1.6x1.5mm BI-COLOR SMD CHIP LED LAMP APTB1615SRSGWPR Features Description z1.6mmx1.5mm zBI SMT LED, 0.7mm THICKNESS. -COLOR,LOW POWER CONSUMPTION. zWIDE zIDEAL The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. VIEWING ANGLE. The Super Bright Green source color devices are made FOR BACKLIGHT AND INDICATOR. with Gallium Phosphide Green Light Emitting Diode. zVARIOUS COLORS AND LENS TYPES AVAILABLE. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. SPEC NO: DSAA0437 REV NO: V.1 DATE: MAR/21/2001 PAGE: 1 OF 5 Selection Guide Par t No . Di c e SUPER BRIGHT RED (GaAlAs) APTB1615SRSGWPR Iv (mc d ) @ 20 mA L en s Ty p e SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED View in g An g l e Min . Ty p . 30 80 3 12 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter Dev ic e λpeak Peak Wavelength Super Bright Red Super Bright Green ∆λ1/2 Spectral Line Halfwidth C Ty p . Max . Un i t s Tes t Co n d itio n s 660 565 nm IF=20mA Super Bright Red Super Bright Green 20 30 nm IF=20mA Capacitance Super Bright Red Super Bright Green 95 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red Super Bright Green 1.85 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Par ameter Su p er B r ig h t Red Su p er B r ig h t Gr een Un i t s Power dissipation 100 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 150 150 mA 5 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Soldering Temperature [2] 260°C For 5 Seconds Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA0437 REV NO: V.1 DATE: MAR/21/2001 PAGE: 2 OF 5 Super Bright Red / Super Bright Green APTB1615SRSGWPR SPEC NO: DSAA0437 REV NO: V.1 DATE: MAR/21/2001 PAGE: 3 OF 5 APTB1615SRSGWPR SMT Reflow Soldering Instructions APTB1615SRSGWPR Recommended Soldering Pattern (Units : mm) SPEC NO: DSAA0437 REV NO: V.1 DATE: MAR/21/2001 PAGE: 4 OF 5 APTB1615SRSGWPR Tape Specifications (Units : mm) SPEC NO: DSAA0437 REV NO: V.1 DATE: MAR/21/2001 PAGE: 5 OF 5