2SA2124 Ordering number : EN7920B SANYO Semiconductors DATA SHEET 2SA2124 PNP Epitaxial Planar Silicon Transistor High-Current Switching Applications Applicaitons Voltage regulators, relay drivers, lamp drivers, electrical equipment • Features Adoption of MBIT processes Large current capacity • • • • Low collector-to-emitter saturation voltage High-speed switching Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage Unit --30 V --30 V VEBO IC ICP Collector Current Collector Current (Pulse) --6 V --2 A --5 A Continued on next page. Package Dimensions Product & Package Information unit : mm (typ) 7007B-004 • Package : PCP • JEITA, JEDEC : SC-62, SOT-89, TO-243 • Minimum Packing Quantity : 1,000 pcs./reel Top View 2SA2124-TD-E 2.5 2 0.4 4.0 1.0 1 Packing Type: TD 1.5 TD Marking LOT No. 1.6 AX 4.5 3 0.4 0.5 1.5 3.0 Electrical Connection 2 0.75 1 1 : Base 2 : Collector 3 : Emitter Bottom View 3 SANYO : PCP http://www.sanyosemi.com/en/network/ O1712 TKIM TC-00002827/80509 TKIM TC-00002048/D2004EA TSIM TB-00000072 No.7920-1/7 2SA2124 Continued from preceding page. Parameter Symbol Base Current Conditions Ratings IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Unit --400 mA When mounted on ceramic substrate (450mm2×0.8mm) 1.3 W Tc=25°C 3.5 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage ICBO IEBO hFE1 VCE=--2V, IC=--100mA hFE2 VCE=--2V, IC=--1.5A fT VCE(sat) VCE=--10V, IC=--300mA Collector-to-Emitter Breakdown Voltage V(BR)CEO V(BR)EBO Cob Emitter-to-Base Breakdown Voltage Output Capacitance Turn-ON Time ton tstg tf Storage Time Fall Time Ratings min typ max VCB=--30V, IE=0A VEB=--4V, IC=0A VBE(sat) V(BR)CBO Collector-to-Base Breakdown Voltage Conditions 200 Unit --0.1 μA --0.1 μA 560 65 440 IC=--1.5A, IB=--75mA IC=--1.5A, IB=--75mA MHz --0.2 --0.4 --0.95 --1.2 V V IC=--10μA, IE=0A --30 V IC=--1mA, RBE=∞ IE=--10μA, IC=0A --30 V --6 VCB=--10V, f=1MHz See specified Test Circuit. V 17 pF 45 ns 200 ns 23 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT IC OUTPUT IB2 VR 50Ω RB + 220μF VBE=5V RL + 470μF VCC= --12V IC=20IB1= --20IB2= --0.5A Ordering Information Device 2SA2124-TD-E Package Shipping memo PCP 1,000pcs./reel Pb Free No.7920-2/7 2SA2124 IC -- VCE --3 5m A --3 0m Collector Current, IC -- A --1.6 A A --1.8 0m --25 --4 IC -- VBE --2.0 0mA --2 VCE= --2V --15mA --10mA --1.4 --1.2 --1.0 --5mA --0.8 --0.6 --2mA --1.5 --1.0 Ta= 75°C 25°C --25 °C mA Collector Current, IC -- A --2.0 --0.5 --0.4 --0.2 IB=0mA 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 Collector-to-Emitter Voltage, VCE -- V 0 0 --2.0 --0.4 --0.6 --0.8 VCE= --10V Gain-Bandwidth Product, f T -- MHz VCE= --2V DC Current Gain, hFE Ta=75°C 25°C --25°C 2 100 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 5 3 2 100 7 5 --0.01 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 3 5 2 3 IT07251 --0.1 7 °C 75 C 5° --2 5 = Ta 3 °C 25 2 2 3 3 5 7 --1.0 2 5 ASO <10μs ICP= --5A 1m IC= --2A 2 s 10 ms Di 10 ssi 0m pa s t DC ion L op im era ite tio d n --1.0 7 5 3 s 0μ 2 Li --0.1 7 5 ted mi Collector Current, IC -- A 3 IT07253 /B 5 2 50 75°C 7 --0.1 s 0μ 10 --10 7 5 Ta= --25°C 5 S Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 --1.0 2 3 25°C 5 Collector Current, IC -- A IC / IB=20 7 3 3 IT07252 2 --1.0 2 VCE(sat) -- IC --0.01 --0.01 VBE(sat) -- IC 3 7 --0.1 IC / IB=20 2 5 5 5 3 3 3 Collector Current, IC -- A f=1MHz 2 2 IT07250 5 10 --0.1 7 Cob -- VCB 7 Output Capacitance, Cob -- pF 2 IT07249 f T -- IC 1000 5 3 --1.0 Base-to-Emitter Voltage, VBE -- V hFE -- IC 7 --0.2 IT07248 3 2 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT07254 Tc=25°C Single Pulse --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 3 5 IT07255 No.7920-3/7 2SA2124 PC -- Ta 1.4 PC -- Tc 4.0 1.3 ou Collector Dissipation, PC -- W Collector Dissipation, PC -- W 3.5 M 1.2 nt 1.0 ed on ac er am ic 0.8 bo ar 0.6 d (4 50 m 0.4 m2 ✕ 0. 8m m ) 0.2 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT07256 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT08355 No.7920-4/7 2SA2124 Bag Packing Specification 2SA2124-TD-E No.7920-5/7 2SA2124 Outline Drawing 2SA2124-TD-E Land Pattern Example Mass (g) Unit 0.058 mm * For reference Unit: mm 0.9 2.2 3.7 45° 45° 1.0 1.8 1.5 1.0 1.5 3.0 No.7920-6/7 2SA2124 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2012. Specifications and information herein are subject to change without notice. PS No.7920-7/7