PS7112-1A PS7112L-1A 6 PIN DIP SOLID STATE RELAY FEATURES DESCRIPTION • DESIGNED FOR AC/DC SWITCHING APPLICATIONS PS7112-1A and PS7112L-1A are solid state relays containing a GaAs LED on the light emitting side (input side) and MOSFETs on the output side. • IDEAL FOR ANALOG SIGNAL CONTROL APPLICATIONS • LOW LED OPERATING CURRENT: IF = 2 mA • LOW OFFSET VOLTAGE APPLICATIONS • SMALL PACKAGE: 6 Pin DIP • VOICE TELEPHONY • AUDIO EQUIPMENT • AUDIO INSTRUMENTATION ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER MOSFET Diode SYMBOLS UNITS VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA ILOFF Off-State Leakage Current, VD = 100 V µA COUT Output Capacitance, VD = 0 V, f = 1 MHz IFon MIN TYP MAX 1.2 1.4 5.0 0.03 1 57 LED On-state Current, IL = 200 mA mA 2.0 On-State Resistance, IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 200 mA, t ≤ 10 ms Ω 3.0 6.0 tON Turn-on Time IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms 0.1 0.4 tOFF Turn-off Time IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms 0.03 0.2 RI-O Isolation Resistance, VI-O = 1.0 kVDC Ω CI-O Isolation Capacitance, V = 0 V, f = 1 MHz pF RON1 RON2 Coupled PS7112-1A, PS7112L-1A PARAMETERS 109 1.1 Note: 1. Test Circuit for Switching Time: IF PulseInput VL Input 50% 0 VC = 5 V 6 5 4 1 2 3 90% VO monitor Input monitor PS7112-1A, PS7112L-1A Output Rin RL 10% tON tOFF California Eastern Laboratories PS7112-1A, PS7112L-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PD Coupled BV PT TOP TSTG PARAMETERS UNITS RATINGS mA V mW A 50 5 50 1 V 100 mA 200 250 400 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER Forward Current (DC) Reverse Voltage Power Dissipation Peak Foward Current2 Break Down Voltage Continuous Load Current3 Connection A Connection B Connection C Pulse Load Current4 (AC/DC Connection) Power Dissipation mA mW 400 560 VR.M.S. mW °C °C 1500 610 -40 to +80 -40 to +100 PS7112-1A,PS7112L-1A SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage UNITS mA V MIN TYP MAX 2 10 20 0 0.5 ORDERING INFORMATION PART NUMBER PACKAGE PACKING STYLE PS7112-1A 6-pin DIP Magazine case 50 pcs PS7112L-1A PS7112L-1A-E3 Embossed Tape 1000 pcs/reel PS7112L-1A-E4 Isolation Voltage5 Total Power Dissipation Operating Temperature Storage Temperature Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. Conditions: IF ≥ 2 mA. The following tupes of load connections are available: 6 Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 5 IL 4 6 5 IL VL (AC/DC) L L + _ VL (DC) 4 6 5 4 IL 6 5 IL L L _ + VL (DC) + _ VL (DC) IL + IL 4 IL 4. PW = 100 ms, 1 shot. 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS7112L-1A PS7112-1A 9.25±0.5 9.25±0.5 PIN CONNECTIONS 6 5 6 4 5 PIN CONNECTIONS 6 5 4 1 2 3 4 1. LED Anode 2. LED Cathodee 3. NC 1 1 2 2 3 3 4. MOSFET Drain 5. MOSFET Source 6. MOSFET Drain 3.3±0.3 4.15±0.3 3.5±0.3 7.62 6.5±0.5 0.5±0.1 1.34±0.1 0.25 M 6.5±0.5 3.5±0.3 1.34±0.1 0 to 15° 2.54 0.10+0.10 -0.05 2.54 0.9±0.25 9.60±0.4 PS7112-1A, PS7112L-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 200 150 100 50 0 -25 100 25 50 80 75 Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE 100 250 Output Capacitance, COUT (pF) 1.4 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1.0 1 mA 0.8 -25 0 25 50 75 f = 1 MHz 200 150 100 50 0 100 Ambient Temperature, TA (°C) 40 60 80 100 120 ON-STATE RESISTANCE DISTRIBUTION 3.0 30 Normalized to 1.0 at TA = 25 °C IF = 10 mA IL = 10 mA 2.5 n = 50 pcs IF =10 mA IL = 10 mA 25 Number (pcs) 2.0 1.5 1.0 0.5 0 -25 20 Supply Voltage, VCC (V) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE Normalized On-State Resistance, RON 0 Ambient Temperature, TA (°C) 1.6 Forward Voltage, VF (V) 250 20 15 10 5 0 25 50 75 Ambient Temperature, TA (°C) 100 0 2.8 2.9 3.0 On-State Resistance, RON (Ω) PS7112-1A, PS7112L-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 300 IF = 10 mA 10 -4 200 Load Current, IL (mA) Off-State Leakage Current, ILOFF (A) 10-3 10-5 TA = 80 °C 10-6 -7 10 TA = 25 °C 100 -1.5 -1.0 -0.5 0 0.5 1.5 -100 10 -8 -200 10 -9 0 20 40 60 80 -300 100 Supply Voltage, VCC (V) Load Voltage, VL (V) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 0.5 8.0 VO = 5 V Turn-off Time, tOFF (ms) VO = 5 V Turn-on Time, tON (ms) 1.0 6.0 4.0 2.0 0.4 0.3 0.2 0.1 0 10 20 30 40 0 20 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 30 n = 50 pcs IF = 10 mA VCC = 5 V RL = 500 Ω 25 20 15 10 n = 50 pcs IF = 10 mA VCC = 5 V RL = 500 Ω 25 Number (pcs) Number (pcs) 10 20 15 10 5 5 0 0 0.05 0.10 0.15 Turn-on Time, tON (ms) 0.02 0.06 Turn-off Time, tOFF (ms) 40 PS7112-1A, PS7112L-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 °C IF = 10 mA VCC = 5 V RL = 500 Ω 2.5 Normalized Turn-off Time, tOFF Normalized Turn-on Time, tON 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 2.5 2.0 1.5 1.0 0.5 0.0 -25 100 Normalized to 1.0 at TA = 25 °C IF = 10 mA VCC = 5 V RL = 500 Ω 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) TAPING SPECIFICATIONS (Units in mm) 2.0 ± 0.1 1.55 ± 0.1 4.0 ± 0.1 OUTLINE AND DIMENSIONS (REEL) 1.75 ± 0.1 OUTLINE AND DIMENSIONS (TAPE) 4.3 ± 0.2 φ330 10.3 ± 0.1 R 1.0 φ80.0 ± 5.0 φ13.0 ± 0.5 16.0 ± 0.3 7.5 ± 0.1 2.0 ± 0.5 φ21.0 ± 0.8 0.3 1.55 ± 0.1 10.4 ± 0.1 12.0 ± 0.1 +2.0 16.4- 0.0 Packaging : 1000 pcs/reel TAPING DIRECTION PS7112L-1A-E3 PS7112L-1A-E4 PS7112-1A, PS7112L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/27/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE