STD60NF3LL N-channel 30V - 0.0075Ω - 60A - DPAK STripFET™ II Power MOSFET General features Type VDSS RDS(on) ID STD60NF3LL 60V <0.0095Ω 60A ■ Optimal RDS(ON) x Qg trade-off @ 4.5V ■ Conduction losses reduced ■ Switching losses reduced 3 1 DPAK Description This application specific Power MOSFET is the third genaration of STMicroelectronics unique “Single Feature Size™” strip-based process. The resulting transistor shows the best trade-off between on-resistance ang gate charge. When used as high and low side in buck regulators, it gives the best performance in terms of both conduction and switching losses. This is extremely important for motherboards where fast switching and high efficiency are of paramount importance. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STD60NF3LLT4 D60NF3LL DPAK Tape & reel July 2006 Rev 2 1/13 www.st.com 13 Contents STD60NF3LL Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 ................................................ 8 STD60NF3LL 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol VDS VDGR VGS Parameter Value Unit Drain-source voltage (VGS = 0) 30 V Drain-gate voltage (RGS = 20 kΩ) 30 V ± 16 V Gate- source voltage ID Drain current (continuous) at TC = 25°C 60 A ID Drain current (continuous) at TC = 100°C 43 A Drain current (pulsed) 240 A Total dissipation at TC = 25°C 100 W Derating Factor 0.67 W/°C Single pulse avalanche energy 700 mJ -55 to 175 °C IDM (1) Ptot EAS(2) Tstg Tj Storage temperature Max. operating junction temperature 1. Pulse width limited by safe operating area. 2. Starting Tj=25°C, ID=30A, VDD=27.5V Table 2. Thermal data Rthj-case Thermal resistance junction-case max 1.5 °C/W Rthj-amb Thermal resistance junction-to ambient max 100 °C/W Maximum lead temperature for soldering purpose 300 °C TJ 3/13 Electrical characteristics 2 STD60NF3LL Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250µA, VGS =0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS = Max rating, TC = 125°C IGSS Gate-body leakage current (VDS = 0) VGS = ± 16V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 30A VGS = 4.5V, ID = 30A Table 4. Symbol Test conditions Typ. Max. 30 Unit V 1 10 µA µA ±100 nA 1 V 0.0075 0.0085 0.0095 0.0105 Ω Ω Typ. Max. Unit Dynamic Parameter Test conditions Min. gfs (1) Forward transconductance VDS = 15V, ID = 30A 30 S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1MHz, VGS = 0 2210 635 138 pF pF pF td(on) tr td(off) tf Turn-on delay time Rise time Turn-off delay time Fall time VDD = 15V, ID = 30A RG = 4.7Ω VGS = 4.5V (see Figure 12) 22 130 36.5 36.5 ns ns ns ns Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 24V, ID = 60A, VGS = 4.5V, RG = 4.7Ω (see Figure 13) 30 9 12.5 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 4/13 Min. 40 nC nC nC STD60NF3LL Electrical characteristics Table 5. Symbol Source drain diode Parameter ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD trr Qrr IRRM Test conditions Min. Typ. ISD = 60A, VGS = 0 Reverse recovery time ISD = 60A, di/dt = 100A/µs, Reverse recovery charge VDD = 15V, Tj = 150°C Reverse recovery current (see Figure 14) 65 105 3.4 Max. Unit 60 240 A A 1.2 V ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/13 Electrical characteristics STD60NF3LL 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/13 STD60NF3LL Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/13 Test circuit 3 STD60NF3LL Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/13 Figure 17. Switching time waveform STD60NF3LL 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/13 Package mechanical data STD60NF3LL DPAK MECHANICAL DATA mm. inch DIM. MAX. MIN. A A1 A2 B b4 MIN. 2.2 0.9 0.03 0.64 5.2 TYP 2.4 1.1 0.23 0.9 5.4 0.086 0.035 0.001 0.025 0.204 0.094 0.043 0.009 0.035 0.212 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 0.45 0.48 6 0.6 0.6 6.2 0.017 0.019 0.236 0.023 0.023 0.244 6.6 0.252 5.1 6.4 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.260 0.185 0.090 4.6 10.1 0.6 MAX. 0.200 4.7 2.28 4.4 9.35 1 TYP. 0.039 0.008 8° 0° 8° 0068772-F 10/13 STD60NF3LL 5 Packing mechanical data Packing mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 1.5 D1 1.5 E 1.65 MIN. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 7.4 7.6 0.291 0.299 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 40 15.7 MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 0.059 F R MIN. MAX. K0 W inch MAX. 1.574 16.3 0.618 0.641 11/13 Revision history 6 STD60NF3LL Revision history Table 6. 12/13 Revision history Date Revision Changes 09-Sep-2004 4 Preliminary version 19-Jul-2006 5 New template, no content change STD60NF3LL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 13/13