STP190NF04 STB190NF04 - STB190NF04-1 N-channel 40V - 0.0039Ω - 120A - D2PAK/I2PAK/TO-220 STripFET™ III Power MOSFET General features Type VDSS RDS(on) ID STP190NF04 40V <0.0043Ω 120A STB190NF04 40V <0.0043Ω 120A STB190NF04-1 40V <0.0043Ω 120A ■ Standard threshold drive ■ 100% avalanche tested 3 1 3 1 2 D2PAK TO-220 3 12 Description I2PAK This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications ■ Switching application Order codes Part number STB190NF04T4 Marking B190NF04 STB190NF04-1 B190NF04 STP190NF04 P190NF04 August 2006 Package Tape & reel 2PAK Tube TO-220 Tube D I Rev 2 Packaging 2PAK 1/16 www.st.com 16 Contents STP190NF04 - STB190NF04 - STB190NF04-1 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 ................................................ 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 STP190NF04 - STB190NF04 - STB190NF04-1 1 Electrical ratings Electrical ratings Table 1. Symbol VDS VDGR Absolute maximum ratings Parameter Value Unit Drain-source voltage (VGS = 0) 40 V Drain-gate voltage (RGS = 20 kΩ) 40 V VGS Gate- source voltage ± 20 V ID(1) Drain current (continuous) at TC = 25°C 120 A ID(1) Drain current (continuous) at TC = 100°C 120 A Drain current (pulsed) 480 A Total dissipation at TC = 25°C 310 W Derating factor 2.07 W/°C 7 V/ns 860 mJ -55 to 175 °C IDM(2) Ptot dv/dt(3) Peak diode recovery voltage slope EAS (4) Single pulse avalanche energy Tstg Tj Storage temperature Max. operating junction temperature 1. Value limited by package 2. Pulse width limited by safe operating area. 3. ISD ≤190A, di/dt ≤600A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX 4. Starting Tj = 25 °C, ID = 95A, VDD = 35V Table 2. Thermal data Rthj-case Thermal resistance junction-case max Rthj-amb TJ 0.48 °C/W Thermal resistance junction-ambient max 50 °C/W Maximum lead temperature for soldering purpose(1) 300 °C 1. for 10 sec. 1.6mm from case 3/16 Electrical characteristics 2 STP190NF04 - STB190NF04 - STB190NF04-1 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250µA, VGS =0 IDSS Zero gate voltage drain current (VGS = 0) VDS = max ratings VDS = max ratings, TC = 125°C IGSS Gate-body leakage current (VDS = 0) VGS = ± 20V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 95A Table 4. Symbol Test conditions Typ. Max. 40 Unit V 1 10 µA µA ±100 nA 4 V 0.0039 0.0043 Ω Typ. Max. Unit 2 Dynamic Parameter Test conditions Min. gfs (1) Forward transconductance VDS= 15V , ID = 95A 200 S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1MHz, VGS = 0 5800 1500 200 pF pF pF td(on) tr td(off) tf Turn-on delay time Rise time Turn-off delay time Fall time VDD = 20V, ID = 95A RG = 4.7Ω VGS = 10V (see Figure 15) 45 380 100 75 ns ns ns ns Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 20V, ID = 190A, VGS = 5V (see Figure 16) 130 40 45 nC nC nC 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 4/16 Min. STP190NF04 - STB190NF04 - STB190NF04-1 Table 5. Symbol Source drain diode Parameter ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD trr Qrr IRRM Electrical characteristics Test conditions Min. Typ. ISD = 120A, VGS = 0 ISD = 190A, Reverse recovery time di/dt = 100A/µs, Reverse recovery charge VDD = 34V, Tj = 150°C Reverse recovery current (see Figure 17) 90 295 6.5 Max. Unit 120 480 A A 1.3 V ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/16 Electrical characteristics STP190NF04 - STB190NF04 - STB190NF04-1 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/16 STP190NF04 - STB190NF04 - STB190NF04-1 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Normalized BVDSS vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics 7/16 Electrical characteristics Figure 13. Thermal resistance rthj-a vs PCB copper area 8/16 STP190NF04 - STB190NF04 - STB190NF04-1 Figure 14. Max power dissipation vs PCB copper area STP190NF04 - STB190NF04 - STB190NF04-1 3 Test circuit Test circuit Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/16 Package mechanical data 4 STP190NF04 - STB190NF04 - STB190NF04-1 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/16 STP190NF04 - STB190NF04 - STB190NF04-1 Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8 10 E1 0.368 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0º 0.015 4º 3 V2 0.4 1 11/16 Package mechanical data STP190NF04 - STB190NF04 - STB190NF04-1 TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. 12/16 MAX. MIN. A 4.40 TYP 4.60 0.173 TYP. 0.181 MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 STP190NF04 - STB190NF04 - STB190NF04-1 Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 13/16 Packaging mechanical data 5 STP190NF04 - STB190NF04 - STB190NF04-1 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 14/16 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STP190NF04 - STB190NF04 - STB190NF04-1 6 Revision history Revision history Table 6. Revision history Date Revision Changes 09-Sep-2004 1 First version 09-Aug-2006 2 New template, no content change 15/16 STP190NF04 - STB190NF04 - STB190NF04-1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16