TN1515-600B 15 A standard SCR Table 1. Main features Symbol Value Unit IT(RMS) 15 A VDRM/VRRM 600 V IGT (Q1) 15 mA A G K Description A Specifically designed to control motor in hand tools application, the TN15 SCR is available in DPAK package, providing a high robustness against stalled rotor operating conditions in a small SMD package Table 2. DPAK TN1515 Marking TN1515-600B-TR TN15 15600 TN1515-600B TN15 15600 Absolute maximum ratings Symbol IT(RMS) K Order code Part number Table 3. G A Parameter Value Unit RMS on-state current (180° conduction angle) Tc = 109° C 15 A IT(AV) Average on-state current (180° conduction angle) Tc = 109° C 9.5 A ITSM Non repetitive surge peak on-state current I ²t tp = 8.3 ms tp = 10 ms I²t Value for fusing tp = 10 ms dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns IGM Peak gate current PG(AV) 165 Tj = 25° C A 150 Tj = 25° C 113 A²s F = 120 Hz Tj = 125° C 50 A/µs tp = 20 µs Tj = 125° C 4 A Tj = 125° C 1 W Average gate power dissipation Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C VRGM Maximum peak reverse gate voltage 5 V July 2007 Rev 2 1/7 www.st.com 7 Characteristics TN1515-600B 1 Characteristics Table 4. Electrical characteristics (Tj = 25° C, unless otherwise specified) Symbol Test conditions IGT Vout = 12 V, RL = 33 Ω VGT Vout = 12 V, RL = 33 Ω VGD Vout = VDRM, RL = 33 Ω Values Tj = 25° C Unit MIN. 2 MAX. 15 MAX. 1.3 V MIN. 0.2 V mA Tj = 125° C IH IT = 500 mA MAX. 40 mA IL IG = 1.2 IGT MAX. 60 mA dV/dt VD = 67% VDRM, gate open Tj = 125° C MIN. 200 V/µs VTM ITM = 30 A, tp = 380 µs Tj = 25° C MAX. 1.6 V VTO Threshold voltage Tj = 125° C MAX. 0.85 V RD Dynamic resistance Tj = 125° C MAX. 25 mΩ 5 µA 2 mA IDRM Tj = 25° C VDRM = VRRM IRRM Table 5. MAX. Tj = 125° C Thermal resistance Symbol Parameter Rth(j-c) Junction to case (DC) Rth(j-a) Junction to ambient Figure 1. S = 0.5 cm2 Maximum power dissipation versus average on-state current Figure 2. P(W) Value Unit 1.2 °C/W 70 °C/W Average and DC on-state current versus case temperature IT(AV) (A) 14 16 α=180° 12 14 10 12 8 10 D.C. α=180° 8 6 6 4 4 360° 2 2 I T(AV) (A) 0 0 2/7 TC (°C) 0 1 2 3 4 5 6 7 8 9 10 0 25 50 75 100 125 TN1515-600B Figure 3. Characteristics Figure 4. Average and DC on-state current versus ambient temperature, PCB FR4, copper thickness 35 µm Thermal impedance, junction to ambient, versus pulse duration, PCB FR4, copper thickness 35 µm Zth( j-a) (°C/W) IT(AV) (A) 100 2.5 SCU= 0.5 cm² SCU=0.5cm² α=180° 2.0 1.5 D.C. 10 1.0 0.5 T amb (°C) 0.0 0 25 Figure 5. 50 75 100 125 Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) 1 1.E-03 1.E-02 Figure 6. 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 Surge peak on-state current versus number of cycles ITSM (A) IGT, IH, IL [T j] / IGT, IH, IL [T j=25°C] 2.4 180 2.2 160 2.0 IGT 1.8 140 1.6 tp=10ms Non repetitive Tj initial=25°C One cycle 120 1.4 1.2 t P (s) 100 I H & IL 1.0 80 0.8 60 0.6 Repetitive TC=109°C 40 0.4 20 Tj(°C) 0.2 0.0 Number of cycles 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110120130 Figure 7. Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t 1 10 Figure 8. 100 1000 On-state characteristics (maximum values) ITM (A) ITSM(A), I²t (A²s) 100.0 1.E+04 Tj initial=25°C dI/dt limitation 10.0 Tj=125°C Tj=25°C 1.E+03 ITSM 1.0 1.E+02 0.01 I²t t P(ms) 0.10 1.00 Tj max. : Vto = 0.85 V RD = 25 mΩ VTM (V) 10.00 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 3/7 Ordering information scheme Figure 9. TN1515-600B Junction to ambient thermal resistance versus copper surface under tab, PCB FR4, copper thickness 35µm Rth(j-a) (°C/W) 100 80 60 40 20 SCU (cm²) 0 0 2 5 10 15 20 25 30 35 40 Ordering information scheme Figure 10. Ordering information scheme TN 15 15 - 600 SCR series RMS Current 15 = 15 A Sensitivity 15 = 15 mA Voltage 600 = 600 V Package B = DPAK Packing mode Blank = Tube -TR = Tape and reel 4/7 B (-TR) TN1515-600B 3 Package information Package information ● Epoxy meets UL94, V0 Table 6. DPAK dimensions DIMENSIONS REF. E A B2 C2 Millimeters Inches Min. Max Min. Max. A 2.20 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.212 C 0.45 0.60 0.017 0.023 C2 0.48 0.60 0.018 0.023 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.251 0.259 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.397 L2 D R H L4 A1 B G R C A2 0.60 MIN. V2 L2 0.80 typ. 0.031 typ. L4 0.60 1.00 0.023 0.039 V2 0° 8° 0° 8° Figure 11. DPAK footprint (dimensions in mm) 6.7 3 3 1.6 2.3 6.7 2.3 1.6 In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 5/7 Ordering information 4 Ordering information Table 7. 5 Ordering information Part number Marking Package Weight Base qty Delivery mode TN1515-600B-TR TN15 15600 DPAK 0.3 g 2500 Tape and reel TN1515-600B TN15 15600 DPAK 0.3 g 75 Tube Revision history Table 8. 6/7 TN1515-600B Revision history Date Revision Changes 13-Mar-2006 1 Initial release. 11-Jul-2007 2 Added pin out labels to package illustration on cover page. TN1515-600B Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7