SN54HC153, SN74HC153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS112B – DECEMBER 1982 – REVISED MAY 1997 D D D D Permit Multiplexing from n Lines to One Line Perform Parallel-to-Serial Conversion Strobe (Enable) Line Provided for Cascading (N Lines to n Lines) Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs SN54HC153 . . . J OR W PACKAGE SN74HC153 . . . D, N, OR PW PACKAGE (TOP VIEW) 1G B 1C3 1C2 1C1 1C0 1Y GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 2G A 2C3 2C2 2C1 2C0 2Y description SN54HC153 . . . FK PACKAGE (TOP VIEW) B 1G NC VCC 2G Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate strobe (G) inputs are provided for each of the two 4-line sections. 1C3 1C2 NC 1C1 1C0 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 A 2C3 NC 2C2 2C1 1Y GND NC 2Y 2C0 The SN54HC153 is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74HC153 is characterized for operation from –40°C to 85°C. 4 NC – No internal connection FUNCTION TABLE INPUTS SELECT† DATA C3 G OUTPUT Y B A C0 C1 C2 X X X X X X H L L L L X X X L L L L H X X X L H L H X L X X L L H L H X H X X L H L X X L X L L H L X X H X L H H H X X X L L L H H X X X H L H † Select inputs A and B are common to both sections. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1997, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54HC153, SN74HC153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS112B – DECEMBER 1982 – REVISED MAY 1997 logic symbol† A B 1G 1C0 1C1 1C2 1C3 2G 2C0 2C1 2C2 2C3 14 2 0 1 1 6 5 4 3 EN G 0 3 MUX 0 7 1 2 3 15 10 9 11 12 13 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, N, PW, and W packages. 2 1Y POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2Y SN54HC153, SN74HC153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS112B – DECEMBER 1982 – REVISED MAY 1997 logic diagram (positive logic) A B 1G 1C0 14 2 1 6 TG TG 1C1 5 TG 7 1C2 4 1Y TG TG 1C3 2G 2C0 3 TG 15 10 TG TG 2C1 11 TG 9 2C2 12 2Y TG TG 2C3 13 TG Pin numbers shown are for the D, J, N, PW, and W packages. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54HC153, SN74HC153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS112B – DECEMBER 1982 – REVISED MAY 1997 absolute maximum ratings over operating free-air temperature range† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±35 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±70 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace length of zero. recommended operating conditions SN54HC153 VCC Supply voltage VIH High-level input voltage VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 2 V VIL Low-level input voltage VI VO Input voltage Output voltage tt Input transition (rise and fall) time TA 4 SN74HC153 MIN NOM MAX MIN NOM MAX 2 5 6 2 5 6 1.5 1.5 3.15 3.15 4.2 4.2 0.5 0 0.5 0 1.35 0 1.35 0 1.8 0 1.8 0 0 0 VCC VCC 0 VCC VCC VCC = 2 V VCC = 4.5 V 0 1000 0 1000 0 500 0 500 VCC = 6 V 0 400 0 400 –55 125 –40 85 Operating free-air temperature POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V V 0 VCC = 4.5 V VCC = 6 V UNIT V V V ns °C SN54HC153, SN74HC153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS112B – DECEMBER 1982 – REVISED MAY 1997 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = –20 µA VOH VI = VIH or VIL IOH = –6 mA IOH = –7.8 mA IOL = 20 µA VOL VI = VIH or VIL IOL = 6 mA IOL = 7.8 mA II ICC VI = VCC or 0 VI = VCC or 0, IO = 0 MIN TA = 25°C TYP MAX MIN MAX SN74HC153 MIN 2V 1.9 1.998 1.9 1.9 4.5 V 4.4 4.499 4.4 4.4 6V 5.9 5.999 5.9 5.9 4.5 V 3.98 4.3 3.7 3.84 6V 5.48 5.8 5.2 MAX UNIT V 5.34 2V 0.002 0.1 0.1 0.1 4.5 V 0.001 0.1 0.1 0.1 6V 0.001 0.1 0.1 0.1 4.5 V 0.17 0.26 0.4 0.33 6V 0.15 0.26 0.4 0.33 6V ±0.1 ±100 ±1000 ±1000 nA 8 160 80 µA 3 10 10 10 pF 6V Ci SN54HC153 2 V to 6 V V switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tpd SN54HC153 SN74HC153 TO (OUTPUT) VCC 2V 90 150 225 190 A or B Y 4.5 V 21 30 45 38 6V 17 26 38 32 Data D t (Any C) G tt TA = 25°C TYP MAX FROM (INPUT) Y Y Y MIN MIN MAX MIN MAX 2V 73 126 189 158 4.5 V 17 28 42 35 6V 14 23 35 29 2V 38 95 150 125 4.5 V 11 19 28 24 6V 9 16 24 20 2V 20 60 90 75 4.5 V 8 12 18 15 6V 6 10 15 13 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT ns ns 5 SN54HC153, SN74HC153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS112B – DECEMBER 1982 – REVISED MAY 1997 switching characteristics over recommended operating free-air temperature range, CL = 150 pF (unless otherwise noted) (see Figure 1) FROM (INPUT) PARAMETER TO (OUTPUT) A or B Y Data D t (Any C) tpd Y G Y tt Y VCC MIN TA = 25°C TYP MAX SN54HC153 MIN SN74HC153 MAX MIN MAX 2V 105 235 355 295 4.5 V 27 47 71 59 6V 21 41 60 51 2V 93 220 335 274 4.5 V 23 44 67 55 6V 19 38 57 48 2V 60 185 280 230 4.5 V 17 37 56 46 6V 14 32 48 40 2V 45 210 315 265 4.5 V 17 42 63 53 6V 13 36 53 45 UNIT ns ns operating characteristics, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance per multiplexer No load TYP UNIT 40 pF PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point Input VCC 50% 50% 0V CL (see Note A) tPLH In-Phase Output LOAD CIRCUIT 50% 10% tPHL 90% 90% tr Input 50% 10% 90% 90% tr tPHL VCC 50% 10% 0 V Out-of-Phase Output 90% tf VOH 50% 10% VOL tf tPLH 50% 10% tf 50% 10% 90% VOH VOL tr VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated