DATA SHEET NEC's 4.8 TO 5.85 GHz UPG2022T5G HIGH POWER GaAs MMIC SPDT SWITCH FEATURES DESCRIPTION • NEC's UPG2022T5G is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion loss. It is housed in a 6-pin plastic SON package. OPERATING FREQUENCY: f = 4.8 to 5.85 GHz • LOW INSERTION LOSS: 0.8 dB TYP. @ f = 4.9 GHz 0.7 dB TYP. @ f = 5.2 GHz 0.8 dB TYP. @ f = 5.8 GHz • APPLICATIONS POWER HANDLING: Pin (0.1 dB) = +31 dBm TYP. @ f = 4.8 to 5.85 GHz • • 5 GHz BAND WLAN CONTROL VOLTAGE: • 5 GHz CORDLESS PHONES Vcont = +2.8 V/0 V • • 5 GHz ELECTRONIC TOLL COLLECTION HIGH ISOLATION: (Between INPUT and OUTPUT) = 23 dB TYP. @ f = 5.2 GHz • 5 GHz FIXED WIRELESS ACCESS (Between OUTPUT1 and OUTPUT2) = 22 dB TYP. @ f = 5.2 • INPUT/OUTPUT RETURN LOSS: 10 dB MIN. @ f = 4.8 to 5.85 GHz • SWITCHING SPEED: 20 ns @ tRISE/tFALL (10/90% RF) • 6-PIN PLASTIC SON PACKAGE: (2.0 × 3.0 × 0.75 mm) • LEAD FREE ORDERING INFORMATION PART NUMBER UPG2022T5G-E1-A PACKAGE 6-pin plastic SON MARKING G4H SUPPLYING FORM • Embossed tape 8 mm wide • Pin 1 face the perforation side of the tape • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2022T5G California Eastern Laboratories UPG2022T5G PIN CONNECTIONS (Top View) 1 G4H 2 3 (Bottom View) 6 6 1 5 5 2 4 4 3 PIN NO. PIN NAME 1 OUTPUT1 2 GND 3 OUTPUT2 4 Vcont2 5 INPUT 6 Vcont1 ABSOLUTE MAXIMUM RATINGS (TA =+25ºC, unless otherwise specified) PARAMETER Switch Control Voltage SYMBOL RATINGS Vcont −6.0 to +6.0 UNIT Note V Input Power Pin +36 dBm Operating Ambient Temperature TA −45 to +85 °C Storage Temperature Tstg −55 to +150 °C Notes | Vcont1 − Vcont2 | ≤ 6.0 V RECOMMENDED OPERATING RANGE (TA =+25ºC, unless otherwise specified) SYMBOL MIN. TYP. MAX. UNIT Switch Control Voltage (H) PARAMETER Vcont (H) 2.7 2.8 3.3 V Switch Control Voltage (L) Vcont (L) −0.2 0 f 4.8 TA −40 Operating Frequency Operating Ambient Temperature +25 0.2 V 5.85 GHz +85 °C UPG2022T5G ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8 V/0 V, ZO = 50 Ω, DC blocking capacitors = 27 pF, Each port, unless otherwise specified) PARAMETER Insertion Loss SYMBOL LINS Isolation 1 (between OUTPUT1 and OUTPUT2) ISL1 Input Return Loss RLin Output Return Loss 0.1 dB Gain Compression Input Power RLout Pin (0.1 dB) Switching Control Speed tSW Switching Control Current Icont TEST CONDITIONS MIN. TYP. MAX. UNIT f = 4.9 GHz − 0.8 1.1 dB f = 5.2 GHz − 0.7 1.1 dB f = 5.8 GHz − 0.8 1.1 dB f = 4.9 GHz 13 18 − dB f = 5.2 GHz 15 22 − dB f = 5.8 GHz 15 20 − dB f = 4.9 GHz 10 22 − dB f = 5.2 GHz 10 29 − dB f = 5.8 GHz 10 19 − dB f = 4.9 GHz 10 21 − dB f = 5.2 GHz 10 29 − dB dB f = 5.8 GHz 10 20 − f = 4.9 to 5.8 GHz 30 31 − dBm tRISE/tFALL (10/90% RF) − 20 − ns − 0.5 1 μA STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25°C, Vcont = 2.8 V/0 V, ZO = 50 Ω, DC blocking capacitors = 27 pF, Each port, unless otherwise specified) PARAMETER Isolation 2 (between INPUT and OUTPUT) SYMBOL ISL2 TEST CONDITIONS MIN. TYP. MAX. UNIT f = 4.9 GHz − 18 − dB f = 5.2 GHz − 23 − dB f = 5.8 GHz − 21 − dB UPG2022T5G EVALUATION CIRCUIT Vcont1 INPUT Vcont2 27 pF 1 000 pF 1 000 pF 6 5 1 4 2 3 27 pF 27 pF OUTPUT1 OUTPUT2 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. TRUTH TABLE OF SWITCHING BY CONDITION OF CONTROL VOLTAGE VCONT1 VCONT (H) VCONT2 VCONT (H) VCONT (L) Note OUTPUT1 OUTPUT1 INPUT INPUT OUTPUT2 OUTPUT2 VCONT (L) Note OUTPUT1 INPUT OUTPUT1 INPUT OUTPUT2 OUTPUT2 Note In case of VCONT1 = VCONT2 = High or VCONT1 = VCONT2 = Low, (that is same control voltage for both pins), input signal of INPUT (Pin 5) is output from OUTPUT1 (Pin 1) and OUTPUT2 (Pin 3). UPG2022T5G PACKAGE DIMENSIONS 6-PIN PLASTIC SON (UNIT:mm) 0.75±0.1 3.0 2.0 (Bottom View) 0.7±0.1 0.7±0.1 0.35+0.07 -0.05 0.95 0.95 0.19 0.25+0.07 -0.05 0.29±0.1 0.29±0.1 UPG2022T5G RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220°C or higher Preheating time at 120 to 180°C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 260°C or below : 10 seconds or less : 60 seconds or less : 120±30 seconds : 3 times : 0.2%(Wt.) or below IR260 VPS Peak temperature (package surface temperature) Time at temperature of 200°C or higher Preheating time at 120 to 150°C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 215°C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below VP215 Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) : 260°C or below : 10 seconds or less : 120°C or below : 1 time : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 350°C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 Caution Do not use different soldering methods together (except for partial heating). Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 05/18/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.