RoHS SMD High Current Shielded Choke Dimensions: .287 Max (7.3 Max) PCHC63R8 Inches (mm) .063+/-0.2 (1.6+/-0.5) .260+/-.008 (6.6+/-0.2) .094 Typ (2.4 Typ) .118 Max (3.0 Max) Allied Part Number Inductance (µh) Idc=0A Tolerance (%) H e a t R a ted Current DC (A) Typ. Isat Current DC (A) Typ. PCHC63R8-R10M-RC 0.10 20 37 45 0.9 PCHC63R8-R22M-RC 0.22 20 23 40 2.5 2.8 PCHC63R8-R33M-RC 0.33 20 20 33 4.0 4.2 PCHC63R8-R47M-RC 0.47 20 16.5 27 5.0 5.5 PCHC63R8-R68M-RC 0.68 20 15 24 5.7 6.3 PCHC63R8-R82M-RC 0.82 20 13 23 7.5 8.0 PCHC63R8-1R0M-RC 1.0 20 12 22 9.0 10.0 PCHC63R8-1R5M-RC 1.5 20 9.5 18 13.5 15 PCHC63R8-2R2M-RC 2.2 20 8.5 14 17 20 PCHC63R8-3R3M-RC 3.3 20 6 12 32 35 PCHC63R8-4R7M-RC 4.7 20 5.5 9 35 40 PCHC63R8-6R8M-RC 6.8 20 4.5 8 54 60 RDC (mΩ) Typ. RDC (mΩ) Max. 1.0 Features • • • • • • Magnetically shielded construction High saturation current up to 45Amps Expanding operating temp range Low DCR resistance Suitable for pick and place Similar to Vishay IHLP-2525CZ series Electrical Inductance Range: .10µH to 6.8µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, .5Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp rise: ∆ T=40ºC Typical at heat rated current. Under no condition should the temperature of the part exceed 125ºC Inductance drop: 30% typical at rated Isat All specifications subject to change without notice. Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Micro-Ohm meter (IDC): 3260B WK & DC Bias 3265B WK Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/12/11 www.alliedcomponents.com