CM800HA-28H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Single IGBTMOD™ H-Series Module 800 Amperes/1400 Volts A B U - M4 THD (2 TYP.) R K P E M G B A S - M8 THD (2 TYP.) C E Q J C Description: Powerex IGBTMOD™ Modules are designed for use in switching applications. Each module consists of one IGBT Transistor in a single configuration with a reverseconnected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. G L H T - DIA. (4 TYP.) F N D E E C G E Outline Drawing and Circuit Diagram Dimensions Inches Millimeters Dimensions Inches Millimeters A 5.12 130.0 L 0.79 20.0 B 4.33±0.01 110.0±0.25 M 0.77 19.5 C 1.840 46.75 N 0.75 19.0 0.61 15.6 D 1.73±0.04/0.02 44.0±1.0/0.5 P E 1.46±0.04/0.02 37.0±1.0/0.5 Q 0.51 13.0 F 1.42 36.0 R 0.35 9.0 G 1.25 31.8 S M8 Metric M8 H 1.18 30.0 T 0.26 Dia. Dia. 6.5 J 1.10 28.0 U M4 Metric M4 K 1.08 27.5 Features: □ Low Drive Power □ Low VCE(sat) □ Discrete Super-Fast Recovery (135ns) Free-Wheel Diode □ High Frequency Operation (20-25kHz) □ Ysolated Baseplate for Easy Heat Sinking Applications: □ AC Motor Control □ Motion/Servo Control □ UPS □ Welding Power Supplies □ Laser Power Supplies Ordering Information: Example: Select the complete part module number you desire from the table below -i.e. CM800HA-28H is a 1400V (VCES), 800 Ampere Single IGBTMOD™ Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 800 28 1 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM800HA-28H Single IGBTMOD™ H-Series Module 800 Amperes/1400 Volts Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol CM800HA-28H Units Junction Temperature Tj –40 to +150 °C Storage Temperature Tstg –40 to +125 °C Collector-Emitter Voltage (G-E SHORT) VCES 1400 Volts Gate-Emitter Voltage VGES ±20 Volts IC 800 Amperes ICM 1600* Amperes Collector Current Peak Collector Current Diode Forward Current IF 800 Amperes Diode Forward Surge Current IFM 1600* Amperes Power Dissipation Pd 4800 Watts – 95 in-lb Max. Mounting Torque M8 Terminal Screws Max. Mounting Torque M6 Mounting Screws – 26 in-lb Max. Mounting Torque M4 G-E Terminal Screws – 13 in-lb – 1600 Grams VRMS 2500 Volts Module Weight (Typical) V Isolation * Pulse width and repetition rate should be such that device junction temperature does not exceed the device rating. Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Collector-Cutoff Current Symbol Test Conditions Min. Typ. Max. Units ICES VCE = VCES, VGE = 0V – – 5.0 mA IGES VGE = VGES, VCE = 0V – – 0.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 80mA, VCE = 10V 4.5 6.0 7.5 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 800A, VGE = 15V – 2.7 3.6 Volts IC = 800A, VGE = 15V, Tj = 150°C – 2.4 – Volts Total Gate Charge QG VCC = 600V, IC = 800A, VGS = 15V – 4590 – nC Diode Forward Voltage VFM IE = 800A, VGS = 0V – – 3.5 Volts Min. Typ. Max. Units – – 172 nF – – 60 nF Gate Leakage Current * Pulse width and repetition rate should be such that device junction temperature rise is negligible. Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Input Capacitance Cies Output Capacitance Coes Test Conditions VGE = 0V, VCE = 10V, f = 1MHz Reverse Transfer Capacitance Cres – – 35 nF Resistive td(on) – – 500 ns Turn-on Delay Time Load Rise Time Switching Turn-off Delay Time Times Fall Time tr VCC = 600V, IC = 800A, – – 1200 ns td(off) VGE1 = VGE2 = 15V, RG = 3.3Ω – – 1000 ns – – 350 ns Diode Reverse Recovery Time trr tf IE = 800A, diE/dt = –1600A/µs – – 250 ns Diode Reverse Recovery Charge Qrr IE = 800A, diE/dt = –1600A/µs – 6.3 – µC Test Conditions Min. Typ. Max. Units Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified 2 Characteristics Symbol Thermal Resistance, Junction to Case Rth(j-c) Per IGBT – – 0.026 °C/W Thermal Resistance, Junction to Case Rth(j-c) Per FWDi – – 0.058 °C/W Contact Thermal Resistance Rth(c-f) Per Module, Thermal Grease Applied – – 0.018 °C/W Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM800HA-28H Single IGBTMOD™ H-Series Module 800 Amperes/1400 Volts OUTPUT CHARACTERISTICS (TYPICAL) 1600 5 1600 13 Tj = 25°C VCE = 10V Tj = 25°C Tj = 125°C 12 15 VGE = 20V IC, (AMPERES) 11 800 10 800 3 2 400 400 9 7 1 8 0 0 0 2 4 6 8 10 0 0 4 8 12 16 20 0 400 800 VGE, (VOLTS) IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 104 103 Tj = 25°C VGE = 0V CAPACITANCE, Cies, Coes, Cres, (nF) IC = 1600A IE, (AMPERES) IC = 800A 4 102 2 IC = 320A 101 1.0 0 0 4 8 12 16 20 1.5 2.0 3.0 3.5 HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) 100 Cres 10-1 10-1 4.0 100 REVERSE RECOVERY TIME, t rr, (ns) 102 102 di/dt = -1600A/µsec Tj = 25°C 102 102 GATE CHARGE, VGE 103 Irr trr 101 101 101 VCE, (VOLTS) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 103 COLLECTOR CURRENT IC, (AMPERES) Coes 101 VEC, (VOLTS) VGE, (VOLTS) SWITCHING TIME, (ns) 2.5 Cies 102 103 EMITTER CURRENT, IE, (AMPERES) 101 104 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 6 103 REVERSE RECOVERY CURRENT, Irr, (AMPERES) 8 1600 1200 VCE, (VOLTS) 10 VCE(sat), (VOLTS) VGE = 15V Tj = 25°C Tj = 125°C 4 1200 VCE(sat), (VOLTS) 1200 IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) IC = 800A Tj = 25°C 16 VCC = 800V VCC = 600V 12 8 4 0 0 1500 3000 4500 6000 7500 GATE CHARGE, QG, (nC) 3 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 10-3 101 100 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) 10-2 10-1 100 10-1 10-1 10-2 10-2 10-3 10-5 TIME, (s) 4 101 Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 0.026°C/W 10-4 10-3 10-3 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) Zth = Rth • (NORMALIZED VALUE) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) Zth = Rth • (NORMALIZED VALUE) CM800HA-28H Single IGBTMOD™ H-Series Module 800 Amperes/1400 Volts 10-3 101 100 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-2 10-1 100 101 Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 0.58 °C/W 10-1 10-1 10-2 10-2 10-3 10-5 TIME, (s) 10-4 10-3 10-3