BDX16AA MECHANICAL DATA Dimensions in mm 6.35 (0.250) 8.64 (0.340) 3.68 (0.145) rad. max. 11.94 (0.470) 12.70 (0.500) 14.48 (0.570) 14.99 (0.590) 2 0.71 (0.028) 0.86 (0.034) 1 24.13 (0.95) 24.63 (0.97) PNP POWER TRANSISTOR 3.61 (0.142) 4.08(0.161) rad. 1.27 (0.050) 1.91 (0.750) 4.83 (0.190) 5.33 (0.210) 9.14 (0.360) min. TO66 Package. (TO-213AA) Pin 1 – Base Pin 2 – Emitter Case - Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage (Open Emitter) - 160V VCEO Collector – Emitter Voltage (Open Base) - 140V VCER Collector – Emitter Voltage RBE =100Ω - 150V VCEX Collector – Base Voltage VBE = 1.5V - 160V VEBO Emitter – Base Voltage -7V IC Collector Current -3A ICM Peak Collector Current tp = 1s -4A IB Base Current -2A Ptot Power Dissipation TJ Maximum Junction Temperature TSTG Storage Temperature Rth-(j-c) Junction to Case. tcase = 25°C 25W 200°C –65 to 200°C 7°C / W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3367 Issue 1 BDX16AA ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions VCE = -140V Min. Max. VBE = 1.5V -1 Tcase = 150°C -5 ICEX Collector Emitter Cut Off Current V(BR)CEO* Collector Emitter Breakdown Voltage IC = -100mA IB = 0 -140 V(BR)CER* Collector Emitter Breakdown Voltage IC = -1mA RBE = 100Ω -150 Collector Emitter Base Breakdown IC = -1mA Voltage VBE = - 1.5V V(BR)CEX* Typ. Static Forward Current Transfer Ratio VCE = - 4V IC = - 0.5A VCE(sat) Collector Emitter Saturation Voltage IC = - 0.5A VBE Base Emitter Voltage IEBO Emitter Base Cutt-off Current fT Transition Frequency mA V V -160 h21E* Unit 250 — IB = - 0.05A -1 V VCE = - 4V IC = - 0.5A -1.7 V VCB = -7V IC = 0 -1 mA VCE = -10V IC = - 0.2A f = 1MHz 20 4 MHz * Pulse test tp = 300µs , δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3367 Issue 1