SBU80 SERIES 80W Open Frame Switching Power Supplies For I.T.E. Description: The SBU80 series of compact, open frame constructed, AC/DC switching mode power supplies provide 80 Watts of continuous output power .They are suited for use in based systems, portable equipments and many other applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1:2ndEdition),TUV/Bauart(EN 60950-1:2ndEdition) and new CE requirements. All units are 100% burned in and tested. Features: Wide Operating Voltage 90 to 260 VAC,47 to 63 Hz Internal EMI filter Dual and Triple Output Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal Input Surge Current, Over Voltage and Over Load protection Over Voltage Protection (Crowbar Design) Active Power Factor Correction Size: 3"x5"x1.18" Class I 2 year warranty Safety Approvals : BAUART GEPRUFT Product Safety CB TYPE APPROVED Electrical Characteristics: Sym. Vin fin Test Conditions Min. Typ. Max. Unit Safety Approvals Input Voltage Range 100 240 VAC Operate Voltage Range 90 260 VAC 47 63 Hz Input Frequency PF Power Factor Correction Io=Full load, Vin=90~260VAC Po Output Power Range Vin=90 to 260 VAC Vo Output Voltage Range Io * Parameter Output Current Range 0.95 0.97 1.0 80 0 W See rating Chart V See rating Chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.2 Iih Input Current (High Line) 0.6 A A I rl Low Line Inrush Current I rh High Line Inrush Current Eff Efficiency Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full load, REG-i Line Regulation Io=Full load REG -o Load Regulation Vin=230VAC Vin=230VAC 25 C,Cool start, 39 45 A 25 C,Cool start, 78 90 A Vin=230VAC 70 OVP Over Voltage Protection 112 OCP Over Current Protection 110 Ttr Time of Transient Response Io=Full load to Half Load, Vin=100VAC Thold Hold-Up Time Io=Full load, Vin=110VAC Ts Start Up Time Io=Full load, Vin=100VAC Vp-p Ripple & Noise (Peak to Peak) Full load, Vin=90VAC Ilk Safety Ground Leakage Current Io=Full load, Vin=240VAC TC Temperature All output Coefficient 80 85 % 0.5 1 % 5 7 % 132 % 150 % 4 mS mS 16 0.5 2 S 1 % 0.5 0.75 -0.04 mA 0.04 %/ C Min. Typ. Max. Unit 50 C C % % Hrs * Note: The Ripple & Noise which is under 3.3VDC at 2% max Environmental : Sym. Toper Tstg Ho Hr MTBF Pd Parameter T e s t Conditions Operating Temperature Storage Temperature Operating Humidity Storage Humidity Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Derate linearly from 100% load at 50 C to 50% load at 70 C 0 -40 0 0 0.1M 70 85 95 75 SBU80 SERIES 80W Open Frame Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Vpg Ris Parameter CISPR EMI requirements for CISPR-22 FCC Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC T e s t Conditions Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to Ground Isolation Resistance EMI requirements for FCC PART-15 M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Multi Output ) : Model Number SBU80-200 SBU80-201 SBU80-202 SBU80-203 SBU80-204 SBU80-215 SBU80-300 SBU80-300-1 SBU80-301 SBU80-301-1 SBU80-302 SBU80-302-1 SBU80-303 SBU80-303-1 SBU80-304 SBU80-304-1 SBU80-305 SBU80-305-1 SBU80-306 SBU80-306-1 SBU80-307 SBU80-307-1 SBU80-308 SBU80-308-1 Output #2 Output # 1 Output #3 Maximum Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Output Power +3.3V +5V +5V +5V +3.3V +5V +3.3V +3.3V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +3.3V +3.3V +5V +5V +3.3V +3.3V 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 1.2A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 7% 5% 5% 5% 7% 5% 7% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 7% 7% 5% 5% 7% 7% Mechanical Specifications : +12V +12V +15V +24V +5V 0.5A 0.5A 0.5A 0.3A 0.5A 5A 5A 5A 3A 5A 5% 5% 5% 5% 5% +12V +12V +12V +12V +12V +12V +15V +15V +24V +24V +24V +24V +12V +12V +10V +10V +5V +5V 0.5A 0.5A 0.5A 0.5A 0.5A 0.5A 0.5A 0.5A 0.3A 0.3A 0.3A 0.3A 0.5A 0.5A 0.5A 0.5A 0.5A 0.5A 5A 5A 5A 5A 5A 5A 5A 5A 3A 3A 3A 3A 5A 5A 5A 5A 5A 5A 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% -24V -12V +12V -5V +5V -12V +12V -15V +15V -24V +24V -12V +12V -5V +5V -10V +10V -12V +12V 2A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 1.0A 1.0A 1.0A 1.0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 80W 80W 80W 80W 64.6W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 80W 76.6W 76.6W 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% PIN CHART PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 SBU80-215-13PIN N/C N/C Vo1 Vo1 Vo1 Vo1 COM COM COM Vo3 COM COM N/C SBU80-2XX-13PIN Vo2 Vo2 Vo1 Vo1 Vo1 Vo1 COM COM COM N/C COM COM N/C SBU80-3XX-13PIN Vo2 Vo2 Vo1 Vo1 Vo1 Vo1 COM COM COM Vo3 COM COM N/C Note: Vo1:Output#1 Vo2:Output#2 Vo3:Output#3 Note: 1. Dimensions are shown in inches or mm. 2. Weight: 350gs approx. 3. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal.