HIGH ISOLATION VOLTAGE HIGH COLLECTOR TO EMITTER VOLTAGE SOP MULTI OPTOCOUPLER PS2832-1,-4 PS2833-1,-4 FEATURES DESCRIPTION • HIGH COLLECTOR TO EMITTER VOLTAGE VCEO = 300 V : PS2832-1,-4 VCEO = 350 V : PS2833-1,-4 PS2832-1,-4 and PS2833-1,-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected phototransistor. The package is an SSOP (Super Small Out-Line Package) type for high density mounting applications. • SMALL THIN PACKAGE 4, 16-pin SOP, pin pitch 1.27 mm • HIGH ISOLATION VOLTAGE BV = 2500 Vr.m.s. APPLICATIONS • HIGH CURRENT TRANSFER RATIO CTR = 2000 % TYP • HYBRID IC • TAPING PRODUCT NUMBER PS2832-1-F3, F4, PS2833-1-F3, F4 PS2832-4-F3, F4, PS2833-4-F3, F4 • TELEPHONE / TELEGRAPH RECEIVER • FAX ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Coupled Transistor Diode SYMBOLS VF PS2832-1, -4, PS2833-1, -4 PARAMETERS UNITS Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA C Terminal Capacitance, V = 0, f = 1.0 MHz pF ICEO Collector to Emitter Current IF = 0 mA, VCE = 300 V nA CTR Current Transfer Ratio, (IC/IF) IF = 1 mA, VCE = 2 V % VCE(sat) Collector Saturation Voltage, IF = 1 mA, IC = 2 mA V MIN TYP MAX 1.2 1.4 5 15 400 400 2000 4500 1.0 1011 RI-O Isolation Resistance, Vin-out = 1.0 kVDC Ω CI-O Isolation Capacitance, V = 0, f = 1.0 MHz pF 0.4 tr Rise Time1, VCC = 5 V, IC = 10 mA, RL = 100 Ω µs 20 tf Fall Time1, VCC = 5 V, IC = 10 mA, RL = 100 Ω µs 5 1. Test Circuit for Switching Time VCC PULSE INPUT = 1 ms ( PW Duty Cycle = 1/10 ) IF 50 Ω Vout RL = 100 Ω California Eastern Laboratories PS2832-1, -4, PS2833-1, -4 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR ∆PD/°C PD IF(Peak) PARAMETERS UNITS RATINGS PS2833-1 PS2832-4 50 6 PS2832-1 Transistor VCEO VECO IC ∆PC/°C PC Coupled BV TA TSTG Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current PW = 100 µs, Duty Cycle 1% mA V mW/°C mW/Ch A Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation V V mA/Ch mW/°C mW/Ch Isolation Voltage2 Operating Ambient Temp. Storage Temperature 0.6 60 PS2833-4 0.8 80 1 300 350 300 350 0.3 60 1.2 120 Vr.m.s. °C °C 2500 -55 to +100 -55 to +150 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS2832-1 PS2833-1 PS2832-4 PS2833-4 4 2.7±0.3 1. 2. 3. 4. 3 1 1 3 4 5 6 7 8 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 1.3 0.1 ± 0.1 0.12 M 2 Anode Cathode Emitter Collector 8 7.0 ± 0.3 4.4 +0.10 0.15 -0.05 1.27 0.4 ± 0.10 9 2 1 0.5 ± 0.3 9 10.3±0.3 16 +0.3 +0.3 2.3 -0.2 7.0 ± 0.3 4.4 0.15+0.10 -0.05 2 0.1±0.1 1 Anode Cathode Emitter Collector 2 -0.2 2.0 4 16 15 14 13 12 11 10 3 1.27 +0.10 0.40 -0.05 0.63 MAX 0.12 M 1.3 0.5 ± 0.3 MARKING PS2832-1 PS2833-1 PS2832-4 PS2833-4 003 Assembly lot Last number of type No. 32/33 Country Assembled Type Number Assembly lot NEC PS2832-4 N 003 32 No. 1 pin mark N 0 03 Week Assembled 0 03 Week Assembled Year Assembled (Last 1 Digit) Year Assembled (last 1 digit) CTR Rank Code PS2832-1, -4, PS2833-1, -4 TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 80 Transistor Power Dissipation, PC (mW) Diode Power Dissipation, PD (mW) 100 PS2832-4 PS2833-4 0.8 mW/°C 60 PS2832-1 PS2833-1 0.6 mW/°C 40 20 0 25 50 75 120 100 PS2832-1, -4 PS2833-1, -4 80 60 1.2 mW/°C 40 20 100 0 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 100 Collector Current, IC (mA) TA = +100 °C +60 °C +25 °C 50 Forward Current, IF (mA) 25 10 5 0 °C -25 °C -50 °C 1 0.5 5 mA 3 mA 2 mA 50 1 mA 10 5 IF = 0.5 mA 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1 10.4 1.5 Forward Voltage,VF (V) 1.4 1.6 5 mA 3 mA 50 CTR = 1068 % 2290 % 4360 % 1000 100 10 1 -50 1.2 100 VCEO = 300 V 10,000 1.0 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Collector Current, IC (mA) Collector to Emitter Dark Current, ICEO (nA) 0.8 Collector Saturation Voltage, VCE(SAT) (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE 100,000 0.6 2 mA 1 mA 10 5 IF = 0.5 mA 1 -25 0 25 50 75 Ambient Temperature, TA (°C) 100 0 1 2 3 4 Collector to Emitter Voltage, VCE (V) 5 PS2832-1, -4, PS2833-1, -4 TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified) NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO vs. FORWARD CURRENT Normalized Current Transfer Ratio, CTR 1.4 4500 VCE = 2 V Current Transfer Ratio, CTR (%) 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25°C, IF = 1 mA, VCE = 2 V 0.2 0.0 -50 -25 0 25 50 75 4000 3500 3000 Sample A 2500 B C 2000 1500 1000 500 0 0.1 100 0.5 SWITCHING TIME vs. LOAD RESISTANCE VCC = 10, IC = 10 mA, CTR = 2300 % 100 tr tf td 10 10 40 IF = 1 mA TA = 25°C 1.0 ts CTR (Reliable Value) Switching Time, t(µs) 5 LONG TERM CTR DEGRADATION 1.2 1000 1 Forward Current, IF (mA) Ambient Temperature, TA (°C) 0.8 60°C 0.6 0.4 1 0.2 0.0 0.1 10 50 100 500 10 10 2 10 3 10 4 10 5 10 6 1000 Time (Hr) Load Resistance, RL (Ω) Remark: The graphs indicate nominal characteristics. ORDERING INFORMATION PART NUMBER PACKAGE PACKING STYLE PART NUMBER PACKAGE PACKING STYLE PS2832-1 4 pin SOP 50 pcs (Tape 50 pcs cut) PS2833-1 4 pin SOP 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel PS2833-1-F3 PS2832-1-F3 PS2832-1-F4 PS2832-4 PS2833-1-F4 16 pin SOP Magazine case 45 pcs PS2832-4-F3 Embossed Tape 2500 pcs/reel PS2832-4-F4 PS2832-1-V PS2832-1-V-F3 PS2832-4-V-F3 PS2832-4-V-F4 PS2833-4 16 pin SOP Magazine case 45 pcs PS2833-4-F3 Embossed Tape 2500 pcs/reel PS2833-4-F4 4 pin SOP 50 pcs (Tape 50 pcs cut) PS2833-1-V Embossed Tape 3500 pcs/reel PS2833-1-V-F3 PS2832-1-V-F4 PS2832-4-V Embossed Tape 3500 pcs/reel 4 pin SOP 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel PS2833-1-V-F4 16 pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel PS2833-4-V PS2833-4-V-F3 PS2833-4-V-F4 16 pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel PS2832-1, -4, PS2833-1, -4 TAPING SPECIFICATIONS (Units in mm) 7.5 ± 0.1 ø1.5 ± 0.1 1.55 ± 0.1 2.8 MAX 16.0 ± 0.3 2.0 ± 0.1 4.0 ± 0.1 1.75 ± 0.1 TAPE OUTLINE AND DIMENSIONS 7.55 ± 0.1 0.3 2.85 ± 0.1 2.3±0.1 4.0 ± 0.1 TAPE DIRECTION PS2832-1-F3 PS2833-1-F3 32 003 003 003 32 003 32 32 003 003 003 003 003 32 32 32 32 32 32 003 PS2832-1-F4 PS2833-1-F4 REEL OUTLINE DIMENSIONS 2.5 2.0 ± 0.5 R 1.0 φ100±5.0 φ330 φ13.0 ± 0.5 φ21.0 ± 0.8 +2.0 16.4- 0.0 Packing: 3500 pcs/Reel PS2832-1, -4, PS2833-1, -4 TAPING SPECIFICATIONS (Units in mm) 7.5 ± 0.1 4.0 ± 0.1 2.8 MAX 10.7 ± 0.1 1.55 ± 0.05 16.0 ± 0.3 2.0 ± 0.1 1.75 ± 0.1 TAPE OUTLINE AND DIMENSIONS 0.3 1.55 ± 0.1 8.3 ± 0.1 12.0 ± 0.1 TAPE DIRECTION PS2832-4-F3 PS2833-4-F3 PS2832-4-F4 PS2833-4-F4 REEL OUTLINE DIMENSIONS 2.5 2.0 ± 0.5 R 1.0 φ100±5.0 φ330 φ13.0 ± 0.5 φ21.0 ± 0.8 +2.0 16.4- 0.0 Packing: 2500 ppcs/reel PS2832-1, -4, PS2833-1, -4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 ˚C (package surface temperature) 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). Package Surface Temperature T (˚C) • Time of temperature higher than 210 ˚C (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature 260 ˚C or below (molten solder temperature) • Time 10 seconds or less • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). (3) Cautions • Fluxes Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process. CAUTIONS REGARDING NOISE Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at start-up, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 01/24/2002