Tfs195.doc version 1.2 11.09.2000 ______________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 195 1/5 ______________________________________________________________________________________________________ Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedances for input: 1150 Ohm // -1.7 pF for output: 1150 Ohm // -1.7 pF Coupling coil: 197 nH Characteristics Remark: Reference level for the relative attenuation arel of the TFS 195 is the insertion loss. The insertion loss ae is defined as the insertion loss at the nominal frequency fN . The centre frequency fC is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 195,6 MHz without tolerance. The specified values have to be reached in operating temperature range. Data typ. value Insertion loss (Reference level) ae - Nominal frequency fN - Centre frequency fC tolerance/limit 2.3...4.3 195,600 MHz 195,608 MHz - BW 212 - Relative attenuation arel fN ± 1,8 MHz ... fN ± 6 MHz fN ± 6 MHz ... fN ± 100 MHz 42 23...90 1 dB bandwidth VSWR @ fC Group delay @ fC dB kHz dB dB 1.4:1 min. min. 30 20 min. 1.8 : 1 dB dB GD 3,2 Input power µs - max. 6 max. 10 µs dBm Operating temperature range - 5 °C ... + 80 °C Storage temperature range - 30 °C ... + 80 °C Temperature coefficient of frequency Frequency inversion temperature TC - 0.036 ppm/K² 20 °C Generated: Checked / approved: VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs195.doc version 1.2 11.09.2000 ______________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 195 2/5 ______________________________________________________________________________________________________ Construction, pin configuration and 50 Ω - matching network (All dimensions in mm) Datecode: K L M ... TFS195 M36 1 2 3 4 5 6 7 8 9 10 11 12 Year+week 1998 1999 2000 Output Output RF-Return Ground Coupling Coil Ground Ground Input Input RF-Return Ground Ground Ground Ground 50 Ohm Test circuit 50 Ohm L1 7 L2 1 C1 8 SAW 50 Ohm C2 2 L3 3, 5, 6, 9, 10, 11, 12 4 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs195.doc version 1.2 11.09.2000 ______________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 195 3/5 ______________________________________________________________________________________________________ Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Damp heat: (cycle) 25 °C to 55°C / 95% r.H. / 10 cycles DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do E F : : : : : 0,6 2 8 1,5 5,5 7,5 Ct 13,5 ± 0,1 : EMBOSSED CARRIER TAPE 16 ± 0,3 4 ± 0,1 1,5 + 0,1 1,75 ± 0,1 7,5 ± 0,1 G (min) : P2 : P1 : D1(min) : Ao : Bo : 3000 min 300 mm min 500 mm min 300 mm Do Po P2 E Ao F D1 Ct W Bo ± 0,1 ± 0,1 G ± 0,1 ± 0,1 P1 COVER TAPE W 2 Reel (all dimensions in mm): A : W1 W2 (max) : : N (min) : 330 16,4 +2 22,4 50 C C : A 13,0 +0,5/-0,2 N W 1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs195.doc version 1.2 11.09.2000 ______________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 195 4/5 ______________________________________________________________________________________________________ Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods over 200 °C 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs195.doc version 1.2 11.09.2000 ______________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 195 5/5 ______________________________________________________________________________________________________ History Version Reason of Changes Name Date 1.0 - generated according to customer requirement Dr. Sabah 27.06.2000 1.1 - remove pass band width related values - change position of input and output pin - add coupling coil Dr. Wall 25.07.2000 1.2 - add termination impedances and coupling coil value - define insertion loss window - add 50 Ohm test circuit - add typical values for filter data - add maximum value for group delay - correct tape and reel information Dr. Wall 06.09.2000 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.