NEW COMPACT TYPE PMT SERIES New Electro-Optical Design 13mm (1/2 Inch) Diameter, 9-stage, Side-on Type Our new electro-optic construction allows Hamamatsu to introduce an improved line of compact side-on PMTs. The X-axis anode uniformity full width half maximum (FWHM) is greater than existing models. This wider "sweet" spot increases detection efficiency and can make optical alignment easier. The R6357 is a unique addition, it is the new meshless multialkali compact PMT having over 100mA/W photocathode radiant sensitivity. Left: Quartz window Center: UV window Right: Meshless type (R6357) APPLICATIONS Emission Spectroscopy (ICP, Direct Reader) Environmental Monitoring (NOx, SO2, etc.) Fluorescence Immunoassay Chemiluminescence Immunoassay Hygiene Monitor (Bio Luminescence) X-ray Phototimer Fluorometer Microscope (Laser Scanning Microscope) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATS U is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1998 Hamamatsu Photonics K.K. NEW COMPACT TYPE PMT SERIES Side-On New Compact Type Photomultiplier Tubes Spectral Response Type No. Range Remarks (nm) Peak PhotoWave- cathode Window Outline length Material Material No. Dynode Structure Socket No. of Stages Socket Assembly (nm) Cathode Sensitivity Luminous Maximum Ratings Anode to Average Cathode Anode Min. Typ. Voltage Current (Vdc) (mA) (µA/lm) (µA/lm) R6350 For UV to visible range, 185 to 650 general purpose. 340 Sb-Cs U 1 CC/9 E678-11U/ 1250 0.01 20 40 R6351 Synthetic silica window type of R6350 160 to 650 340 Sb-Cs Q 2 CC/9 E678-11U/ 1250 0.01 20 40 R6352 High sensitivity variant of R6350 185 to 750 420 BA U 1 CC/9 E678-11U/ 1250 0.01 80 120 R6353 Low dark current bialkali photocathode 185 to 680 400 LBA U 1 CC/9 E678-11U/ 1250 0.01 30 70 R6354 For UV range 160 to 320 230 Cs-Te Q 2 CC/9 E678-11U/ 1250 0.01 — — R6355 For UV to near IR range, 185 to 850 general purpose 530 MA U 1 CC/9 E678-11U/ 1250 0.01 80 150 R6356 High sensitivity variant of R6355 185 to 900 600 MA U 1 CC/9 E678-11U/ 1250 0.01 140 250 R6357 * High sensitivity variant of R6356, Meshless type 185 to 900 450 MA U 1 CC/9 E678-11U/ 1250 0.01 350 500 R6358 Low dark current variant of R6356 185 to 830 530 LMA U 1 CC/9 E678-11U/ 1250 0.01 140 200 * Achieved the higher photocathode sensitivity by eliminating the mesh in front of the photocathode. It also features no output variation, disturbed by the mesh, when the incident light spot to the photocathode is small. NOTE Window materials Photocathode materials Q: Synthetic silica BA: Bialkali U: UV glass LBA: Low dark current bialkali MA: Multialkali LMA: Low dark current multialkali See optional accessories Dynode structure CC: Circular-cage Averaged over any interval of 30 seconds maximum. Figure 1: Typical Spectral Response of Cs-Te Outline No. See Fig. 9 The maximum ambient temperature range is -80 to +50°C. Figure 2: Typical Spectral Response of BA, LBA, Sb-Cs TPMSB0128EA TPMSB0114EA 100 100 10 1 QUANTUM EFFICIENCY 0.1 CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) R6352 CATHODE RADIANT SENSITIVITY 10 R6350, R6351 R6353 1 R6351 0.1 RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 WAVELENGTH (nm) 500 0.01 100 200 300 400 500 600 WAVELENGTH (nm) 700 800 Anode Characteristics Anode to Anode Dark Anode Sensitivity Current Blue Red/ Current Cathode Luminous (5-58) White Radiant Supply Amplifi- (After 30 min.) Radiant Typ. Ratio Typ. Voltage Min. Typ. cation Typ. Typ. Max. Typ. Typ. (mA/W) (Vdc) (A/lm) (A/lm) (µA/lm-b) (nm) (nA) (nA) Cathode Sensitivity Time Response Rise Electron Time Transit Time Typ. Typ. (ns) (ns) Notes Type No. 5 — 48 1000 50 300 3.6 × 105 7.5 × 106 0.5 5 1.4 15 Photon counting type: R6350 R6350P: 10cps Typ. 5 — 48 1000 50 300 3.6 × 105 7.5 × 106 0.5 5 1.4 15 R6351 10 — 90 1000 100 700 5.2 × 105 5.8 × 106 1 10 1.4 15 R6352 6.5 — 65 1000 100 400 3.7 × 105 5.7 × 106 0.1 2 1.4 15 Photon counting type: R6353 R6353P: 10cps Typ. — — 62 1000 — — 1.8 × 105 3 × 106 0.5 5 1.4 15 R6354 6 0.15 45 1000 100 600 1.8 × 105 4 × 106 1 10 1.4 15 R6355 7 0.3 60 1000 400 2500 6 × 105 1 × 107 1 10 1.4 15 R6356 13 0.4 105 1000 1000 2000 4.2 × 105 4 × 106 2 10 1.4 15 R6357 * 7.5 0.15 70 1000 300 2.5 × 105 3.5 × 106 0.1 1 1.4 15 700 Measured using red filter Toshiba R-68. Measured at the peak wavelength. : at 254nm Photon counting type: R6358 R6358P: 20cps Typ. Refer to Note . Anode characteristics are measured with the supply voltage and voltage distribution ratio specified by Note . Voltage distribution ratio and voltage. Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 P Distribution Ratio 1 1 1 1 1 1 1 1 1 1 Supply Voltage: 1000Vdc, K: Cathode, Dy: Dynode, P: Anode Figure 3: Typical Spectral Response of MA, LMA Figure 4: Typical Spectral Response of High Sensitivity MA TPMSB0115EA TPMSB0116EA 1000 R6358 10 R6355 1 0.1 WAVELENGTH (nm) R6357 100 10 R6356 1 0.1 RADIANT SENSITIVITY QUANTUM EFFICIENCY RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 100 800 900 1000 0.01 100 200 300 400 500 600 700 WAVELENGTH (nm) 800 900 1000 Figure 5: Typical Current Amplification 108 Figure 6: Typical Time Response TPMSB0117EA 100 TPMSB0118EA 107 R6356 TIME (ns) GAIN 106 R6350 105 TRANSIT TIME 10 104 RISE TIME 103 102 250 300 500 700 1000 1 500 1500 2000 1000 SUPPLY VOLTAGE (V) Figure 8: Typical Anode Uniformity TPMSB0119EA INSULATOR BASE PIN TOP VIEW 10-13 BULB R6353 PHOTOCATHODE MESH R6357: MESHLESS TYPE 10-14 R6350 10-15 R6357 10-16 10-17 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) ANODE RELATIVE OUTPUT (%) EQUIVALENT NOISE INPUT (W) 2000 SUPPLY VOLTAGE (V) Figure 7: Typical ENI Characteristics 10-12 1500 100 50 3.7mm 0 2 LEFT 1 0 1 2 (mm) RIGHT TPMSC0036EA Figure 9: Dimensional Outline and Basing Diagram (Unit: mm) Outline No.1 Outline No.2 13.5 ± 0.8 13.5 ± 0.8 PHOTOCATHODE 4MIN. 4MIN. PHOTOCATHODE DY5 6 DY6 7 7±2 8 DY7 9 DY8 52MAX. DY3 4 42 ± 2 24.0 ± 1.5 13MIN. 40 ± 2 50MAX. 24.0 ± 1.5 13MIN. 3±2 DY4 5 DY2 10 DY9 3 11 P 2 DY1 1 K DIRECTION OF LIGHT BOTTOM VIEW UV WINDOW QUARTZ WINDOW TPMSA0034EB Socket E678-11U E678-11T (Option): For direct soldering to PC board 24 12.4 5.5 5.5 45 30 ° ° 18 ° 30 DIRECTION OF LIGHT 13 10.5 3 10.5 4 0.5 3 2.7 12.4 0.5 11 11 TACCA0181EA TACCA0161EA Remaining Hamamatsu Photonics 1/2" side on PMT anode cap types and compact types will be discontinued by the year 2000. We recommend the new compact types instead of those current in use. Correlation among anode cap type, current compact type and new compact type TYPE/GRADE Sb-Cs/UV Sb-Cs/Q BA/UV HIGH LBA/UV MA/UV MA/UV HIGH MA/UV HIGH LMA/UV Cs-Te/Q ANODE CAP TYPE R300/R444 R306 — — R889 — — — R427 CURRENT COMPACT TYPE R1414/R1413 R1656 R5785 R2371 R1547/R1546 R3823 R3823-03 R4457 R1657 NOTE UV: UV WINDOW, Q: QUARTZ WINDOW, HIGH: HIGH SENSITIVITY NEW COMPACT TYPE R6350 R6351 R6352 R6353 R6355 R6356 R6357 R6358 R6354 NEW COMPACT TYPE PMT SERIES Optional Accessories D-Type Socket Assembly Ground Potential Electrode Type No. E850-13 Supply Voltage between Case and Pins (Vdc) Maximum Ratings Supply Voltage between Power Supply Terminals (Vdc) Voltage Divider Current (mA) Max. (A) 1500 1250 0.38 5 × 10-10 Anode Leakage Current in Signal Total Voltage Divider Resistance Signal Output (MΩ) Maximum Linear Output in DC Mode (µA) 3.3 15 (at 1000V) DC/Pulse E850-22: with SHV, BNC connector NOTE Measured with the maximum supply voltage. Measured with a supply voltage of 1000V. The current at witch the output linearity is kept within ±5%. Operating temperature range -20 to +50°C. Supplied with a separate mounting flange. See below for assembled dimensions. Dimensional Outline and Circuit Diagram (Unit: mm) E850-13 Mounting Flange for E850-13 DY8 9 12.4 DY7 8 DY6 7 DY5 6 450 ± 10 10 35.0 ± 0.5 5 12.6 HOUSING (INSULATOR) POTTING COMPOUND R9 C2 R8 C1 POWER SUPPLY GND AWG 22 (BLACK) R7 R6 R5 DY4 5 DY3 4 DY2 3 DY1 K 2 1 2- 3.2 R1 R1 to R10 : 330kΩ C1 to C3 : 0.01µF 5 10 C3 R1 DY9 R10 36.0 ± 0.3 2.5 20° 14.0 ± 0.3 SIGNAL GND SIGNAL OUTPUT RG-174/U (BLACK) 5.0 ± 0.5 11 7.0 ± 0.3 0.5MAX. P SOCKET PIN No. 15.0 ± 0.3 PMT R4 R3 R2 R1 1 -HV AWG 22 (VIOLET) TACCA0096EA TACCA0097EB ! WARNING ~High Voltage~ The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments. HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384 North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95 TPMS1032E03 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 OCT. 1998 IP Printed in Japan (1000)