MLO 36 MMO 36 AC Controller Modules VRSM VDSM VRRM VDRM V V 1200 1200 1600 1600 IRMS = 39 A VRRM = 1200-1600 V MLO Type MMO G1 K1 MLO 36-12io1 MLO 36-16io1 IRMS ITRMS ITAVM TK = 85°C, 50 - 400 Hz (for single controller) TVJ = TVJM TK = 85°C; (180° sine) ITSM TVJ = 45°C; VR = 0 PGM K1 MMO 36-12io1 MMO 36-16io1 Test Conditions (dv/dt)cr G1 G2 Symbol (di/dt)cr K2 G1 K1 K2 I2t MMO 36 K2 G2 Maximum Ratings 39 28 18 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 360 390 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 320 350 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 645 630 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 510 510 A2s A2s TVJ = TVJM repetitive, IT = 150 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.3 A non repetitive, IT = ITAVM diG/dt = 0.3 A/ms 100 A/ms 500 A/ms Features Thyristor controller for AC (circuit W1C acc. to IEC) for mains frequency Direct copper bonded Al2O3 -ceramic base plate Isolation voltage 3600 V~ Planar passivated chips UL registered, E 72873 Long wire leads suitable for PC board soldering ● ● ● ● ● 1000 V/ms ● 10 5 0.5 PGAVM W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s Md Mounting torque (M3) (UNF 4-32) Weight typ. Applications Switching and control of single and three phase AC Softstart AC motor controller Solid state switches Light and temperature control ● tp = 30 ms tp = 300 ms VISOL ● ● TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM K1 = Cathode 1, G1 = Gate 1 K2 = Cathode 2, G2 = Gate 2 (MLO 36 has no G2 lead) 0.7 ± 0.1 6 ± 0.9 15 ● Advantages Easy to mount with two screws Space and weight savings Improved temperature and power cycling High power density ● ● ● ● Nm lb.in. g Data according to IEC 60747 and to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 1-3 MLO 36 MMO 36 Symbol Test Conditions IR, ID TVJ = TVJM; VR = VRRM; VD = VDRM £ 5 VT IT £ 1.49 V VT0 rT For power-loss calculations only 0.85 15 V mW VGT VD = 6 V; 1.0 1.15 65 120 V V mA mA IGT Characteristic Values = 45 A; TVJ = 25°C VD = 6 V; £ £ £ £ TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C mA IGM tp = 50 ms, f = 60 Hz, IT = ITAVM VGD IGD TVJ = TVJM; VD = 2/3 VDRM £ £ 0.2 1 V mA IL TVJ = 25°C; tP = 10 ms, VD = 6 V IG = 0.3 A; diG/dt = 0.3 A/ms £ 150 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ £ 100 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/ms £ 2 ms TVJ = TVJM; IT = 11 A, tP = 200 ms; -di/dt = 10 A/ms VR = 100 V; dv/dt = 10 V/ms; VD = 2/3 VDRM typ. tq RthJC RthJK dS dA a per per per per 6 10 1: IGT, TVJ = 125°C 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C V VG 6 1 2 Creeping distance on surface Creepage distance in air Max. allowable acceleration 150 5 4 1 A 4: PGAV = 0.5 W 5: PGM = 1 W 6: PGM = 10 W IGD, TVJ = 125°C 0.1 1 10 100 1000 IG ms 1.3 0.65 1.5 0.75 K/W K/W K/W K/W 6 6 50 mm mm m/s2 mA Fig. 1 Gate trigger characteristics 1000 thyristor/diode; DC current module thyristor/diode; DC current module TVJ = 25°C µs tgd 100 typ. Limit 10 1 10 Dimensions in mm (1 mm = 0.0394") MLO 36 3 100 mA 1000 IG MMO 36 Fig. 2 Gate trigger delay time 160 A TVJ = 125°C 140 TK = 85°C IRMS 120 100 80 60 40 20 0 0.01 MMO 36 MLO 36 0.1 s 1 10 t Fig. 3 Rated RMS current versus time (360° conduction) © 2000 IXYS All rights reserved 2-3 MLO 36 MMO 36 400 A 350 60 W 50 Hz 80 % VRRM 50 Ptot RthKA K/W 40 ITSM 300 0.9 1.8 3 4.5 7.5 10.5 30 250 TVJ = 45°C 200 150 20 TVJ = 125°C 100 Circuit W1 1 x MMO 36 1 x MLO 36 10 50 0 0 0 5 10 15 20 25 30 35 40 A 0 IRMS 25 50 75 ms 1000 100 Fig. 5 Surge overload current ITSM, IFSM: Crest value, t: duration 1000 180 W 160 VR = 0V TVJ = 45°C A2s Ptot140 RthKA K/W 0.3 0.6 1 1.5 2.5 3.5 120 100 80 I2t TVJ = 125°C 300 60 200 40 Circuit W3 3 x MMO 36 3 x MLO 36 20 100 0 0 5 10 15 20 25 30 35 40 A 0 IRMS 25 50 75 100 TA ms 10 1 125 °C 150 t Fig. 6 Load current capability for three phase AC controller: 3xMMO 36/MLO 36 2.0 1.6 ZthJK 10 t Fig. 4 Load current capability for single phase AC controller K/W 1 125 °C 150 100 TA Fig. 7 I2t versus time (1-10 ms) 30 Constants for ZthJK calculation: Rthi / (K/W) ti / (s) 1.2 0.017 0.04 1.143 0.3 0.008 0.019 0.16 0.98 0.8 ITAVM 25 DC 180° sin 120° 60° 30° 20 RthJK for various conduction angles d : 15 RthJK / (K/W) d: 10 1.5 1.557 1.579 1.603 1.616 DC 180° 120° 60° 30° 5 0.4 0.0 0.001 A 30° 60° 120° 180° DC 0 0.01 0.1 1 10 s t Fig. 8 Transient thermal impedance junction to heatsink (per thyristor or diode) © 2000 IXYS All rights reserved 100 0 25 50 75 100 125 °C TK Fig. 9 Maximum on-state current versus heatsink temperature 3-3