 10sec. 1.6 mm from case)
300
°C
Value
Unit
ICM(2)
Tj
Tscw
Tl
Operating junction temperature
1. Calculated according to the iterative formula:
T
–T
JMAX
C
I ( T ) = ----------------------------------------------------------------------------------------------------C C
R
× V
(T , I )
THJ – C
CESAT ( MAX ) C C
2. Pulse width limited by max junction temperature
Table 2.
Symbol
Thermal resistance
Parameter
Rthj-case
Thermal resistance junction-case Max
2.08
°C/W
Rthj-amb
Thermal resistance junction-ambient Max
62.5
°C/W
3/17
Electrical characteristics
2
STGB10NC60K - STGP10NC60K - STGD10NC60K
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3.
Symbol
Parameter
VBR(CES)
Collector-emitter
breakdown voltage
VCE(sat)
Collector-emitter saturation VGE= 15V, IC= 5A
voltage
VGE= 15V, IC= 5A, Tc= 125°C
VGE(th)
Gate threshold voltage
VCE= VGE, IC= 250 µA
ICES
Collector cut-off current
(VGE = 0)
VCE= Max Rating,TC= 25°C
IGES
gfs
Table 4.
Symbol
Cies
Coes
Cres
Qg
Qge
Qgc
4/17
Static
Test conditions
IC= 1mA, VGE= 0
Min.
Typ.
Max.
600
Unit
V
2.2
1.8
2.5
V
V
6.5
V
VCE=Max Rating,TC= 125°C
150
1
µA
mA
Gate-emitter leakage
current (VCE = 0)
VGE= ±20V, VCE= 0
±100
nA
Forward transconductance
VCE = 15V, IC= 5A
4.5
15
S
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer
capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Test conditions
VCE = 25V, f = 1MHz,
VGE = 0
VCE = 390V, IC = 5A,
VGE = 15V,
(see Figure 16)
Min.
Typ.
Max.
Unit
380
46
8.5
pF
pF
pF
19
5
9
nC
nC
nC
STGB10NC60K - STGP10NC60K - STGD10NC60K
Table 5.
Symbol
Switching on/off (inductive load)
Parameter
td(on)
Turn-on delay time
tr
Current rise time
(di/dt)on Turn-on current slope
td(on)
Turn-on delay time
tr
Current rise time
(di/dt)on Turn-on current slope
tr(Voff)
td(off)
tf
tr(Voff)
td(off)
tf
Table 6.
Symbol
Eon(1)
Eoff(2)
Ets
Eon(1)
Eoff(2)
Ets
Electrical characteristics
Test conditions
Min.
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V, Tj= 25°C
(see Figure 17)
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V, Tj=125°C
(see Figure 17)
Off voltage rise time
Turn-off delay time
Current fall time
Vcc = 390V, IC = 5A,
Off voltage rise time
Turn-off delay time
Current fall time
Vcc = 390V, IC = 5A,
RGE = 10Ω, VGE = 15V,TJ=25°C
(see Figure 17)
RGE=10Ω, VGE =15V, Tj=125°C
(see Figure 17)
Typ.
Max. Unit
17
6
655
ns
ns
A/µs
16.5
6.5
575
ns
ns
A/µs
33
72
82
ns
ns
ns
60
106
136
ns
ns
ns
Switching energy (inductive load)
Parameter
Turn-on switching losses
Turn-off switching losses
Total switching losses
Turn-on switching losses
Turn-off switching losses
Total switching losses
Test conditions
VCC = 390V, IC = 5A
RG= 10Ω, VGE=15V, Tj=25°C
(see Figure 17)
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V,
Tj= 125°C
(see Figure 17)
Min
Typ
Max
Unit
55
85
140
µJ
µJ
µJ
87
162
249
µJ
µJ
µJ
1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a
package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same
temperature (25°C and 125°C)
2. Turn-off losses include also the tail of the collector current
5/17
Electrical characteristics
STGB10NC60K - STGP10NC60K - STGD10NC60K
2.1
Electrical characteristics (curves)
Figure 1.
Output characteristics
Figure 2.
Transfer characteristics
Figure 3.
Transconductance
Figure 4.
Collector-emitter on voltage vs
temperature
Figure 5.
Gate charge vs gate-source voltage Figure 6.
6/17
Capacitance variations
STGB10NC60K - STGP10NC60K - STGD10NC60K
Electrical characteristics
Figure 7.
Normalized gate threshold voltage
vs temperature
Figure 8.
Collector-emitter on voltage vs
collector current
Figure 9.
Normalized breakdown voltage vs
temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector
current
7/17
Electrical characteristics
Figure 13. Thermal impedance
8/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Figure 14. Turn-off SOA
STGB10NC60K - STGP10NC60K - STGD10NC60K
3
Test circuit
Test circuit
Figure 15. Test circuit for inductive load
switching
Figure 16. Gate charge test circuit
Figure 17. Switching waveform
Figure 18. Diode recovery time waveform
9/17
Package mechanical data
4
STGB10NC60K - STGP10NC60K - STGD10NC60K
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Package mechanical data
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
0.551
L
13
14
0.511
L1
3.50
3.93
0.137
L20
16.40
L30
0.154
0.645
28.90
1.137
øP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
11/17
Package mechanical data
STGB10NC60K - STGP10NC60K - STGD10NC60K
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
10.4
0.393
D1
E
8
10
E1
0.315
8.5
0.334
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
R
0º
0.126
0.015
4º
3
V2
0.4
1
12/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Package mechanical data
DPAK MECHANICAL DATA
mm.
inch
DIM.
MAX.
MIN.
A
A1
A2
B
b4
MIN.
2.2
0.9
0.03
0.64
5.2
2.4
1.1
0.23
0.9
5.4
0.086
0.035
0.001
0.025
0.204
0.094
0.043
0.009
0.035
0.212
C
C2
D
D1
E
E1
0.45
0.48
6
0.6
0.6
6.2
0.017
0.019
0.236
0.023
0.023
0.244
6.6
0.252
e
e1
H
L
(L1)
L2
L4
R
V2
TYP
5.1
6.4
0.090
4.6
10.1
0.173
0.368
0.039
2.8
0.8
0.181
0.397
0.110
0.031
1
0.023
0.2
0°
0.260
0.185
2.28
0.6
MAX.
0.200
4.7
4.4
9.35
1
TYP.
0.039
0.008
8°
0°
8°
0068772-F
13/17
Packaging mechanical data
5
STGB10NC60K - STGP10NC60K - STGD10NC60K
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
* on sales type
14/17
inch
0.933 0.956
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
STGB10NC60K - STGP10NC60K - STGD10NC60K
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
16.4
N
50
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
A0
6.8
7
0.267 0.275
B0
10.4
10.6
0.409 0.417
B1
D
1.5
D1
1.5
E
1.65
MIN.
12.1
0.476
1.6
0.059 0.063
1.85
0.065 0.073
7.4
7.6
0.291 0.299
2.55
2.75
0.100 0.108
0.153 0.161
P0
3.9
4.1
P1
7.9
8.1
0.311 0.319
P2
1.9
2.1
0.075 0.082
40
15.7
MAX.
330
12.992
13.2
0.504 0.520
18.4
0.645 0.724
0.059
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
0.059
F
R
MIN.
MAX.
K0
W
inch
MAX.
1.574
16.3
0.618
0.641
15/17
Revision history
6
STGB10NC60K - STGP10NC60K - STGD10NC60K
Revision history
Table 7.
16/17
Revision history
Date
Revision
Changes
21-Nov-2005
1
New release
06-Dic-2005
2
Inserted row on Table 1.: Absolute maximum ratings
06-Mar-2006
3
The document has been reformatted
06-Jun-2006
4
Inserted DPAK
08-Feb-2007
5
Description has been updated
STGB10NC60K - STGP10NC60K - STGD10NC60K
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17