TRANSISTOR MODULE QCA150A/QBB150A40/60 UL;E76102 （M） 10.5 B2X B2 C2E1 NAME PLATE 5.0 E2 B1 C1 25.5 26.5 33.5max 4-φ5.4 QBB E2 40.0 52.0±0.2 68.0max B2 （1.5） 3.4 E2 E1 C2 B1 21 30max QCA （Applications） Motor Control（VVVF） , AC/DC Servo, UPS, Switching Power Supply, Ultrasonic Application （15.0） 32.0 110Tab 7 M5×10 C1 B1 X C1 （6.0） E2 （8.0） （4.0） B2 X C2 E1 （4.0） （2.0） ● 6-M5 （3.0） 15.8 15.8 15.8 15.8 15.8 4ｰφ5.5 B2 E2 E2 B2 62max 48±0.25 30 QCA150A…Series-connected type QBB150A…Separate Type ● IC＝150A, VCEX＝400/600V ● Low saturation voltage for higher efficiency. ● Isolated mounting base ● VEBO 10V for faster switching speed. 102.0max 63.0±0.2 95max 80±0.25 23 23 6 12 6 QCA150A and QBB150A is a dual Darlington power transistor module with two high speed, high power Darlington transistors. Each transistor has a reverse paralleled fast recovery diode. B2 C2 E1 B1 C1 Unit：A ■Maximum Ratings （Tj＝25℃ unless otherwise specified） Ratings Symbol Item Conditions VCBO Collector-Base Voltage VCEX Collector-Emitter Voltage VEBO Emitter-Base Voltage IC −IC VBE＝−2V QCA150A40 QCA150A60 QBB150A40 QBB150A60 Unit 400 600 V 400 600 V 10 （ ）pw≦1ms Collector Current 150（300） A 150 A Reverse Collector Current IB Base Current PT Total power dissipation V TC＝25℃ 9 A 690 W Tj Junction Temperature −40 to ＋150 ℃ Tstg Storage Temperature −40 to ＋125 ℃ VISO Isolation Voltage Mounting Torque Mass 2500 V Mounting（M5） A.C.1minute Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） QCA150A/QBB150A Recommended Value 1.5-2.5（15-25） 2.7（28） N･m (㎏f･B) Typical Value 370/340 g ■Electrical Characteristics Symbol Item Conditions Ratings Min. Max. Unit ICBO Collector Cut-off Current VCB＝VCBO 1.0 mA IEBO Emitter Cut-off Current VEB＝VEBO 500 mA VCEO（SUS） Collector Emitter Sustaning Voltage VCEX（SUS） QCA150A40 QBB150A40 QCA150A60 QBB150A60 QCA150A40 QBB150A40 QCA150A60 QBB150A60 300 V Ic＝1A 450 400 Ic＝30A，IB2＝−5A V 600 DC Current Gain Ic＝150A，VCE＝2V/5V VCE(sat) Collector-Emitter Saturation Voltage Ic＝150A，IB＝2.0A 2.0 V VBE(sat) Base-Emitter Saturation Voltage Ic＝150A，IB＝2.0A 2.5 V hFE ton ts On Time Switching Time tf VECO Rth(j-c) Storage Time Fall Time 2.0 Vcc＝300V，Ic＝150A IB1＝2A，IB2＝−2A Collector-Emitter Reverse Voltage −Ic＝150A Thermal Impedance (junction to case) Transistor part／Diode part SanRex 75/100 12.0 μs 3.0 1.4 V 0.18/0.6 ℃/W ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] QCA150A/QBB150A40/60 Collector-Emitter Voltage VＣＥ （V） Base-Emitter Voltage VBE（V） D.C. Current Gain １０３ DC Current Gain hFE ５ ２ ２ １０ ５ Tj Tj ２ １０１ 125℃ 25℃ VCE 5V VCE 2V Typical ５ １００ １０１ ５ ２ ２ １０２ ５ ２ Saturation Characteristics ６ Ic VCE VBE Tj 25℃ 150A Typical Ic 100A Ic 50A Ic ３ ２ １ １０−１ ２ ５ 1m s ２ Tc 25℃ Non-Reprtitive １０１ 10 ２５０ /B m Li ite d ２ QCA150 A60 QBB150 A60 QCA150 A40 QBB150 A40 １００ ５ １０２ ２ ５ Tj ０ ０ １０３ Collector Current Derating Factor Lim ited PT Lim ite d ５０ ２５ ７５ １００ １２５ １５０ Switching Time ton tf ts（μs） １ １０ ５ IB1 2A IB2 −2A tf ５ ４０ ６０ ８０ １００ １２０ Collector Current Ic（A） ５００ ４００ ６００ ７００ １０２ ５ ２ １０１ ５ Ｔ ｊ=２５℃ Maximum ２ １００ ５ ０． ５ １． ０ １． ５ ２． ０ ５ Maximum Transient Thermal Impedance Characteristics ２ Junction to Junction toCase Case Max. 50msec∼50sec ５ 100μsec∼50msec ２ １０−２ ton ２０ ３００ １０−１ ts ２ ０ Transient Thermal Impedance θj-c（℃/W） Collector Current Vs Switching Time １００ ２００ QCA150A60 QBB150A60 Emitter-Collector Voltage VECO（V） ２ Vcc 300V Tj 25℃ Typical １００ QCA150A40 QBB150A40 ２ Case Temperature（℃） ２ IB2 −5A Forward Voltage of Free Wheeling Diode Collector Reverse Current -Ic（A） Derating Factor（%） IS/B ７５ ５０ IB2 −2A IB2 −5A Collector-Emitter Voltage VCE（V） １００ ２５ IB2 −2A 125℃ ５０ Collector-Emitter Voltage VCE（V） ０ ０ ２ １５０ １００ １０１ １０１ ５ ２００ ２ ５ ２ ３００ 0μ s m s ５ ５ １００ ５ Reverse Bias Safe Operating Area Collector Current Ic（A） 50 ３５０ P 0μ uls s eW ide IS Collector Current Ic（A） ２ 10 １０２ 150A Base Current I（ B A） Forward Bias Safe Operating Area Lim ite d Ic ４ Collector Current Ic（A） PT 100A ５ ０ ５ ５ Ic 50A １４０ １６０ ５ ２ １００μ ２００μ ５００μ １ｍ ５０ｍ １００ｍ ２００ｍ ５００ｍ １ ２ｍ ５ｍ ２ ５ １０ｍ ２０ｍ １０ ２０ ５０ｍ ５０ Time t（sec） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]