15C02MH Ordering number : EN7354B SANYO Semiconductors DATA SHEET NPN Epitaxial Planar Silicon Transistor 15C02MH Low-Frequency General-Purpose Amplifier Applications Applications • Low-frequency amplifer, high-speed switching, small motor drive Features • • • • Large current capacity Low collector-to-emitter saturation voltage (resistance) RCE (sat) typ.=300mΩ [IC=1A, IB=50mA] Ultrasmall package facilitates miniaturization in end products Small ON-resistance (Ron) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage VEBO IC ICP Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg 0.25 V 1 A 15C02MH-TL-E Packing Type : TL °C °C Marking 0 to 0.02 CK LOT No. LOT No. 3 A mW 150 • Package : MCPH3 • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel 1.6 5 --55 to +150 Product & Package Information 0.25 TL 1 0.65 2 Electrical Connection 0.3 3 0.07 0.85 2.1 V 600 unit : mm (typ) 7019A-004 0.15 V 15 2 When mounted on ceramic substrate (600mm2×0.8mm) Package Dimensions 2.0 Unit 20 1 : Base 2 : Emitter 3 : Collector 1 SANYO : MCPH3 2 http://www.sanyosemi.com/en/network/ 90512 TKIM/91003 TSIM/13003 TSIM TA-100138 No.7354-1/6 15C02MH Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=12V, IE=0A VEB=4V, IC=0A VCE=2V, IC=50mA Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) VCB=10V, f=1MHz IC=400mA, IB=20mA Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Ratings Conditions min typ Unit max 300 100 nA 100 nA 800 VCE=2V, IC=50mA 440 MHz 4 IC=400mA, IB=20mA pF 140 280 mV 0.9 1.2 V V(BR)CBO V(BR)CEO IC=10μA, IE=0A 20 V IC=1mA, RBE=∞ 15 V V(BR)EBO ton IE=10μA, IC=0A 5 tstg tf See specified Test Circuit. V 30 ns 165 ns 25 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT OUTPUT IB2 RB VR RL 50Ω + 470μF + 220μF VBE= --5V VCC=5V IC=20IB1= --20IB2=400mA Ordering Information Device 15C02MH-TL-E Shipping memo MCPH3 3,000pcs./reel Pb Free IC -- VCE 800 700 A VCE=2V 7 .0m 10 5.0mA 1000 3.0mA 600 2.0mA 1.5mA 500 400 1.0mA 300 0.6mA 200 800 600 Ta=7 5°C 25°C --25°C 900 IC -- VBE 1200 .0mA Collector Current, IC -- mA 2 30.0 0.0mA mA 1000 Collector Current, IC -- mA Package 400 200 0.3mA 100 0 0 IB=0mA 100 200 300 400 500 600 700 800 Collector-to-Emitter Voltage, VCE -- mV 900 1000 IT05037 0 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 IT05038 No.7354-2/6 15C02MH hFE -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV DC Current Gain, hFE 25°C 5 IC / IB=20 7 Ta=75°C 7 VCE(sat) -- IC 1000 VCE=2V --25°C 3 2 5 3 2 100 C 5° =7 5°C a T --2 7 5 3 2 25 °C 10 7 5 100 1.0 2 3 5 7 10 3 2 5 7 100 2 3 5 7 1000 IT05039 Collector Current, IC -- mA 2 3 5 7 10 2 3 5 7 100 2 IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 100 7 C 5° =7 C a T 5° --2 5 3 °C 25 2 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05043 Collector Current, IC -- mA 1.0 Ta= --25°C 7 75°C 25°C 5 2 3 5 7 10 2 3 5 7 100 2 3 fT -- IC 1000 7 5 3 2 2 5 3 7 2 10 Collector-to-Base Voltage, VCB -- V f=1MHz 3 2 100 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05040 Collector Current, IC -- mA PC -- Ta 700 1kΩ OUT IN 5 1kΩ 3 IB 2 1.0 7 5 3 2 0.1 0.1 5 IT05041 Collector Dissipation, PC -- mW 7 7 7 1.0 3 Ron -- IB 10 ON Resistance, Ron -- Ω VCE=2V Gain-Bandwidth Product, fT -- MHz Output Capacitance, Cob -- pF f=1MHz 1.0 1.0 5 7 1000 IT05044 Collector Current, IC -- mA Cob -- VCB 10 2 3 1.0 10 1.0 5 7 1000 IT05042 VBE(sat) -- IC 3 IC / IB=50 7 3 Collector Current, IC -- mA VCE(sat) -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 1.0 600 M ou nt 500 ed on ac er 400 am ic bo ar 300 d( 60 0m m2 ✕ 200 0. 8m m ) 100 0 2 3 5 7 1.0 2 Base Current, IB -- mA 3 5 7 10 IT06664 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT05046 No.7354-3/6 15C02MH Embossed Taping Specification 15C02MH-TL-E No.7354-4/6 15C02MH Outline Drawing 15C02MH-TL-E Land Pattern Example Mass (g) Unit 0.007 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.7354-5/6 15C02MH Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2012. Specifications and information herein are subject to change without notice. PS No.7354-6/6