Ordering number : ENN1429A 2SB922 / 2SD1238 PNP / NPN Epitaxial Planar Silicon Transistors 2SB922 / 2SD1238 Large Current Switching Applications Applications Package Dimensions Large current switching of relay drivers, high-speed inverters, converters. unit : mm 2022A [2SB922 / 2SD1238] Features 3.2 4.8 1.2 15.0 20.0 2.0 1.3 • Low collector-to-emitter saturation voltage : VCE(sat)=--0.5V (PNP), 0.4V (NPN) max. Wide ASO and highly resistant to breakdown. 2.6 • 15.6 14.0 3.5 • 1.6 20.0 2.0 0.6 1.0 5.45 2 3 1.4 1 0.6 1 : Base 2 : Collector 3 : Emitter 5.45 SANYO : TO-3PB Specifications ( ) : 2SB922 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--)120 Collector-to-Emitter Voltage VCEO (--)80 V Emitter-to-Base Voltage VEBO (--)6 V IC ICP PC (--)12 A Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Tj Storage Temperature Tstg V (--)20 A 80 W 150 °C --55 to +150 °C Tc=25°C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO Conditions Ratings min typ max VCB=(--)80V, IE=0 VEB=(--)4V, IC=0 Unit (--)0.1 mA (--)0.1 mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92502 TS IM 8-4747 No.1429-1/4 2SB922 / 2SD1238 Continued from preceding page. Parameter Symbol Ratings Conditions min typ hFE1 hFE2 VCE=(--)2V, IC=(--)1A 70* VCE=(--)2V, IC=(--)6A 30 Collector-to-Emitter Saturation Voltage fT VCE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO VCE=(--)5V, IC=(--)1A IC=(--)6A, IB=(--)0.6A IC=(--)1mA, IE=0 Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time V(BR)EBO ton tstg tf DC Current Gain Gain-Bandwidth Product Unit max 280* 20 MHz (--0.5)0.4 IC=(--)1mA, RBE=∞ IE=(--)1mA, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. V (--)120 V (--)80 V (--)6 V µs µs µs 0.2 (0.7)1.7 (0.1)0.2 *The 2SB922 / 2SD1238 are graded as follows by hFE at 1A : Rank Q R S hFE 70 to 140 100 to 200 140 to 280 Swicthing Time Test Circuit IB1 PW=20µs D.C.≤1% OUTPUT IB2 INPUT RB RL=10Ω VR 50Ω + 470µF + 100µF VBE= --5V VCC=50V IC=10IB1= --10IB2=5A For PNP, the polarity is reversed. IC -- VCE A 0m --10 Collector Current, IC -- A Collector Current, IC -- A 12 --50 mA 0 --20 --8 --6 --100mA --80mA --4 --40mA --20mA --2 0 --0.2 --0.4 --0.6 --0.8 --1.2 6 40mA 4 20mA --1.4 IB=0 0 0.2 0.4 2SB922 VCE= --2V --6 --4 --2 1.0 1.2 1.4 IT04449 2SD1238 VCE=2V 12 Collector Current, IC -- A --8 0.8 IC -- VBE 14 --10 0.6 Collector-to-Emitter Voltage, VCE -- V IT04448 IC -- VBE --12 Collector Current, IC -- A 100mA 80mA 8 0 --1.0 Collector-to-Emitter Voltage, VCE -- V --14 A 200m 10 2 IB=0 0 2SD1238 1A mA A --1 --12 IC -- VCE 14 2SB922 500 --14 10 8 6 4 2 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 --1.4 IT04450 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 1.4 IT04451 No.1429-2/4 2SB922 / 2SD1238 hFE -- IC 1000 2SB922 VCE= --2V 3 3 2 2 100 7 5 3 2 100 7 5 3 2 10 10 7 5 7 5 3 3 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- A 2 3 3 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector Current, IC -- A 3 IT04453 VCE(sat) -- IC 10 2SB922 2SD1238 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 IT04452 VCE(sat) -- IC --10 3 2 --1.0 5 3 2 =20 IC / IB --0.1 =10 IC / IB 5 3 3 2 1.0 5 3 2 0.1 3 2 --0.01 0.01 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector Current, IC -- A 3 3 2 3 =20 / IB =10 / IB IC 5 7 1.0 2 3 5 7 10 2 Collector Current, IC -- A 3 IT04455 ASO 3 2SB922 ICP= --20A 2 5 7 0.1 IT04454 ASO 3 IC 5 2 ICP=20A 2 2SD1238 IC=12A IC= --12A 10 3 2 --1.0 5 s 1m s 10m ms ion 100 rat ope 5 5 DC s 1m s 10m s m ion 100 rat ope Collector Current, IC -- A --10 DC Collector Current, IC -- A 2SD1238 VCE=2V 7 5 DC Current Gain, hFE DC Current Gain, hFE 7 5 3 2 1.0 5 3 3 2 2 0.1 --0.1 3 5 7 --1.0 2 3 5 7 --10 2 3 5 Collector-to-Emitter Voltage, VCE -- V 7 --100 IT04456 3 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Emitter Voltage, VCE -- V 7 100 IT04457 PC -- Tc 100 Collector Dissipation, PC -- W hFE -- IC 1000 2SB922 / 2SD1238 80 60 40 20 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT04458 No.1429-3/4 2SB922 / 2SD1238 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2002. Specifications and information herein are subject to change without notice. PS No.1429-4/4