TRANSISTOR MODULE QCA100AA120 UL;E76102 （M） 15 （Applications） Motor Control（VVVF）, AC/DC Servo, UPS, Switching Power Supply, Ultrasonic Application 25.0 3-M6 L=10max AMP110 t=0.5 30.0max E1 B1 ■Maximum Ratings Unit：A （Tj＝25℃ unless otherwise specified） Item VCBO Collector-Base Voltage VCEX Collector-Emitter Voltage VEBO Emitter-Base Voltage −IC E1 B1 33.0max 24.0max C1 B1X IC B1X 14.0 B2 E2 E2 C1 B2 E2 25.0 B2X C2E1 Symbol E2 63.0max 15 C2E1 B2X 37.0max VCEX＝1200V saturation voltage for higher efficiency. ● High DC current gain hFE ● Isolated mounting base ● Low 4-φ6.5 7.57.56.06.0 ● IC＝100A, 108max 93±0.5 48±0.5 QCA100AA120 is a dual Darlington power transistor module which has seriesconnected high speed, high power Darlington transistors. Each transistor has a reverse paralleled fast recovery diode. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink construction, Conditions Ratings QCA100AA120 VBE＝−2V Unit 1200 V 1200 V 10 V Collector Current 100 A Reverse Collector Current 100 A IB Base Current PT Total power dissipation TC＝25℃ 5 A 800 W Tj Junction Temperature −40 to ＋150 ℃ Tstg Storage Temperature −40 to ＋125 ℃ VISO Isolation Voltage Mounting Torque 2500 V Mounting（M6） Recommended Value 2.5-3.9（25-40） 4.7（48） Terminal（M6） Recommended Value 2.5-3.9（25-40） 4.7（48） N･m (㎏f･B) 470 g Mass A.C.1minute Typical Value ■Electrical Characteristics Symbol Item Conditions ICBO Collector Cut-off Current VCB＝1200V IEBO Emitter Cut-off Current VEB＝10V VCEX（SUS） Collector Emitter Sustaning Voltage Ratings Min. Ic＝20A，IB2＝−4A 1200 75 Max. Unit 2.00 mA 600 mA V DC Current Gain Ic＝100A，VCE＝5V VCE(sat) Collector-Emitter Saturation Voltage Ic＝100A，IB＝2A 3.00 V VBE(sat) ton Base-Emitter Saturation Voltage Ic＝100A，IB＝2A 3.50 V hFE ts On Time Switching Time tf VECO Rth(j-c) Storage Time Fall Time 3.00 Vcc＝600V，Ic＝100A IB1＝2A，IB2＝−2A 15.00 3.00 Collector-Emitter Reverse Voltage −Ic＝100A 1.80 Thermal Impedance (junction to case) Transistor part 0.155 Diode part 0.65 SanRex μs V ℃/W ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] QCA100AA120 Collector-Emitter Voltage VＣＥ （V） Base-Emitter Voltage VBE（V） . Current Gain D.C. ２ Typical VCE 5V VCE 2.8V DC Current Gain hFE １０３ Tj 125℃ ５ Tj 25℃ ２ １０２ ５ ２ ０ １０ ５ ２ １ １０ ２ ２ １０ ５ Saturation Characteristics １０１ ５ VBE(sat) ２ １００ VCE(sat) Typical Tj 25℃ Tj 125℃ IB 2A ５ １００ ２ ２ ５ Forward Bias Safe Operating Area Collector Current Ic（A） s μ s 50 0μ s 0μ 20 ５ IB2 −2A IB2 −4A １００ １０１ ５ Tc 25℃ Non-Repetitive ２ １００ ５ １０２ ２ １０３ ５ ５０ Tj ０ ０ ２ Collector Current Derating Factor Collector Reverse Current -Ic（A） ６０ PT Limited ２０ ０ ０ ２０ ４０ ６０ ８０ １００ ６００ ８００ １０００ １２００ １４００ Forward Voltage of Free Wheeling Diode IS/B Limited ４０ ４００ Collector-Emitter Voltage VCE（V） １００ ８０ 125℃ ２００ Collector-Emitter Voltage VCE（V） Derating Factor（%） ２ １５０ ２ １２０ １４０ ２ １０２ ５ ２ １０１ ５ ２ Tj 25℃ Tj 150℃ Typical １００ ５ ０ １６０ ０． ５ １． ０ １． ５ ２． ０ Emitter-Collector Voltage VECO（V） Collector Current Vs Switching Time ２ ts １０１ ５ Transient Thermal Impedance θj-c（℃/W） Case Temperature（℃） Switching Time ton tf ts（μs） １０２ ５ ２００ 10 Collector Current Ic（A） Pulse Wide １０２ ２ Reverse Bias Safe Operating Area ２５０ ５ ２ １０１ Collector Current Ic（A） Collector Current Ic（A） ５ Maximum Transient Thermal Impedance Characteristics Max. ２ 1sec∼10sec 1msec∼1sec １０−１ ２ １００ ５ ２ tf Typical IB1 2A IB2 −2A Vcc 600V Tj 25℃ ton −１ １０ ０ ２０ ４０ ６０ ８０ Collector Current Ic（A） １００ １２０ ５ Junction to Case ２ １０−２ −３ １０ ２ ５ １０−２ １００ ２ ５ １０１ ２ ５ １０−１ ２ ５ １００ Time t（sec） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]