3.2mm x 1.6mm SMD CHIP LED LAMP KPT-3216SRC-PRV Features Description !3.2mmx1.6mm !LOW SUPER BRIGHT RED SMT LED, 0.75mm THICKNESS. The Super Bright Red source color devices are made POWER CONSUMPTION. !WIDE with Gallium Aluminum Arsenide Red Light Emitting Diode. VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e KPT-3216SRC-PRV Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT RED (GaA|As ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 36 80 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e λpeak Peak Wavelength Super Bright Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un its Tes t Co n d it io n s 660 nm I F =20mA Super Bright Red 640 nm I F =20mA Spectral Line Half-width Super Bright Red 20 nm I F =20mA C Capacitance Super Bright Red 45 pF V F =0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V I F =20mA IR Reverse Current Super Bright Red 10 uA V R = 5V Absolute Maximum Ratings at TA=25°°C P ar am et er S u p er B r i g h t R ed Un its Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 2 OF 4 Super Bright Red SPEC NO: DSAA4462 APPROVED: J.Lu KPT-3216SRC-PRV REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 3 OF 4 KPT-3216SRC-PRV SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 4 OF 4