STB20NF06L - STF20NF06L STP20NF06L N-channel 60V - 0.06Ω - 20A - D2PAK/TO-220/TO-220FP STripFET™ II Power MOSFET General features Type VDSS RDS(on) ID STB20NF06L 60V <0.07Ω 20A STF20NF06L 60V <0.07Ω 20A (1) STP20NF06L 60V <0.07Ω 3 3 1 20A 2 1 2 TO-220 TO-220FP 1. Refer to SOA for the max allowable current value on FP-type due to Rth value ■ Avalanche rugged technology ■ 100% avalanche tested ■ 175°C operating temperature ■ High dv/dt capability ■ application oriented characterization 3 1 D²PAK Internal schematic diagram Description This Power MOSFET is the latest development of STMicroelectronics unique “single feature size”™ strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Applications ■ Switching application Order codes Part number Marking Package Packaging STB20NF06LT4 B20NF06L D²PAK Tape & reel STF20NF06L F20NF06L TO-220FP Tube STP20NF06L P20NF06L TO-220 Tube July 2006 Rev 2 1/16 www.st.com 16 Contents STB20NF06L - STF20NF06L - STP20NF06L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 ................................................ 9 STB20NF06L - STF20NF06L - STP20NF06L 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit TO-220/D²PAK VDS Drain-source voltage (VGS = 0) VGS Gate- source voltage Drain current (continuous) at TC = 25°C ID ID IDM Drain current (continuous) at TC = 100°C (2) Ptot (3) dv/dt EAS (4) Tstg Tj TO-220FP 60 V ± 18 V 20 20 (1) A 14 14 (1) A 80 (1) A Drain current (pulsed) 80 Total dissipation at TC = 25°C 60 28 W Derating Factor 0.4 0.18 W/°C Peak diode recovery voltage slope 9 V/ns 120 mJ -55 to 175 °C Single pulse avalanche energy Storage temperature Max. operating junction temperature 1. Refer to SOA for the max allowable current value on FP-type due to Rth value 2. Pulse width limited by safe operating area. 3. ISD ≤20A, di/dt ≤200A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX 4. Starting Tj = 25 °C, ID = 10A, VDD = 30V Table 2. Symbol Thermal data Parameter Rthj-case Thermal resistance junction-case max TO-220/D²PAK TO-220FP Unit 2.5 5.35 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W Tl Maximum lead temperature for soldering purpose (for 10sec. 1.6mm from case) 300 °C/W 3/16 Electrical characteristics 2 STB20NF06L - STF20NF06L - STP20NF06L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250µA, VGS =0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS = Max rating,@125°C IGSS Gate-body leakage current (VDS = 0) VGS = ± 18V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 10A VGS = 5V, ID = 10A Table 4. Symbol Test conditions Typ. Max. 60 2 Unit V 1 10 µA µA ±100 nA 3 4 V 0.060 0.075 0.070 0.085 Ω Ω Typ. Max. Unit Dynamic Parameter Test conditions Min. gfs (1) Forward transconductance VDS= 15V, ID = 8A 10 S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1MHz, VGS = 0 400 100 40 pF pF pF Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 30V, ID = 20A, VGS = 10V (see Figure 16) 7.5 2.5 4.2 nC nC nC 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 4/16 Min. STB20NF06L - STF20NF06L - STP20NF06L Table 5. Symbol td(on) tr td(off) tf Table 6. Symbol Switching times Parameter Test conditions Turn-on delay time Rise time Turn-off delay time Fall time VDD = 30V, ID = 10A RG = 4.7Ω VGS = 10V (see Figure 15) Parameter ISDM (1) VSD (2) Forward on voltage trr Qrr IRRM Min. Typ. Max. 12 30 20 6 Unit ns ns ns ns Source drain diode Source-drain current Source-drain current (pulsed) ISD Electrical characteristics Test conditions Min. Typ. ISD = 20A, VGS = 0 Reverse recovery time ISD = 20A, di/dt = 100A/µs, Reverse recovery charge VDD = 20V, Tj = 150°C Reverse recovery current (see Figure 17) 50 65 3 Max. Unit 20 80 A A 1.5 V ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/16 Electrical characteristics STB20NF06L - STF20NF06L - STP20NF06L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220/ D²PAK Figure 2. Thermal impedance for TO-220/ D²PAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics 6/16 STB20NF06L - STF20NF06L - STP20NF06L Electrical characteristics Figure 7. Transconductance Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 8. Static drain-source on resistance Figure 12. Normalized on resistance vs temperature 7/16 Electrical characteristics Figure 13. Source-drain diode forward characteristics 8/16 STB20NF06L - STF20NF06L - STP20NF06L Figure 14. Normalized breakdown voltage temperature STB20NF06L - STF20NF06L - STP20NF06L 3 Test circuit Test circuit Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/16 Package mechanical data 4 STB20NF06L - STF20NF06L - STP20NF06L Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com 10/16 STB20NF06L - STF20NF06L - STP20NF06L Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/16 Package mechanical data STB20NF06L - STF20NF06L - STP20NF06L TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 12/16 L5 1 2 3 L4 STB20NF06L - STF20NF06L - STP20NF06L Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0º 0.126 0.015 4º 3 V2 0.4 1 13/16 Packing mechanical data 5 STB20NF06L - STF20NF06L - STP20NF06L Packing mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 14/16 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB20NF06L - STF20NF06L - STP20NF06L 6 Revision history Revision history Table 7. Revision history Date Revision Changes 09-Dec-2004 1 First release 27-Jul-2006 2 New template, inserted D²PAK 15/16 STB20NF06L - STF20NF06L - STP20NF06L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16