SIPEX SP6648ER

®
SP6648
Ultra-low Quiescent Current,
High Efficiency Boost Regulator
FEATURES
■ Ultra-low 12µA Quiescent Current
■ 400mA Output Current at 2.6V Input: 3.3VOUT
■ 94% Efficiency from 2 cell to 3.3VOUT
■ Wide Input Voltage Range: 0.95V to 4.5V
■ 3.3V Fixed or Adjustable Output
■ Integrated Synchronous Rectifier: 0.3Ω
■ 0.3Ω Switch
■ Anti-Ringing Switch Technology
■ Programmable Inductor Peak Current
■ Logic Shutdown Control
■ Under Voltage Lock-Out at 0.61V
■ Programmable Low Battery Detect
■ Single or Dual Cell Alkaline
■ Small 10 pin DFN Package and Industry
Standard 10 pin MSOP
VBATT
1
LBI
2
SP6648
LBON
3
10 Pin DFN
RLIM
4
8 P
GND
7 GND
SHDN
5
6 FB
10 V
OUT
9 LX
Now Available in Lead Free Packaging
APPLICATIONS
■ Camera Flash LED Driver
■ Wireless Mouse
■ PDA's
■ Pagers
■ Medical Monitors
■ Handheld Portable Devices
■ MP3 Players
DESCRIPTION
The SP6648 is an ultra-low quiescent current, high efficiency step-up DC-DC converter ideal for
single cell, dual cell alkaline and Li-Ion battery applications such as digital still cameras, PDA’s,
MP3 players, and other portable devices. The SP6648 combines the high delivery associated
with PWM control, and the low quiescent current and excellent light-load efficiency of PFM control.
The SP6648 features 12µA quiescent current, synchronous rectification, a 0.3Ω charging switch,
anti-ringing inductor switch, programmable low battery detect, under-voltage lockout and
programmable inductor peak current. The device can be controlled by a 1nA active LOW
shutdown pin.
TYPICAL APPLICATION CIRCUIT
500
10µH
VBATT
450
400
+
350
1
LBI
LBON
2
3
4
SHDN
1.87K
SP6648
VBATT
VOUT
10
3.3VOUT
+
LX 9
LBI
LBON
RLIM
5 SHDN
PGND 8
47µF
Io (mA)
47µF
300
250
200
1µF
205K
GND 7
47pF
150
100
FB 6
Vout=3.3V, Ipk=0.85A
50
Vout=5.0V, Ipk=0.85A
0
124K
1.0
1.5
2.0
2.5
3.0
Vin (V)
3.5
4.0
4.5
Maximum Load Current in Operation
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
1
© Copyright 2004 Sipex Corporation
ABSOLUTE MAXIMUM RATINGS
Operating Temperature ................................................ -40°C to +85°C
Lead Temperature (Soldering, 10 sec) ....................................... 300 °C
ESD Rating ........................................................................ 1.5kV HBM
LX, Vo, VBATT , LBON, FB to GND pin ................................ -0.3 to 6.0V
SHDN, LBI ........................................................... -0.3V to VBATT +1.0V
Vo, GND, LX Current ....................................................................... 2A
Reverse VBATT Current .............................................................. 220mA
Forward VBATT Current .............................................................. 500mA
Storage Temperature .................................................. -65 °C to 150°C
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation sections
of the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability.
ELECTRICAL SPECIFICATIONS
VBATT =VSHDN = 2.6V, VFB=0V, ILOAD = 0mA, TAMB= -40°C to +85°C, VOUT = +3.3V, typical values at 27°C unless otherwise
noted. The ♦ denotes the specifications which apply over full operating temperature range -40*C to +85°C, unless otherwise
specified.
PARAMETER
MIN
Input Voltage Operating Range, VBATT
0.7
Output Voltage Range, VOUT
2.5
Start-up Input Voltage, VBATT
TYP
MAX
UNITS
♦
CONDITIONS
4.5
V
♦
After Startup
♦
5.5
V
0.85
1.1
V
♦
V
♦
Under Voltage Lock-out/UVLO
0.5
0.61
0.7
Output Voltage, VO
3.12
RLOAD = 3kΩ
3.30
3.48
V
♦
Quiescent Current into VO, IQO
12
25
µA
♦
VOUT = 3.3V, VFB = 1.5V, Toggle SHDN
Quiescent Current into VBATT, IQB
250
750
nA
♦
VOUT = 3.3V, VFB = 1.5V
Shutdown Current into VO, ISDO
Internal Feedback Divider
1
500
nA
♦
VSHDN = 0V
Shutdown Current into VBATT, ISDB
250
750
nA
♦
VSHDN = 0V, VBATT = 2.6V
Efficiency
84
92
Inductor Current Limit, IPK = 1600/RLIM
650
1300
Output Current
800
1600
%
%
1000
2000
mA
mA
VBATT = 1.3V, IOUT = 100mA, RLIM =2kΩ
VBATT = 2.6V, IOUT = 200mA, RLIM =2kΩ
♦
♦
RLIM = 2kΩ
RLIM = 1kΩ
100
200
mA
mA
VBATT = 1.3V, RLIM = 4kΩ
VBATT = 2.6V, RLIM = 4kΩ
150
400
mA
mA
VBATT = 1.3V, RLIM =2kΩ
VBATT = 2.6V, RLIM =2kΩ
Minimum Off-Time Constant KOFF
0.5
1.0
1.5
V*µs
♦
KOFF ≤ TOFF (VOUT- VBATT)
Maximum On-Time Constant KON
2.5
4.0
5.5
V*µs
♦
KON ≥ TON (VBATT)
300
500
µs
Enable Valid to Output Stable
NMOS Switch Resistance
PMOS Switch Resistance
FB Set Voltage, VFB
1.19
FB Input Current
LBI Falling Trip Voltage
0.56
LBI Hysteresis
0.30
0.6
Ω
♦
INMOS = 100mA
0.30
0.6
Ω
♦
IPMOS = 100mA
1.25
1.31
V
♦
External feedback
1
100
nA
♦
VFB =1.3V
0.61
0.66
V
♦
25
Low Output Voltage for LBON, VOL
Leakage current for LBON
SHDN Input Voltage, Note 1
VIL
VIH
VIL
VIH
SHDN Input Current
LX Pin Leakage
ILOAD = 1mA
mV
0.4
V
♦
VBATT = 1.3V, ISINK = 1mA
1
µA
♦
VBATT = 1.3V, VLBON = 3.3V
♦
♦
♦
♦
VBATT = 1.3V
VBATT = 1.3V
VBATT = 2.6V
VBATT = 2.6V
0.25
1.0
V
0.5
2.0
1
100
nA
3
µA
♦
Note 1: SHDN must transition faster than 1V/100mS for proper operation.
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
2
© Copyright 2004 Sipex Corporation
PIN DESCRIPTION
PIN NUMBER
PIN NAME
1
VBATT
2
LBI
Low Battery Input. LBI below 0.61V causes the SP6648 pin to pull
LBON pin down to ground. Use a resistor divider to program the low
voltage threshold for a specific battery configuration.
3
LBON
Low Battery Output Not. Open drain NMOS output that sinks current
to ground when LBI is below 0.61V.
4
RLIM
Current Limit Resistor. By connecting a resistor RLIM from this pin to
ground the inductor peak current is set by IPEAK=1600/RLIM. The range
for RLIM is 9kΩ (for 180mA) to 1.KΩ (for 1.6A).
5
SHDN
Shutdown Not. Tie this pin high to VBATT, for normal operation. Pull
this pin to ground to disable all circuitry inside the chip. In shutdown
the output voltage will float down to a diode drop below the battery
voltage.
6
FB
Feedback. Connect this pin to GND for fixed +3.3V operation.
Connect this pin to a resistor voltage divider between VOUT and GND
for adjustable output operation.
7
GND
8
PGND
9
LX
Inductor Switching Node. Connect one terminal of the inductor to the
positive terminal of the battery. Connect the second terminal of the
inductor to this pin. The inductor charging current flows into LX,
through the internal charging N-channel FET, and out the PGND pin.
10
VOUT
Output Voltage. The inductor current flows out of this pin during
switch off-time. It is also used as the internal regulator voltage supply.
Connect this pin to the positive terminal of the output capacitor.
Date: 7/19/04
DESCRIPTION
Battery Voltage. The startup circuitry is powered by this pin. Battery
Voltage is used to calculate switch off time: tOFF = KOFF/ (VOUT VBATT). When the battery voltage drops below 0.61V the SP6648
goes into an undervoltage lockout mode (UVLO), where the part is shut
down.
Ground. Connect to ground plane.
Power Ground. The inductor charging current flows out of this pin.
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
3
© Copyright 2004 Sipex Corporation
FUNCTIONAL DIAGRAM
VBATT
LX
QKILL
charge end
IUC
VO
undercurrent
comparator
SHDN
SDI
0.61V
+
c
-
TOFF
+
Min
TOFF
-
c
VBATT
INTERNAL
VBATT
INTERNAL
SUPPLY
UVLO
VOUT
QKILL
R
switch
buffer
Q
PMOS
VO
VBATT
CHARGE
VO
NMOS
Max
Ton
n
Ref
Block
SDI
IBIAS
1.25V
REF
+
-
+
-
c
VOLOW
S
LX
Qn
current
reference
VO
FB
0.61V
c
+
-
LOAD
c
overcurrent
comparator
FB
SWITCH GROUND
Ipkset
RLIM
LBI
current
control
current
reference
PGND
INTERNAL
GROUND
0.61V
+
GND
LBON
c
SP6648
THEORY OF OPERATION
Detailed Description
Control Scheme
The SP6648 is a step-up DC-DC converter that
can start up with input voltages as low as 0.85V
(typically) and operates with an input voltage
down to 0.61V. Ultra low quiescent current of
12µA provides excellent efficiency, up to 94%.
In addition to the main switch, a 0.3Ω internal
MOSFET the SP6648 has an internal synchronous rectifier, increasing efficiency and reducing the space of an external diode. An internal
inductive-damping switch significantly reduces
inductive ringing for low noise high efficiency
operation. If the supply voltage drops below
0.61V the SP6648 goes into under voltage lockout, thus opening both internal switches. An
externally programmable low battery detector
with open drain output provides the ability to
flag battery low condition. The inductor peak
current is externally programmable to allow for
a range of inductor values.
A minimum off-time, current limited pulse frequency modulation (PFM) control scheme combines the high output power and efficiency of a
pulse width modulation (PWM) device with the
ultra low quiescent current of the traditional
PFM. At low to moderate output loads the PFM
control provides higher efficiency than traditional PWM converters are capable of delivering. At these loads the switching frequency is
determined by a minimum off-time (tOFF, MIN)
and a maximum on-time (tON, MAX) where:
Date: 7/19/04
tOFF ≥ KOFF / (VOUT - VBATT) and
tON ≤ KON / VBATT with
KOFF = 1.0Vµs and
KON = 4.0Vµs.
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
4
© Copyright 2004 Sipex Corporation
THEORY OF OPERATION: Continued
At light loads (as shown in plot A in Figure 1)
the charge cycle will last the maximum value for
tON: For a 1V battery this would be as follows:
Inductor Current vs. Load
llim
Ton Max.
tON = KON / VBATT = 4.0Vµs / 1V = 4.0µs
E
Toff Min.
E. Iripple=Toff* (Vo - Vi)/L
llim
Ton Max.
The current built up in the coil during the charge
cycle gets fully discharged (discontinuous conduction mode DCM) When the current in the
coil has reached zero the synchronous rectifier
switch is opened and the voltage across the coil
(from VBATT to LX) is shorted internally to
eliminate inductive ringing.
D
Toff Min.
D. Toff*= (Vo - Vi)/L<Iripple<Ton*Vi/L
llim
Ton Max.
Toff Min.
C. Iripple=Ton*Vi/L
C
llim
Ton Max.
With increasing load (as shown in plot B in
Figure 1) this inductor damping time becomes
shorter, because the output will quickly drop
below its regulation point due to heavier load. If
the load current increases further the SP6648
enters continuous conduction mode (CCM)
where there is always current flowing in the
inductor. The charge time remains at maximum
tON as long as the inductor peak current limit is
not reached as shown in plot C in Figure 1. The
inductor peak current limit can be programmed
by tying a resistor RLIM from the RLIM pin to
ground where:
Toff Min.
B. Iripple=Ton*Vi/L
B
llim
Ton Max.
Toff Min.
A. Iripple=Ton*Vi/L
A
Figure 1. Inductor Current vs. Load
which ends the charge cycle and starts the discharge cycle. However, full load is not yet
achieved because at the end of the minimum
discharge time the output was still within regulation.
Maximum load is reached when this discharge
time has shrunk to the minimum allowed value
TOFF as shown in Plot E of Figure 1.
IPEAK = 1600 / RLIM
When the peak current limit is reached the
charge time is short-cycled.
In plot D of Figure 1, the switch current reaches
the peak current limit during the charge period
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
5
© Copyright 2004 Sipex Corporation
TYPICAL PERFORMANCE CHARACTERISTICS
Refer to the Typical Application Circuit on page 1, TAMB=+25°C.
100
100
95
95
90
90
Efficiency (%)
Efficiency (%)
85
80
75
Vi=3.0V
Vi=2.6V
Vi=2.0V
Vi=1.3V
Vi=1.0V
70
65
85
80
75
Vi=4.2V
Vi=3.2V
Vi=2.6V
Vi=2.0V
Vi=1.6V
Vi=1.0V
70
65
60
0.1
1.0
10.0
100.0
60
1000.0
0.1
1.0
Iload (mA)
3.400
3.340
Vi=4.2V
Vi=3.2V
Vi=2.6V
Vi=2.0V
Vi=1.6V
Vi=1.0V
5.080
5.060
5.040
5.020
Vout (V)
3.320
VOUT (V)
1000.0
5.100
Vi=3.0V
Vi=2.6V
Vi=2.0V
Vi=1.3V
Vi=1.0V
3.360
100.0
Efficiency vs. Current Load, VOUT=5.0V
Efficiency vs. Load Current, VOUT=3.3V
3.380
10.0
Iload (mA)
3.300
3.280
5.000
4.980
3.260
4.960
3.240
4.940
3.220
4.920
4.900
3.200
0
100
200
300
400
0
500
100
200
300
400
500
Iload (mA)
ILOAD(mA)
Line/Load Rejection vs. Load Current, VOUT = 3.3V
Line/Load Rejection vs. Load Current, VOUT = 5.0V
100
300
250
80
200
Iin (uA)
Iin (uA)
60
150
40
100
20
50
0
0
1.0
1.5
2.0
2.5
1.0
3.0
1.5
2.0
2.5
3.0
Vin (V)
3.5
4.0
4.5
Vin (V)
No Load Battery Current, VOUT=3.3V
Date: 7/19/04
No Load Battery Current, VOUT=5.0V
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
6
© Copyright 2004 Sipex Corporation
TYPICAL PERFORMANCE CHARACTERISTICS: Continued
Refer to the Typical Application Circuit on page 1, TAMB=+25°C.
400
500
450
350
400
300
350
300
Io (mA)
Io (mA)
250
200
250
200
150
150
100
100
50
50
0
0
1.0
1.5
2.0
2.5
3.0
1.0
1.5
2.0
2.5
3.0
Vin (V)
Vin (V)
Maximum Resistive Load Current in Startup, VOUT=3.3V
3.5
4.0
4.5
Maximum Resistive Load Current in Startup, VOUT=5.0V
VOUT (AC)
VOUT (AC)
Inductor Current
(0.2A/DIV)
Inductor Current
(0.2A/DIV)
Output Ripple, VIN=2.6V, ILOAD=200mA, VOUT=5.0V
5.0
5.0
4.0
4.0
Kon (V*usec)
Kon (V*usec)
Output Ripple, VIN=2.6V, ILOAD=200mA, VOUT=3.3V
3.0
2.0
1.0
0.0
0.9
2.0
1.0
1.2
1.5
1.8
2.1 2.4
Vin (V)
2.7
3.0
0.0
0.9
3.3
KON vs. VIN , VOUT=3.3V
Date: 7/19/04
3.0
1.4
1.9
2.4
2.9
3.4
Vin (V)
3.9
4.4
4.9
KON vs. VIN , VOUT=5.0V
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
7
© Copyright 2004 Sipex Corporation
TYPICAL PERFORMANCE CHARACTERISTICS: Continued
2.0
2.0
1.5
1.5
Koff (V*usec)
Koff (V*usec)
Refer to the Typical Application Circuit on page 1, TAMB=+25°C.
1.0
0.5
0.5
0.0
0.9
1.0
1.2
1.5
1.8
2.1 2.4
Vin (V)
2.7
3.0
0.0
0.9
3.3
1.4
1.9
2.4
2.9
3.4
Vin (V)
3.9
4.4
4.9
KOFF vs. VIN , VOUT=5.0V
KOFF vs. VIN , VOUT=3.3V
VIN
VIN
VOUT
VOUT
IIN (1A/div)
IIN(1A/div)
Startup, VIN=2.6V, VOUT=3.3V, RLOAD = 100Ω
Startup, VIN=4.2V, VOUT=5.0V, RLOAD = 100Ω
VOUT (AC)
VOUT(AC)
LX
LX
IOUT(0.2A/div)
IOUT (0.5A/DIV)
Load Step, 0.1A to 0.3A, VIN = 2.6V, VOUT = 3.3V
Date: 7/19/04
Load Step, 0.3A to 0.5A, VIN = 4.2V, VOUT = 5.0V
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
8
© Copyright 2004 Sipex Corporation
APPLICATIONS INFORMATION
Circuit Layout
ripple for the SP6648 to regulate the output.
Designers should select input and output capacitors with a rating exceeding the inductor
current ripple, which is typically set by the
inductor value and the KON value as given in the
following relationship:
Printed circuit board layout is a critical part of a
power supply design. Poor designs can result in
excessive EMI on the feedback paths and on the
ground planes with applications involving high
switching frequencies and large peak currents.
Excessive EMI can result in instability or regulation errors. All power components should be
placed on the PC board as closely as possible
with the traces kept short, direct, and wide
(>50mils or 1.25mm). Extra copper on the PC
board should be integrated into ground as a
pseudo-ground plane. On a multilayer PC board,
route the star ground using component-side copper fill, then connect it to the internal ground
plane using vias. For the SP6648 devices, the
inductor and input and output filter capacitors
should be soldered with their ground pins as
close together as possible in a star-ground configuration. The VOUT pin must be bypassed directly to ground as close to the SP6648 devices
as possible (within 0.2in or 5mm). The DC-DC
converter and any digital circuitry should be
placed on the opposite corner of the PC board as
far away from sensitive RF and analog input
stages. Noisy traces, such as from the LX pin,
should be kept away from the voltage-feedback
VOUT node and separated from it using grounded
copper to minimize EMI. See the SP6648EB
Evaluation Board Manual for PC Board Layout
design details.
IL(RIPPLE) = KON/L
For the example of the 10µH inductor the inductor current ripple would be 330mA, while for the
22µH inductor the inductor current ripple value
would be 150mA. Do not allow tantalum capacitors to exceed their ripple-current ratings.
An input filter capacitor can reduce peak currents drawn from the battery and improve efficiency. For most applications, use the same
47µF tantalum capacitor as used for the input.
Low-ESR aluminum electrolytic capacitors are
acceptable provided they meet the ESR requirement of 0.2Ω to 0.3Ω, and we list an appropriate
100µF aluminum electrolytic in the component
selection table, but standard aluminum electrolytic capacitors are not recommended.
In selecting an inductor, the saturation current
specified for the inductor needs to be greater
then the SP6648 peak current to avoid saturating
the inductor, which would result in a loss in
efficiency and could damage the inductor. The
SP6648 evaluation board uses a Sumida
CDRH5D28 10µH inductor with an ISAT value
of 1.3A and a DCR of 0.065Ω, which easily
handles the IPEAK of 0.85A of the SP6648 and
will deliver high efficiencies. Other inductors
could be selected provided their ISAT is greater
than the IPEAK of the SP6648.
Component Selection
Selection of capacitors for SP6648 power supply circuits can be made through the use of the
Component Selection Table. Capacitor equivalent series resistance (ESR) in the range of 0.2Ω
to 0.3Ω is a requirement for obtaining sufficient
output voltage ripple for the SP6648 to properly
regulate under load. For ESR values in this
range, low ESR Tantalum capacitors are recommended. For example, in the SP6648 application circuit a 47µF, 10V, low-ESR, surfacemount tantalum output filter capacitor typically
provides 50mV output ripple when stepping up
from 2.6V to 3.3V at 200mA. Ceramic capacitors have ESR too low to produce enough output
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
9
© Copyright 2004 Sipex Corporation
APPLICATIONS INFORMATION: Continued
INDUCTORS - SURFACE MOUNT
Inductor Specification
Inductance
(µH)
Manufacturer/Part No.
Series R
Ω
ISAT
(A)
Size LxWxH
(mm)
Intuctor Type
Manufacturer
Website
10
Sumida CDRH5D28-100
0.065
1.30
5.7x5.5x3.0
Shielded Ferrite Core
10
TDK RLF5018T-100MR94
0.067
0.94
5.6x5.2x2.0
Shielded Ferrite Core
www.sumida.com
10
Sumida CD43-100
0.180
1.04
4.0x4.5x3.5
Unshileded Ferrite Core
www.sumida.com
22
Sumida CDRH5D28-220
0.122
0.90
5.7x5.5x3
Shileded Ferrite Core
www.sumida.com
22
TDK RLF5018T-220MR63
0.067
0.63
5.6x5.2x2.0
Shielded Ferrite Core
22
Sumida CD43-220
0.378
0.68
4.0x4.5x3.5
Unshielded Ferrite Core
www.tdk.com
www.tdk.com
www.sumida.com
CAPACITORS - SURFACE MOUNT & LEADED
Capacitor Specification
Capacitance Manufacturer Part No.
(µF)
ESR
Ω(max)
Ripple Current
(A) @ 85°C
Size LxWxH
(mm)
Voltage
(V)
Capacitor
Type
Manufacturer
Website
47
Kemet T494C476K010AS
0.300
1.06
6.0x3.2x2.5
10
SMT Tantalum
www.kemet.com
47
Kemet T494V476K010AS
0.300
0.99
7.3x4.3x2.0
10
SMT Tantalum
www.kemet.com
100
Sanyo 25MV100AX
0.220
0.30
6.3DX11L
25
Radial Al Electrolytic www.sanyovideo.com
Note: Components highlighted in bold are those used on the SP6648EB Evaluation Board.
Component Selection Table
VBATT
L1 10µH
R3
549K
C1
+
R5 1.0M
47µF
U1 SP6648
1
R4
LBON
249K
2
3
4
5
VBATT
VOUT
LBI
LX
LBON
RLIM
PGND
GND
SHDN
FB
3.3VOUT
10
9
8
C4
1µF
7
R1
205K
C3
+ C2
47pF
47µF
6
R2
RLIM
1.87K
124K
SP6648EB Evaluation Board Schematic
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
10
© Copyright 2004 Sipex Corporation
APPLICATIONS INFORMATION : Continued
VOUT Programming
output goes low as determined by the relationship:
The SP6648 can be programmed as either a
voltage source or a current source. To program
the SP6648 as voltage source, the SP6648 requires 2 feedback resistors R1 & R2, as shown
in the SP6648EB evaluation board schematic, to
control the output voltage. To set VOUT in the
voltage mode, use the equation:
VLOWBATT = 0.61 * [(R3 + R4)/R4]
R1 = [(VOUT/1.25)-1] * R2
The SP6648 evaluation board R3 & R4 resistors
have been set to trip for a falling battery threshold of about 2.0V. Using this relationship, other
low battery threshold values can be set by the
user.
Using the RLIM Function
UVLO the Under Voltage Lock-Out Function
The peak inductor current, IPEAK, is programmed
externally by the RLIM resistor connected between the RLIM pin and GND. The peak inductor
current is defined by:
Once started up, the SP6648 will regulate the
output until the input battery is completely discharged or until the under voltage lock-out
(UVLO) occurs at VBATT = 0.61V. The UVLO
function will completely open all switches until
the battery again rises above the 0.61V threshold.
IPEAK = 1600/RLIM
The saturation current specified for the inductor
needs to be greater than the peak current to avoid
saturating the inductor, which would result in a
loss in efficiency and could damage the inductor. The SP6648 evaluation board uses a RLIM
value of 1.87K for an IPEAK = 850mA to allow
the circuit to deliver up to 180mA for 1.3V input
and 400mA for 2.6V input. Other values could
be selected using the above relationships.
Maximum Startup Current
It should be noted that for low input voltages the
SP6648 startup circuit can not support large
load currents at startup. In startup the SP6648
needs to boost the output from zero volts using
the input voltage. Once the output is greater than
1.9V the operate circuit takes over and the
SP6648 can supply much more current. Curves
of maximum load current in startup for the
SP6648 are shown in the typical performance
characteristics and can be compared with the
page one curve for maximum load current in
operation.
Using the LBON - Low Battery Output
Function
The SP6648 will regulate the output until the
input battery is completely discharged or until
the under voltage lock-out (UVLO) occurs at
VBATT = 0.61V. To provide a low battery warning, the Low Battery Output function of the
SP6648 can be used. LBON is programmed
externally by the R3 and R4 resistor divider
connected between VBATT , the LBI input pin
and GND. The LBON is an open drain output,
which is active low and is pulled up by a 1M
resistor R5 to VOUT. When the LBI comparator
falling threshold of 0.61V is reached, the LBON
Date: 7/19/04
For 1-cell battery applications, it is recommended
to apply any large load current after the SP6648
has started up, typically in a few milliseconds.
This is typically not a problem in many applications where the load is a processor whose load
current is low until the processor voltage comes
up.
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
11
© Copyright 2004 Sipex Corporation
APPLICATIONS INFORMATION
SP6648LEDEB Evaluation Board with
LumiLED High Brightness White LED
where VREF is around 0.61V, IF is the operating
current of the LumiLED. To set the operating
current to be about 350mA, Rb is selected as 1.8 Ω
as shown in the following schematic. The efficiency of the SP6648 LumiLED circuit is improved by the use of a silicon diode D1 and
resistor R1 to set the voltage at the current sense
resistor R2 to 0.61V instead of the higher 1.25V
at the FB pin. An efficiency curve follows
showing the SP6648 efficiency driving 350mA
output current into the high brightness LumiLED.
For the high brightness LumiLED white LED
application, the SP6648 is generally programmed
as a current source. The bias resistor Rb is used
to set the operating current of the white LED as
equation:
Rb = VREF/IF
VBATT
L1 10µH
1.8-3.2V
C1
10µF
1
2
3
4
5
VBATT
LBI
VOUT
SP6648 LX
LBON
PGND
RLIM
GND
SHDN
FB
Important:
1µF Ceramic Cap at VOUT Pin
needed for stable regulation
10
C4
1µF
9
8
C2
10µF
R1
16.2k
7
6
R5 10K
RLIM
1.87K
D1 1N4148
(R5 optional)
D2
1W LED
350mA
VREF = 0.61V
Rb
1.8Ω
IOUT=0.61V/Rb
SP6648LEDEB Evaluation Board Schematic
100
As shown in following scope photos, if the
SP6648 is powered up before the LumiLED is
plugged in, the circuit will bring the Feedback
pin to 0V and the SP6648 has a feature to set the
output voltage to be 3.3V. Once the LumiLED is
plugged in, the Feedback pin will go up to 1.25V
and begin to regulate. The output voltage will go
from 3.3V to 3.68V (=VF+0.61V), where VF is
the forward voltage of the LumiLED. When the
LumiLED is open, the Feedback pin voltage
will go to 0V and the output voltage will go to
3.3V which will protect the part.
95
Efficiency (%)
90
85
80
75
70
65
60
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
Battery Voltage (V)
SP6648LEDEB Efficiency Curve
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
12
© Copyright 2004 Sipex Corporation
APPLICATIONS INFORMATION
VOUT
VOUT
VREF
VREF
Plug in the LumiLED
Unplug the LumiLED
Brightness Control
One approach to control LED brightness is to
apply a PWM signal to the SHDN input of the
SP6648. In this case, the output current will be
equal to the product of 350mA and the average
duty cycle at the SHDN pin. An optional 10K
potentiometer (R5) may also be used for dimming the LED current by varying the potentiometer between low brightness and full brightness.
PINOUTS
VBATT
1
LBI
2
SP6648
LBON
3
10 Pin DFN
10 V
OUT
9 LX
VBATT 1
LBON 3
SHDN 5
RLIM
4
8 P
GND
7 GND
SHDN
5
6 FB
Date: 7/19/04
LBI 2
RLIM 4
10 VOUT
SP6648
10 Pin MSOP
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
13
9 LX
8 PGNDV
7 GND
6 FB
© Copyright 2004 Sipex Corporation
PACKAGE: 10 PIN MSOP
(ALL DIMENSIONS IN MILLIMETERS)
D
e1
Ø1
E/2
R1
R
E1
E
Gauge Plane
L2
Ø1
Seating Plane
Ø
L
L1
1
2
e
Pin #1 indentifier must be indicated within this shaded area (D/2 * E1/2)
Dimensions in (mm)
10-PIN MSOP
JEDEC MO-187
(BA) Variation
MIN NOM MAX
A
-
-
1.1
A1
0
-
0.15
A2
0.75
b
0.17
-
0.27
c
0.08
-
0.23
D
0.85
0.95
(b)
WITH PLATING
3.00 BSC
E
4.90 BSC
E1
3.00 BSC
e
0.50 BSC
e1
c
2.00 BSC
L
0.4
0.60
0.80
L1
-
0.95
-
L2
-
0.25
-
N
-
10
-
R
0.07
-
-
R1
0.07
-
Ø
0º
Ø1
0º
BASE METAL
D
A2
-
A
8º
-
b
15º
A1
1
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
14
© Copyright 2004 Sipex Corporation
PACKAGE: 10 PIN DFN
D
D/2
A3
E/2
E
Top View
A1
A
Side View
D2
1
2
10 Pin DFN
E2
SYMBOL
A
A1
A3
b
D
D2
e
E
E2
K
L
K
L
e
DIMENSIONS
in
(mm)
(JEDEC MO-229,
VEED-5 VARIATION)
b
Bottom View
MIN NOM MAX
0.80
0
0.90
1.00
0.02 0.05
0.20 REF
0.18 0.25 0.30
3.00 BSC
2.20
2.70
0.50 PITCH
3.00 BSC
1.40
1.75
0.20
0.30 0.40 0.50
10 Pin DFN
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
15
© Copyright 2004 Sipex Corporation
ORDERING INFORMATION
Part Number
Top Mark
Operating Temperature Range
Package Type
SP6648EU ................................ SP6648EU..................-40°C to +85°C ...................................... 10 Pin MSOP
SP6648EU/TR .......................... SP6648EU..................-40°C to +85°C ..................................... 10 Pin MSOP
SP6648ER ............................... SP6648ERYWW..........-40°C to +85°C ........................................ 10 Pin DFN
SP6648ER/TR ......................... SP6648ERYWW..........-40°C to +85°C ....................................... 10 Pin DFN
Available in lead free packaging. To order add "-L" suffix to part number.
Example: SP6648EU/TR = standard; SP6648EU-L/TR = lead free
/TR = Tape and Reel
Pack quantity is 2,500 for MSOP and 3,000 for DFN.
Corporation
ANALOG EXCELLENCE
Sipex Corporation
Headquarters and
Sales Office
233 South Hillview Drive
Milpitas, CA 95035
TEL: (408) 934-7500
FAX: (408) 935-7600
Sipex Corporation reserves the right to make changes to any products described herein. Sipex does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Date: 7/19/04
SP6648 Ultra-low Quiescent Current, High Efficiency Boost Regulator
16
© Copyright 2004 Sipex Corporation