STMICROELECTRONICS STP141NF55

STB141NF55 - STB141NF55-1
STP141NF55
N-channel 55V - 0.0065Ω - 80A - D2PAK - I2PAK - TO-220
STripFET™ II Power MOSFET
Features
Type
VDSS
RDS(on)
ID (1)
STB141NF55
55V
<0.008Ω
80A
STB141NF55-1
55V
<0.008Ω
80A
STP141NF55
55V
<0.008Ω
80A
3
1. Current limited by package
1
2
TO-220
Description
This Power MOSFET is the latest development of
STMicroelectronics unique “Single Feature Size”
strip-based process. The resulting transistor
shows extremely high packing density for low onresistance, rugged avalance characteristics and
less critical alignment steps therefore a
remarkable manufacturing reproducibility.
Figure 1.
3
3
12
1
D²PAK
I²PAK
Internal schematic diagram
Applications
■
Motor control
■
High current, switching application
■
Automotive environment
Table 1.
Device summary
Order code
Marking
Package
Packaging
STB141NF55
B141NF55
D²PAK
Tape & reel
STB141NF55-1
B141NF55
I²PAK
Tube
STP141NF55
P141NF55
TO-220
Tube
August 2007
Rev 1
1/15
www.st.com
Contents
STB141NF55 - STB141NF55-1 - STP141NF55
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................. 6
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/15
................................................ 8
STB141NF55 - STB141NF55-1 - STP141NF55
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDS
Drain-source voltage (VGS = 0)
55
V
VGS
Gate- source voltage
±20
V
Drain current (continuous) at TC = 25°C
80
A
Drain current (continuous) at TC = 100°C
80
A
Drain current (pulsed)
320
A
Total dissipation at TC = 25°C
300
W
Derating factor
2
W/°C
Peak diode recovery voltage slope
10
V/ns
Single pulse avalance energy
1.3
J
–55 to 175
°C
ID
(1)
ID (1)
IDM
(2)
PTOT
dv/dt (3)
EAS
(4)
Tstg
Tj
Storage temperature
Operating junction temperature
1. Current limited by package
2. Pulse width limited by safe operating area
3. ISD < 80A, di/dt < 300A/µs, VDD=80%V(BR)DSS
4. Starting Tj = 25°C, ID = 40A, VDD = 30V
Table 2.
Thermal data
Value
Symbol
Parameter
Unit
TO-220 - I²PAK
Rthj-case
Thermal resistance junction-case max
Rthj-amb
Thermal resistance junction-ambient max
Rthj-pcb (1) Thermal resistance junction-pcb max
Tl
Maximum lead temperature for soldering
purpose (for 10 sec, 1.6mm from case)
D²PAK
0.5
°C/W
62.5
--
°C/W
--
35
°C/W
300
°C
1. When mounted on 1 inch², FR4 board, 2 oz Cu
3/15
Electrical characteristics
2
STB141NF55 - STB141NF55-1 - STP141NF55
Electrical characteristics
(TCASE = 25°C unless otherwise specified)
Table 3.
On/off states
Symbol
Parameter
V(BR)DSS
Drain-source
breakdown voltage
ID = 250 µA, VGS = 0
IDSS
Zero gate voltage
drain current (VGS = 0)
VDS = Max rating
VDS = Max rating, TC = 125 °C
IGSS
Gate-body leakage
current (VDS = 0)
VGS = ±20V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250µA
RDS(on)
Static drain-source on
resistance
VGS = 10 V, ID = 40 A
Table 4.
Test conditions
Typ.
Max. Unit
55
2
V
3
1
10
µA
µA
±100
nA
4
V
0.0065 0.008
Ω
Dynamic
Symbol
Parameter
Test conditions
gfs (1)
Forward transconductance
VDS = 15V, ID= 40 A
100
S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS = 25V, f = 1 MHz
VGS = 0
5300
1000
290
pF
pF
pF
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 44V, ID= 80A
VGS =10V
(see Figure 14)
142
27
55
nC
nC
nC
1. Pulsed: pulse duration = 300µs, duty cycle 1.5%
4/15
Min.
Min.
Typ.
Max. Unit
STB141NF55 - STB141NF55-1 - STP141NF55
Table 5.
Symbol
Electrical characteristics
Switching times
Parameter
Test conditions
Min.
Typ.
Max. Unit
td(on)
tr
Turn-on delay time
Rise time
VDD = 27.5 V, ID = 40A
RG = 4.7Ω , VGS = 10V
(see Figure 13)
30
150
ns
ns
td(off)
tf
Turn-off-delay time
Fall time
VDD = 27.5V, ID = 40A,
RG = 4.7Ω, VGS = 10V
(see Figure 13)
125
45
ns
ns
Table 6.
Source drain diode
Symbol
Parameter
ISD
ISDM (1)
Source-drain current
Source-drain current (pulsed)
VSD (2)
Forward on voltage
ISD = 80A, VGS = 0
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 80A, di/dt = 100 A/µs,
VDD = 20V, Tj = 150°C
(see Figure 15)
trr
Qrr
IRRM
Test conditions
Min.
Typ.
90
275
6.5
Max.
Unit
80
320
A
A
1.5
V
ns
nC
A
1. Pulse width limited safe operating area
2. Pulsed: pulse duration = 300µs, duty cycle 1.5%
5/15
Electrical characteristics
STB141NF55 - STB141NF55-1 - STP141NF55
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area
Figure 2.
Thermal impedance
Figure 3.
Output characteristics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/15
STB141NF55 - STB141NF55-1 - STP141NF55
Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Figure 9.
Normalized gate threshold voltage
vs temperature
Figure 11. Source-drain diode forward
characteristics
Capacitance variations
Figure 10. Normalized on resistance vs
temperature
Figure 12. Normalized BVDSS vs temperature
7/15
Test circuit
3
STB141NF55 - STB141NF55-1 - STP141NF55
Test circuit
Figure 13. Switching times test circuit for
resistive load
Figure 14. Gate charge test circuit
Figure 15. Test circuit for inductive load
Figure 16. Unclamped inductive load test
switching and diode recovery times
circuit
Figure 17. Unclamped inductive waveform
8/15
Figure 18. Switching time waveform
STB141NF55 - STB141NF55-1 - STP141NF55
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/15
Package mechanical data
STB141NF55 - STB141NF55-1 - STP141NF55
TO-220 mechanical data
mm
inch
Dim
Min
A
b
b1
c
D
D1
E
e
e1
F
H1
J1
L
L1
L20
L30
θP
Q
10/15
Typ
4.40
0.61
1.14
0.49
15.25
Max
Min
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
1.27
10
2.40
4.95
1.23
6.20
2.40
13
3.50
Max
0.181
0.034
0.066
0.027
0.62
0.050
16.40
28.90
3.75
2.65
Typ
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.645
1.137
3.85
2.95
0.147
0.104
0.151
0.116
STB141NF55 - STB141NF55-1 - STP141NF55
Package mechanical data
TO-262 (I2PAK) MECHANICAL DATA
mm.
inch
DIM.
MAX.
MIN.
A
4.40
MIN.
TYP
4.60
0.173
TYP.
MAX.
A1
2.40
2.72
0.094
0.107
b
0.61
0.88
0.024
0.034
b1
1.14
1.70
0.044
0.066
c
0.49
0.70
0.019
0.027
0.181
c2
1.23
1.32
0.048
0.052
D
8.95
9.35
0.352
0.368
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
E
10
10.40
0.393
0.410
L
13
14
0.511
0.551
L1
3.50
3.93
0.137
0.154
L2
1.27
1.40
0.050
0.055
11/15
Package mechanical data
STB141NF55 - STB141NF55-1 - STP141NF55
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MAX.
MIN.
A
MIN.
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
D1
E
TYP
8
10
E1
TYP.
MAX.
0.315
10.4
0.393
8.5
0.334
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
0.126
R
0º
0.015
4º
3
V2
0.4
1
12/15
STB141NF55 - STB141NF55-1 - STP141NF55
5
Packaging mechanical data
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
13/15
Revision history
6
STB141NF55 - STB141NF55-1 - STP141NF55
Revision history
Table 7.
14/15
Document revision history
Date
Revision
01-Aug-2007
1
Changes
Initial release.
STB141NF55 - STB141NF55-1 - STP141NF55
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
15/15