PT78ST100 Series 1.5 Amp Positive Step-Down Integrated Switching Regulator SLTS059A (Revised 6/30/2000) • • • • • • • Very Small Footprint High Efficiency > 85% Self-Contained Inductor Internal Short-Circuit Protection Over-Temperature Protection Fast Transient Response Wide Input Range The PT78ST100 is a series of wideinput range, 3-terminal regulators. Pin-Out Information Standard Application Vin 1 PT78ST100 C1 2 COM Function 1 Vin 2 GND 3 Vout Ordering Information PT78ST1 XX Y Vout 3 C2 Pin + COM C1 = Optional 1µF ceramic C2 = Required 100µF electrolytic Pkg Style 500 Specifications These ISRs have a maximum output current of 1.5 Amps and an output voltage that is laser trimmed to a variety of industry standard voltages. These 78 series regulators have excellent line and load regulation with internal short- circuit and over-temperature protection, and are offered in a variety of standard output voltages. These ISRs are very flexible and may be used in a wide variety of applications. Output Voltage Package Suffix 33 = 3.3 Volts 36 = 3.6 Volts 05 = 5.0 Volts 51 = 5.1 Volts 53 = 5.25 Volts 06 = 6.0 Volts 65 = 6.5 Volts 07 = 7.0 Volts 08 = 8.0 Volts 09 = 9.0 Volts 10 = 10.0 Volts 12 = 12.0 Volts 14 = 13.9 Volts 15 = 15.0 Volts V = Vertical Mount S = Surface Mount H = Horizontal Mount PT78ST100 SERIES Characteristics (Ta = 25°C unless noted) Symbols Conditions Min Typ Max Units Output Current Io Over Vin range 0.1* — 1.5 A Short Circuit Current Isc Vin = Vin min Input Voltage Range Vin 0.1 ≤ Io ≤ 1.5A Output Voltage Tolerance ∆Vo Over Vin range, Io=1.5A Line Regulation Regline Over Vin range — ±0.2 ±0.4 %Vo Load Regulation Regload 0.1 ≤ Io ≤ 1.5A — ±0.1 ±0.2 %Vo Vo Ripple/Noise Vn Vin= 9V, Io= 1.5A Vin= 16V, Io= 1.5A — 65 90 — mVpp mVpp Transient Response (with 100µF output cap) ttr 50% load change Vo over/undershoot — — 100 5 — — µSec %Vo Efficiency η Vin= 10V, Io= 1A Vin= 10V, Io= 1A Vin= 17V, Io= 1A — — — 80 85 90 — — — % % % Switching Frequency ƒo Over Vin range, Io=1.5A 600 650 700 kHz Absolute Maximum Operating Temperature Range Ta — -40 — +85 °C Recommended Operating Temperature Range Ta Free Air Convection, (40-60LFM) At Vin= 24V, Io=1.0A -40 — +80** °C Thermal Resistance θja Free Air Convection, (40-60LFM) — 45 — °C/W Storage Temperature Ts — -40 — +125 °C — 500 — G’s G’s grams Vo= 3.3V Vo= 5V Vo= 12V Ta = 0°C to +60°C Vo= 5V Vo= 12V Vo= 3.3V Vo= 5V Vo= 12V — 3.5 — Apk 9 9 16 — — — 26 38 38 V V V — ±1.0 ±2.0 %Vo Mechanical Shock — Per Mil-STD-883D, Method 2002.3 Mechanical Vibration — Per Mil-STD-883D, Method 2007.2, 20-2000 Hz, soldered in a PC board — 5 — Weight — — — 6.5 — *ISR will operate down to no load with reduced specifications. **See Thermal Derating chart. Note: The PT78ST100 Series requires a 100µF electrolytic or tantalum output capacitor for proper operation in all applications. For technical support and more information, see inside back cover or visit www.ti.com/powertrends Typical Characteristics PT78ST100 Series 1.5 Amp Positive Step-Down Integrated Switching Regulator PT78ST105, 5.0 VDC (See Note 1) Efficiency vs Output Current 100 100 90 90 80 Vin 9.0V 70 12.0V 15.0V 60 20.0V Efficiency - % Efficiency - % Efficiency vs Output Current PT78ST112, 12.0 VDC (See Note 1) (See Note 1) Efficiency vs Output Current 100 90 Efficiency - % PT78ST133, 3.3 VDC Vin 80 9.0V 12.0V 18.0V 24.0V 30.0V 38.0V 70 60 Vin 80 16.0V 18.0V 70 24.0V 30.0V 38.0V 60 26.0V 50 50 40 40 0 0.25 0.5 0.75 1 1.25 1.5 50 40 0 0.25 0.5 Iout-(Amps) 0.75 1 1.25 0 1.5 Ripple vs Output Current Ripple vs Output Current 12.0V 40 9.0V 90 60 0 0 0.75 1 1.25 0.25 0.5 Iout-(Amps) Thermal Derating (Ta) 150 30.0V 24.0V 18.0V 100 16.0V 50 0 0 1.5 Vin 38.0V 30 20 0.75 1 1.25 1.5 0 0.25 0.5 0.75 Thermal Derating (Ta) (See Note 2) 1 1.25 1.5 Iout-(Amps) Iout-(Amps) 1.6 1.5 200 38.0V 30.0V 24.0V 18.0V 12.0V 9.0V Ripple-(mV) 15.0V Ripple-(mV) Ripple-(mV) 20.0V 1.25 250 Vin 26.0V 60 1 Ripple vs Output Current Vin 0.5 0.75 300 120 80 0.25 0.5 Iout-(Amps) 150 100 0 0.25 Iout-(Amps) Thermal Derating (Ta) (See Note 2) (See Note 2) 1.6 1.6 60°C 1.4 Iout-(Amps) 1.2 85°C 1 0.8 0.6 1.4 1.2 70°C Iout-(Amps) 70°C 1.2 Iout-(Amps) 60°C 1.4 1 85°C 0.8 0.6 0.4 70°C 60°C 85°C 1 0.8 0.6 0.4 0.4 0.2 0.2 0.2 0 0 9 0 9 13 17 21 12 15 18 21 24 27 30 33 36 39 16 19 22 25 28 31 34 37 40 25 Vin-(Volts) Vin-(Volts) Power Dissipation vs Output Current Vin-(Volts) Power Dissipation vs Output Current 1.8 Power Dissipation vs Output Current 3 2.5 1.6 2.5 2 1.4 26.0V 20.0V 1 15.0V 0.8 12.0V 0.6 9.0V 0.4 38.0V 30.0V 24.0V 18.0V 12.0V 9.0V 1.5 1 PD-(Watts) 1.2 Vin PD-(Watts) PD-(Watts) Vin 2 Vin 1.5 38.0V 1 30.0V 24.0V 18.0V 16.0V 0.5 0.5 0.2 0 0 0 0 0.25 0.5 0.75 1 Iout-(Amps) 1.25 1.5 0 0 0.25 0.5 0.75 1 1.25 0.25 0.5 0.75 1 1.25 1.5 1.5 Iout-(Amps) Iout-(Amps) Note 1: All data listed in the above graphs, except for derating data, has been developed from actual products tested at 25°C. This data is considered typical data for the ISR. Note 2: Thermal derating graphs are developed in free air convection cooling of 40-60 LFM. (See Thermal Application Notes.) For technical support and more information, see inside back cover or visit www.ti.com/powertrends I MPORTANT NOTI CE Te xas Instrume nts and its subsidiarie s (TI) re se rve the right to make change s to the ir products or to discontinue any product or se rvice without notice , and advise custome rs to obtain the late st ve rsion of re le vant information to ve rify, be fore placing orde rs, that information be ing re lie d on is curre nt and comple te . All products are sold subje ct to the te rms and conditions of sale supplie d at the time of orde r acknowle dgme nt, including those pe rtaining to warranty, pate nt infringe me nt, and limitation of liability. TI warrants pe rformance of its se miconductor products to the spe cifications applicable at the time of sale in accordance with TI’s standard warranty. Te sting and othe r quality control te chnique s are utilize d to the e xte nt TI de e ms ne ce ssary to support this warranty. Spe cific te sting of all parame te rs of e ach de vice is not ne ce ssarily pe rforme d, e xce pt those mandate d by gove rnme nt re quire me nts. Custome rs are re sponsible for the ir applications using TI compone nts. In orde r to minimize risks associate d with the custome r’s applications, ade quate de sign and ope rating safe guards must be provide d by the custome r to minimize inhe re nt or proce dural hazards. TI assume s no liability for applications assistance or custome r product de sign. TI doe s not warrant or re pre se nt that any lice nse , e ithe r e xpre ss or implie d, is grante d unde r any pate nt right, copyright, mask work right, or othe r inte lle ctual prope rty right of TI cove ring or re lating to any combination, machine , or proce ss in which such se miconductor products or se rvice s might be or are use d. TI’s publication of information re garding any third party’s products or se rvice s doe s not constitute TI’s approval, warranty or e ndorse me nt the re of. Copyright 2000, Te xas Instrume nts Incorporate d PACKAGE OPTION ADDENDUM www.ti.com 13-Oct-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty PT78ST105H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST105S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST105ST ACTIVE SIP MOD ULE EFC 3 200 TBD Call TI Level-1-215C-UNLIM PT78ST105U NRND SIP MOD ULE EFU 3 TBD Call TI Call TI PT78ST105V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST106H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST106S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST106ST ACTIVE SIP MOD ULE EFC 3 200 TBD Call TI Level-1-215C-UNLIM PT78ST106V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST107H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST107S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST107ST ACTIVE SIP MOD ULE EFC 3 200 TBD Call TI Level-1-215C-UNLIM PT78ST108H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST108S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST108V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST109H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST109S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST109V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST110H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST110S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST110V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST112H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST112S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST112ST ACTIVE SIP MOD ULE EFC 3 200 TBD Call TI Level-1-215C-UNLIM PT78ST112T ACTIVE SIP MOD ULE EFT 3 25 TBD Call TI Level-1-215C-UNLIM Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 13-Oct-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty PT78ST112V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST114H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST114S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST114V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST115H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST115S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST115ST ACTIVE SIP MOD ULE EFC 3 200 TBD Call TI Level-1-215C-UNLIM PT78ST115V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST133H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST133S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST133ST ACTIVE SIP MOD ULE EFC 3 200 TBD Call TI Level-1-215C-UNLIM PT78ST133V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST136H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST136S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST151H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST151S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST151V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST153H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST153S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST153V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST165H ACTIVE SIP MOD ULE EFA 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST165S ACTIVE SIP MOD ULE EFC 3 25 TBD Call TI Level-1-215C-UNLIM PT78ST165V ACTIVE SIP MOD ULE EFD 3 25 TBD Call TI Level-1-215C-UNLIM (1) Lead/Ball Finish MSL Peak Temp (3) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 13-Oct-2005 OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated