STMICROELECTRONICS STPS30SM80C

STPS30SM80C
Power Schottky rectifier
Features
A1
K
■
High junction temperature capability
■
Optimized trade-off between leakage current
and forward voltage drop
■
Low leakage current
■
Avalanche capability specified
■
Insulated package TO-220FPAB
– insulated voltage: 2000 V
– package capacitance: 45 pF
A2
K
K
A2
A2
A1
K
A1
D2PAK
STPS30SM80CG-TR
I2PAK
STPS30SM80CR
K
Description
This dual diode Schottky rectifier is suited for high
frequency switch mode power supply.
Packaged in TO-220AB, I2PAK, D2PAK and TO220FPAB, this device is particularly suited for use
in notebook, game station, LCD TV and desktop
adapters, providing these applications with a
good efficiency at both low and high load.
Table 1.
A1
K
A2
A1
K
TO-220AB
STPS30SM80CT
TO-220FPAB
STPS30SM80CFP
Electrical characteristics(a)
Figure 1.
Device summary
Symbol
IF(AV)
2 x 15 A
VRRM
80 V
Tj (max)
175 °C
VF (typ)
515 mV
I
V
Value
A2
"Forward"
I
2 x IO
X
IF
VRRM
VR
VAR
IO
X
V
IR
VTo VF(Io) VF VF(2xIo)
"Reverse"
IAR
a. VARM and IARM must respect the reverse safe
operating area defined in Figure 13. VAR and IAR are
pulse measurements (tp < 1 µs). VR, IR, VRRM and VF,
are static characteristics
April 2011
Doc ID 018727 Rev 1
1/11
www.st.com
11
Characteristics
1
STPS30SM80C
Characteristics
Table 2.
Absolute ratings (limiting values, per diode, at Tamb = 25 °C unless
otherwise specified)
Symbol
Parameter
Value
Unit
VRRM
Repetitive peak reverse voltage
80
V
IF(RMS)
Forward rms current
30
A
15
30
A
IF(AV)
Tc = 150 °C Per diode
TO-220AB,
I2PAK, D2PAK Tc = 145 °C Per device
Average forward current,
δ = 0.5
TO-220FPAB
IFSM
Surge non repetitive
forward current
Tc = 105 °C Per diode
tp = 10 ms sinusoidal
PARM(1) Repetitive peak avalanche power
Tc = 25 °C
Tj = 25 °C, tp = 1 µs
15
220
A
7600
W
VARM(2)
Maximum repetitive peak
avalanche voltage
tp < 1 µs, Tj < 150 °C, IAR < 22.8 A
100
V
VASM(2)
Maximum single pulse
peak avalanche voltage
tp < 1 µs, Tj < 150 °C, IAR < 22.8 A
100
V
-65 to +175
°C
175
°C
Tstg
Tj
Storage temperature range
Maximum operating junction
temperature(3)
1. For temperature or pulse time duration deratings, please refer to figure 3 and 4. More details regarding the
avalanche energy measurements and diode validation in the avalanche are provided in the application
notes AN1768 and AN2025.
2. See Figure 13
3.
1
dPtot <
condition to avoid thermal runaway for a diode on its own heatsink
Rth(j-a)
dTj
Table 3.
Thermal parameters
Symbol
Parameter
TO-220AB
I2PAK, D2PAK
Rth(j-c)
Junction to case
TO-220FPAB
Rth(c)
Coupling
Value
per diode
1.90
total
1.03
per diode
5.30
total
4.20
TO-220AB
I2PAK, D2PAK
0.15
TO-220FPAB
3.10
When the two diodes 1 and 2 are used simultaneously:
ΔTj(diode 1) = P(diode 1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c)
2/11
Doc ID 018727 Rev 1
Unit
°C/W
°C/W
STPS30SM80C
Table 4.
Characteristics
Static electrical characteristics (per diode)
Symbol
Parameter
IR(1)
Test conditions
Tj = 25 °C
Reverse leakage current
VR = VRRM
Tj = 125 °C
Tj = 25 °C
IF = 7.5 A
Tj = 125 °C
VF(2)
Tj = 25 °C
Forward voltage drop
IF = 15 A
Tj = 125 °C
Tj = 25 °C
IF = 30 A
Tj = 125 °C
Min.
Typ.
Max.
Unit
-
10
40
µA
mA
-
7
20
-
0.590
0.655
-
0.515
0.555
-
0.715
0.790
-
0.600
0.675
-
0.860
0.965
-
0.710
0.830
V
1. Pulse test: tp = 5 ms, δ < 2 %
2. Pulse test: tp = 380 µs, δ < 2 %
To evaluate the conduction losses use the following equation:
P = 0.520 x IF(AV) + 0.0103 x IF2(RMS)
Figure 2.
15.0
Average forward power dissipation Figure 3.
versus average forward current
(per diode)
PF(AV)(W)
IF(AV)(A)
18
δ = 0.05
δ = 0.1
δ = 0.2
δ=1
δ = 0.5
Average forward current versus
ambient temperature
(δ = 0.5, per diode)
Rth(j-a) = Rth(j-c)
16
12.5
14
10.0
2
2
TO-220AB / I PAK / D PAK
12
10
7.5
TO-220FPAB
8
5.0
6
4
T
2.5
δ = tp / T
Tamb(°C)
0
0
2
Figure 4.
1
2
IF(AV)(A)
tp
0.0
4
6
8
10
12
14
16
18
20
Normalized avalanche power
derating versus pulse duration
0
25
Figure 5.
PARM(tp)
PARM(1µs)
1.2
50
75
100
125
150
175
Normalized avalanche power
derating versus junction
temperature
PARM(Tj)
PARM(25 °C)
1
0.1
0.8
0.6
0.4
0.01
0.2
0.001
0.01
tp(µs)
0.1
1
10
100
1000
0
25
Doc ID 018727 Rev 1
Tj(°C)
50
75
100
125
150
3/11
Characteristics
Figure 6.
180
STPS30SM80C
Non repetitive surge peak forward
current versus overload duration
(maximum values, per diode)
IM(A)
2
110
2
TO-220AB / I PAK / D PAK
Non repetitive surge peak forward
current versus overload duration
(maximum values, per diode)
IM(A)
TO-220FPAB
100
160
90
140
80
120
70
Tc = 25 °C
100
Tc = 75 °C
50
40
Tc = 125 °C
60
Tc = 25 °C
60
Tc = 75 °C
80
Tc = 125 °C
30
40
IM
20
20
t
δ = 0.5
0
1.E-03
1.E-01
1.E+00
Relative thermal impedance
junction to case versus pulse
duration
1.0
1.E-01
1.E+00
Relative thermal impedance
junction to case versus pulse
duration (TO-220FPAB)
Zth(j-c)/Rth(j-c)
TO-220FPAB
0.9
0.8
0.8
0.7
0.7
0.6
0.6
0.5
0.5
0.4
0.4
0.3
0.2
t(s)
1.E-02
2
TO-220AB / I PAK / D PAK
0.9
t
δ = 0.5
0
1.E-03
Figure 9.
Zth(j-c)/Rth(j-c)
2
IM
10
t(s)
1.E-02
Figure 8.
1.0
Figure 7.
0.3
Single pulse
Single pulse
0.2
0.1
0.1
tp(s)
0.0
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
Figure 10. Reverse leakage current versus
reverse voltage applied
(typical values, per diode)
tp(s)
1.E-02
1.E-01
1.E+00
1.E+01
Figure 11. Junction capacitance versus
reverse voltage applied
(typical values, per diode)
IR(µA)
1.E+05
0.0
1.E-03
C(pF)
1000
F = 1 MHz
Vosc = 30 mVRMS
Tj = 25 °C
Tj = 150 °C
1.E+04
Tj = 125 °C
Tj = 100 °C
1.E+03
Tj = 75 °C
1.E+02
Tj = 50 °C
1.E+01
Tj = 25 °C
VR(V)
1.E+00
0
4/11
10
20
30
40
50
60
70
80
VR(V)
100
1
Doc ID 018727 Rev 1
10
100
STPS30SM80C
Characteristics
Figure 12. Forward voltage drop versus
forward current (per diode)
30
Figure 13. Reverse safe operating area
(tp < 1 µs and Tj < 150 °C)
IFM(A)
23.0
Tj = 125 °C
(Maximum values)
25
Iarm (A)
Iarm (Varm) 150 °C, 1µs
22.0
21.0
20
20.0
Tj = 125 °C
(Typical values)
15
19.0
18.0
10
Tj = 25 °C
(Maximum values)
17.0
5
0
0.0
16.0
Varm (V)
VFM(V)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
15.0
100 105 110 115 120 125 130 135 140 145 150
1.0
Figure 14. Thermal resistance junction to ambient versus copper surface under tab for D2PAK
80
Rth(j-a)(°C/W)
epoxy printed board copper thickness = 35 µm
70
2
60
D PAK
50
40
30
20
10
2
SCu(cm )
0
0
5
10
15
20
25
Doc ID 018727 Rev 1
30
35
40
5/11
Package information
2
STPS30SM80C
Package information
●
Epoxy meets UL94, V0
●
Cooling method: by conduction (C)
●
Recommended torque value: 0.4 to 0.6 N·m
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 5.
TO-220AB dimensions
Dimensions
Ref.
Dia
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.066
F2
1.14
1.70
0.044
0.066
G
4.95
5.15
0.194
0.202
G1
2.40
2.70
0.094
0.106
H2
10
10.40
0.393
0.409
C
L5
L7
L6
L2
F2
D
L9
L4
L2
F
M
G1
16.4 Typ.
0.645 Typ.
L4
13
14
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.20
6.60
0.244
0.259
L9
3.50
3.93
0.137
0.154
E
G
M
Dia.
6/11
Inches
A
H2
F1
Millimeters
Doc ID 018727 Rev 1
2.6 Typ.
3.75
3.85
0.102 Typ.
0.147
0.151
STPS30SM80C
Package information
Table 6.
TO-220FPAB dimensions
Dimensions
Ref.
A
Millimeters
Inches
Min.
Max.
Min.
Max.
A
4.4
4.9
0.173
0.192
B
2.5
2.9
0.098
0.114
D
2.45
2.75
0.096
0.108
E
0.4
0.7
0.016
0.028
F
0.6
1
0.024
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.205
G1
2.4
2.7
0.094
0.106
H
10
10.7
0.394
0.421
B
H
Dia.
L6
L2
L7
L3
F1
L4
F2
D
L2
F
E
16 Typ.
0.630 Typ.
L3
28.6
30.6
1.126
1.205
L4
9.8
10.7
0.386
0.421
L6
15.8
16.4
0.622
0.646
L7
9
9.9
0.354
0.390
Dia.
2.9
3.5
0.114
0.138
G1
G
Doc ID 018727 Rev 1
7/11
Package information
Table 7.
STPS30SM80C
D2PAK dimensions
Dimensions
Ref.
Millimeters
Inches
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.70
0.93
0.027
0.037
B2
1.14
1.70
0.045
0.067
C
0.45
0.60
0.017
0.024
C2
1.23
1.36
0.048
0.054
D
8.95
9.35
0.352
0.368
E
10.00
10.40
0.393
0.409
G
4.88
5.28
0.192
0.208
L
15.00
15.85
0.590
0.624
L2
1.27
1.40
0.050
0.055
L3
1.40
1.75
0.055
0.069
M
2.40
3.20
0.094
0.126
A
E
C2
L2
D
L
L3
A1
B2
R
C
B
G
A2
M
*
V2
* FLAT ZONE NO LESS THAN 2mm
R
0.40 typ.
V2
0°
0.016 typ.
8°
Figure 15. D2PAK footprint (dimensions in mm)
16.90
10.30
5.08
1.30
8.90
8/11
Doc ID 018727 Rev 1
3.70
0°
8°
STPS30SM80C
Package information
Table 8.
I2PAK dimensions
Dimensions
Ref.
Millimeters
Inches
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
A1
2.40
2.72
0.094
0.107
b
0.61
0.88
0.024
0.035
b1
1.14
1.70
0.044
0.067
c
0.49
0.70
0.019
0.028
c2
1.23
1.32
0.048
0.052
D
8.95
9.35
0.352
0.368
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.195
0.203
E
10
10.40
0.394
0.409
L
13
14
0.512
0.551
L1
3.50
3.93
0.138
0.155
L2
1.27
1.40
0.050
0.055
A
E
c2
L2
D
L1
A1
b1
L
b
c
e
e1
Doc ID 018727 Rev 1
9/11
Ordering information
3
STPS30SM80C
Ordering information
Table 9.
Ordering information
Order code
Marking
STPS30SM80CT
PS30SM80CT
STPS30SM80CFP
PS30SM80CFP
STPS30SM80CR
STPS30SM80CG-TR
4
Weight
Base qty Delivery mode
TO-220AB
1.9 g
50
Tube
TO-220FPAB
2.0 g
50
Tube
PS30SM80CR
I2
PAK
1.49 g
50
Tube
PS30SM80CG
2
1.48 g
1000
Tape and reel
D PAK
Revision history
Table 10.
10/11
Package
Revision history
Date
Revision
11-Apr-2011
1
Changes
First issue.
Doc ID 018727 Rev 1
STPS30SM80C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 018727 Rev 1
11/11