tfs380a.doc version 3.0 VI TELEFILTER Filter specification 13.03.2001 TFS 380A 1/5 Measurement Condition Ambient Temperature: Input Power Level: Source impedance: Load impedance: Terminating impedances: input: output: 23 0 50 50 °C dBm Ω Ω 720 Ω || -4.7pF 1000 Ω || -4.1pF Characteristics Remark: Reference level for the relative attenuation arel is the minimum pass band attenuation amin. It is defined as the insertion loss ae. The nominal frequency fN is fixed to 380,0 MHz. The center frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1 dB filter attenuation level relative to the insertion loss ae The given values for the insertion loss, the relative attenuation arel and the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data typ. Value Insertion Loss (Reference level) ae = amin Nominal Frequency fN - 1 dB - Bandwidth BW 4,2 MHz Relative Attenuation arel fN ± 2,5 fN ± 3,0 fN ± 3,25 fN ± 3,5 fN ± 5,0 MHz MHz MHz MHz MHz MHz ... fN ± 3,0 MHz ... fN ± 3,25 MHz ... fN ± 3,5 MHz ... fN ± 5,0 MHz ... fN ± 100,0 Pass Band Ripple fN ± 2,025 MHz Group delay ripple fN ± 2,025 MHz 14,0 dB 5 20 35 38 50 Limit max. 17 dB 380,0 MHz min. 4,05 MHz dB dB dB dB dB min. min. min. min. min. 3 10 20 30 40 dB dB dB dB dB 0,4 dB max. 1 dB max. 100 ns ϕ Operating Temperature Range 65 ns - 0 °C ... + 70 °C Generated: Checked / approved: VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs380a.doc version 3.0 VI TELEFILTER Filter specification TFS 380A 13.03.2001 2/5 Construction and pin connection Datecode S 380 A N11 1 2 3 4 5 6 7 8 9 10 11 12 Ground Ground Output RF Return Output Ground Ground Ground Ground Input RF Return Input Ground Ground Datecode: L M N ... Year+week 1999 2000 2001 50 Ω test circuit C1 Input L1 4 10 SAW C2 L2 C3 Output C4 3 9 1,2,5,6,7,8,11,12 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs380a.doc version 3.0 VI TELEFILTER Filter specification 13.03.2001 TFS 380A 3/5 Stability Characteristics: After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Damp heat: (cycle) 25 °C to 55°C / 95% r.H. / 10 cycles DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing: Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Reel of empty components at start: Reel of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do : : : 16 4 1,5 E F : : 1,75 ± 0,1 7,5 ± 0,1 G (min) : P2 : P1 : 0,6 2 ± 0,1 8 ± 0,1 3000 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE ± 0,3 ± 0,1 + 0,5 Do Po P2 E Ao F D1 W Bo Ct G D1(min) : Ao : 1,5 5,5 ± 0,1 Bo : 7,5 ± 0,1 Ct : 13,5+/-0,1 P1 COVER TAPE W 2 Reel (all dimensions in mm): A : W1 W2 (max) : : N (min) : 330 16,4 +2 22,4 50 C C : 13 - + 0,5 A N 0,2 W 1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is readable if the sprocket holes are on the left side of the tape, i.e. pin 1 identifier is close to the sprocket holes. VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs380a.doc version 3.0 VI TELEFILTER Filter specification 13.03.2001 TFS 380A 4/5 Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods over 200 °C 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs380a.doc version 3.0 VI TELEFILTER Filter specification 13.03.2001 TFS 380A 5/5 History Version Reason of Changes Name Date Development specification 1.0 new generation Steiner 11.04.2000 2.0 Steiner 04.08.2000 Steiner 13.03.2001 - correction of attenuation specification according to customer needs - stability characteristics, tape and reel dimensions, air reflow profile added Filter specification 3.0 - terminating impedances added - loss definition corrected - typical values added VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.