2.0x1.2mm SMD CHIP LED LAMP KP-2012SEC Features SUPER BRIGHT ORANGE Description !2.0mmx1.2mm SMT LED,1.1mm THICKNESS. The Super Bright Orange source color devices are !LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. made with DH InGaAlP on GaAs substrate Light !IDEAL FOR BACKLIGHT AND INDICATOR. Emitting Diode. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. ! PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. D i g i t a l l y s i g n e d b y Y A N G S H O U F E N c n = Y A N G S H O U F E N , o u = K I N G B R I H G T , o = 4 2 , c = U S D a t e : 2 0 0 2 . 0 2 . 2 3 1 6 : 3 4 : 0 9 + 0 8 '0 0 'R e a s o n : D o c u m e n t i s c e r t i f i e d SPEC NO: KDA0085 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: FEB/23/2002 DRAWN: J.X.FU PAGE: 1 OF 4 Selection Guide Par t No . Dic e KP-2012SEC Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT ORANGE ( InGaAlP ) V i ew i n g An g l e Min . Ty p . 2θ1/2 40 20 0 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e Ty p . λpeak Peak Wavelength Super Bright Orange λD Dominate Wavelength ∆λ1/2 Max . Un it s Tes t Co n d it io n s 6 10 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Halfwidth Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r Su p er B r ig h t Or an g e Un it s Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: KDA0085 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: FEB/23/2002 DRAWN: J.X.FU PAGE: 2 OF 4 Super Bright Orange KP-2012SEC SPEC NO: KDA0085 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: FEB/23/2002 DRAWN: J.X.FU PAGE: 3 OF 4 KP-2012SEC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0085 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: FEB/23/2002 DRAWN: J.X.FU PAGE: 4 OF 4