MOS FET Relays G3VM-21LR World’s Smallest SSOP Package MOS FET Relay* with Low Output Capacitance and ON Resistance (C×R = 5pF• Ω) in a 20-V Load Voltage Model • Output capacitance of 1 pF (typical) allows high frequency applications. • RoHS Compliant. *Information correct as of May, 2007, according to data obtained by OMRON. ■ Application Examples • Semiconductor inspection tools • Measurement devices and Data loggers • Broadband systems Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) Model 20 VAC Number per tape G3VM-21LR --- G3VM-21LR(TR) 1,500 G3VM-21LR(TR05) 500 G3VM-21LR(TR10) 1,000 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR 4.2 228 1.7 1.4 dia. 3.5 0.15 Note: The actual product is marked differently from the image shown here. 0.3 1.27 0.2 1.8 Note: A tolerance of ±0.1 mm applies to all dimensions unless otherwise specified. 3.8 2.04 0.46±0.2 Weight: 0.03 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-21LR 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR 231 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement conditions LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 μs pulses, 100 pps LED forward current reduction rate Δ IF/°C −0.5 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C VOFF 20 V Continuous load current IO 160 mA ON current reduction rate Δ ION/°C −1.6 Connection temperature Tj Output Load voltage (AC peak/DC) Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ≥ 25°C mA/°C 125 °C Dielectric strength between input and VI-O output (See note 1.) 1,500 Vrms AC for 1 min Operating temperature Ta −20 to +85 °C With no icing or condensation Storage temperature Tstg −40 to +125 °C Soldering temperature (10 s) --- 260 With no icing or condensation °C 10 s ■ Electrical Characteristics (Ta = 25°C) Item Input Minimum Symbol Typical Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 μA VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz --- --- 4 mA IO = 100 mA RON --- 5 8 Ω IF = 5 mA, IO = 160 mA, t = 10 ms Current leakage when the relay is open ILEAK --- 0.2 1.0 nA VOFF = 20 V, Ta = 50°C Capacity between terminals COFF --- 1.0 2.5 pF V = 0, f = 100 MHz, t<1s Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MΩ VI-O = 500 VDC, RoH ≤ 60% Turn-ON time tON --- 0.06 0.5 ms Turn-OFF time tOFF --- 0.12 0.5 ms IF = 10 mA, RL = 200 Ω, VDD = 20 V (See note 2.) ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 20 V Operating LED forward current IF 7 --- 30 mA Continuous load current (AC peak/DC) IO --- --- 160 mA Operating temperature 25 --- 60 °C 232 Ta MOS FET Relays G3VM-21LR 2. Turn-ON and Turn-OFF Times IF IFT Trigger LED forward current Output Maximum resistance with output ON Note: 1 4 2 3 RL VDD VOUT IF VOUT 10% t ON 90% t OFF ■ Engineering Data Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 0 20 40 60 80 100 280 240 200 160 120 80 40 0 -20 120 0 20 Ambient temperature Ta (ഒ) On-state resistance RON (Ω) 100 Ta = 25 °C I F = 5 mA 100 50 0 -50 -100 -0.5 0 0.5 I O = 160 mA I F = 5 mA t < 1s 8 6 4 2 0 -20 1 Turn ON, Turn OFF time tON, tOFF (μS) Ta = 25 °C V DD = 10 V, RL = 200 Ω t OFF 30 10 1 t ON 1 3 10 30 1 0.5 0.3 0.8 0 20 40 60 80 100 100 LED forward current IF (mA) 200 t OFF 100 0 -20 t ON 0 20 40 60 1.4 1.6 1.8 I O = 100 mA t < 1s 4 3 2 1 0 -20 0 20 40 60 80 100 Current leakage vs. Load voltage I LEAK – VOFF V DD = 10 V, RL = 200 Ω I F = 10 mA 50 1.2 Ambient temperature Ta (ഒ) 250 150 1 5 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta 1000 3 3 Ambient temperature Ta (ഒ) Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF 100 5 Trigger LED forward current vs. Ambient temperature IFT - Ta 10 On-state voltage VON (V) 300 10 LED forward voltage VF (V) -150 -200 -1 30 0.1 0.6 120 Current leakage ILEAK (pA) Continuous load current IO (mA) 80 Ta = 25 °C 50 On-state resistance vs. Ambient temperature RON - Ta 200 Turn ON, Turn OFF time tON, tOFF (μS) 60 100 Ambient temperature Taഒ Continuous load current vs. On-state voltage IO - VON 150 40 Trigger LED forward current I F T (mA) 0 -20 LED forward current vs. LED forward voltage IF - VF LED forward current I F (mA) 100 Continuous load current I O (mA) LED forward current IF (mA) LED forward current vs. Ambient temperature IF - Ta 80 100 15 Ta = 25 °C 10 5 0 Ambient temperature Ta (ഒ 5 10 15 20 Load voltage VOFF(v) Output terminal capacitance COFF/COFF(ov) vs. Load voltage COFF᧩VOFF 1 Output terminal capacitance COFF/COFF(ov) Ta = 25 ഒ 0.8 0.6 0.4 0.2 0 10 20 30 Load voltage VOFF(v) MOS FET Relays G3VM-21LR 233 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-21LR Printed in USA