DRAN30 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UL / cUL / TUV / CE ‧UNIVERSAL INPUT 85~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY R R R HH H UL 1310 Class I, Div 2 EN 61558-1 EN 61558-2-17 UL 60950-1 IND. CONT. EQ. UL 508 a EN 60950-1 MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) Single Output Models DRAN30-05 85~264 VAC 30 WATTS + 5 VDC 6000 mA 77% 79% DRAN30-12 85~264 VAC 30 WATTS + 12 VDC 2500 mA 82% 84% DRAN30-24 85~264 VAC 30 WATTS + 24 VDC 1250 mA 83% 86% DRAN30-48 85~264 VAC 30 WATTS + 48 VDC 625 mA 83% 86% max. max. unit unit SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics min. min. typ. typ. Switching frequency Vi nom, Io nom Isolation voltage Input-Output 3000 / 4242 VAC / VDC Input-FG 1500 / 2121 VAC / VDC 80 Isolation resistance Input-Output, @ 500VDC 100 Ambient temperature Operating at Vi nom -40 o Vi nom, from +61 C to +71 C Storage temperature Non operational -40 Relative humidity Vi nom, Io nom 20 Temperature coefficient Vi nom, Io min MTBF Bellcore Issue 6 @40 oC, GB Spring terminal type Cooling Free air convection Pollution degree www.chinfa.com 2011.02.14 + 71 o 2.5 o + 85 C %/ C o C 95 % RH ± 0.03 % / oC 5V model 551000 Hours 12V model 582000 Hours 24V model 588000 Hours 48V model 609000 IEC 60068-2-13 Dimension KHz MΩ o Derating (see derating curve) Altitude during operation 135 Hours 4850 L90 x W40.5 x D114 m mm 2 [email protected] P1 DRAN30 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Rated input voltage Absolute input max. range Conditions Io nom Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 85 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom Leakage current typ. max. unit 100 240 VAC AC in 85 264 VAC DC in 90 375 VDC min. 560 / 330 47 Vi : 230 VAC, Io nom mA 800 mA 63 20 / 40 Hz A 5V model 8.5 W 12V model 24V model 5.6 W 5.5 W 48V model 4.9 W Input-Output 0.25 mA 3.5 mA max. unit Input-FG OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Vi nom 14 VDC 28 VDC 48V model 5V model 48 55 6 A @ 5Vdc / 5.4 A @ 5.5 Vdc Turn on time with 3500μF CAP Vi nom, Io nom Vi nom, Io nom with 3500μF CAP Vi nom, Io nom, BW = 20MHz Vi nom, Io nom 1 second 1.25 A @ 24Vdc / 1.05 A @ 28 Vdc 0.625 A @ 48Vdc / 0.54 A @ 55 Vdc DC ON indicator threshold at start up (Green LED) Vi nom, Io nom 2000 ms 150 ms 500 ms 150 ms 2 ms mV 50 5V model 7.5 VDC 12V model 24V model 18 VDC 35 63 VDC 3500 VDC μF 5V model 3.5 4.5 VDC 12V model 24V model 9.0 10.8 VDC 18 21.6 VDC 48V model Efficiency 1000 ms ms 20 / 30 48V model Vi nom, Io nom VDC 2.5 A @ 12Vdc / 2.1 A @ 14 Vdc Vi nom, 1~0.5 Io nom Capacitor load % 24 Vi nom, Io nom Vi nom, Io nom Power back immunity VDC 12 48V model Ripple & noise % ± 0.5 5.5 12V model 24V model Vi : 115 / 230 VAC , Io nom Fall time Transient recovery time % ± 0.5 5 Hold up time Vi nom, Io nom % +1 5V model 12V model 24V model Rise time typ. Vi nom, Io nom, Po / Pi VDC 37 43 Up to 86%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection Rated over load protection www.chinfa.com 2011.02.14 typ. unit max. T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Varistor 110 140 % [email protected] P2 DRAN30 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics Power Rdy (for 24V model only) Over voltage protection Threshold voltage of contact closed (at start up) Vi nom, Io nom (Auto Recovery) typ. min. Conditions 18.8 max. unit 19.6 VDC 5V model 6.0 6.8 VDC 12V model 15 16.5 VDC 24V model 30 33 VDC 48V model 60 66 VDC Output short circuit Fold forward IP20 Degree of protection APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (only 5V w/o Class 2) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1, CB scheme EN 61558-1, EN 61558-2-17 (meet EN 60204-1) CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 CCC GB4943, GB9254, GB17625.1 Vibration resistance meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 90 x 40.5 x 114 mm (3.6 x 1.59 x 4.49 inches) Case material Plastic Weight 270 g Packing 0.35 kg ; 40 / 15 kg / 2.16 CUFT MECHANISM & PIN CONFIGURATION mm [inch] 40.50 [1.59] 54321 114.00 [4.49] CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. INSTALLATION 90.00 [3.60] -- ++ Rdy Vout ADJ. DC ON Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Spring terminal: AWG24-14 (0.2~2mm2 ) flexible / solid cable, 10 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC GENERAL TOLERANCE N L 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 6 7 8 www.chinfa.com 2011.02.14 [email protected] P3 DRAN30 SERIES PIN ASSIGNMENT Designation PIN NO. 1 OUT 2 3 4 5 Description RDY + DC OK output for relay (not connect except 24V model) + - Positive output terminal - Negative output terminal Positive output terminal Negative output terminal Ground this terminal to minimize high-frequency emissions IN 6 7 OTHER 8 N Input terminals (neutral conductor, no polarity at DC input) L Vout ADJ. Input terminals (phase conductor, no polarity at DC input) DC ON Operation indicator LED Fig. 1 Rdy connection Trimmer-potentiometer for Vout adjustment CIRCUIT SCHEMATIC RL > 700ohm ‧Block diagram for DRAN30 series Rdy L Fuse Line Filter - Vout N Inrush Current Switching Limiter and Device Rectifier a ) Relay Rdy - Vout PWM Controller Y 2.2K 0.5W Y 5.1V 0.3W Vo + Rectifier Vo - Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection Y DC ON (Green LED) 1) RDY (Open Collector) Note: 1) for 24V Model Only b ) 5V signal TYP. CURRENT LIMITED CURVE Output Voltage [ % ] DRAN30-24 100 75 230 Vac 115 Vac 50 25 0 120 130 140 150 160 170 180 190 Output Current [ % ] DERATING CURVE TYP. EFFICIENCY CURVE DRAN30-24 EFFICIENCY [ % ] Power out [ % ] 100 75 0 -40 o 61 Temperature [ C ] www.chinfa.com 2011.02.14 71 95 90 85 80 75 70 65 60 55 50 45 40 10 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P4 DRAN30 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UL / cUL / TUV / CE ‧UNIVERSAL INPUT 85~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY R R R HH H UL 1310 Class I, Div 2 EN 61558-1 EN 61558-2-17 UL 60950-1 IND. CONT. EQ. UL 508 a EN 60950-1 MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) Single Output Models DRAN30-05A 85~264 VAC 30 WATTS + 5 VDC 6000 mA 77% 79% DRAN30-12A 85~264 VAC 30 WATTS + 12 VDC 2500 mA 82% 84% DRAN30-24A 85~264 VAC 30 WATTS + 24 VDC 1250 mA 83% 86% DRAN30-48A 85~264 VAC 30 WATTS + 48 VDC 625 mA 83% 86% max. max. unit unit SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics min. min. typ. typ. Switching frequency Vi nom, Io nom Isolation voltage Input-Output 3000 / 4242 VAC / VDC Input-FG 1500 / 2121 VAC / VDC 80 Isolation resistance Input-Output, @ 500VDC 100 Ambient temperature Operating at Vi nom -40 o 135 KHz MΩ o + 71 o 2.5 o C Derating (see derating curve) Vi nom, from +61 C to +71 C Storage temperature Non operational -40 + 85 Relative humidity Vi nom, Io nom 20 95 % RH Temperature coefficient Vi nom, Io min ± 0.03 % / oC MTBF o Bellcore Issue 6 @40 C, GB Altitude during operation IEC 60068-2-13 Dimension Screw terminal type Cooling Free air convection Pollution degree www.chinfa.com 2011.02.14 %/ C o C 5V model 551000 Hours 12V model 582000 Hours 24V model 588000 Hours 48V model 609000 Hours 4850 L90 x W40.5 x D114 m mm 2 [email protected] P5 DRAN30 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Rated input voltage Absolute input max. range Conditions Io nom Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 85 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom Leakage current typ. max. unit 100 240 VAC AC in 85 264 VAC DC in 90 375 VDC min. 560 / 330 47 Vi : 230 VAC, Io nom mA 800 mA 63 20 / 40 Hz A 5V model 8.5 W 12V model 24V model 5.6 W 5.5 W 48V model 4.9 W Input-Output 0.25 mA 3.5 mA max. unit Input-FG OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Vi nom Turn on time Vi nom, Io nom Vi nom, Io nom Rise time Vi nom, Io nom Vi nom, Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Power back immunity Vi nom, Io nom 1 second 14 VDC 28 VDC 48V model 5V model 48 55 6 A @ 5Vdc / 5.4 A @ 5.5 Vdc DC ON indicator threshold at start up (Green LED) Vi nom, Io nom VDC 2.5 A @ 12Vdc / 2.1 A @ 14 Vdc 1.25 A @ 24Vdc / 1.05 A @ 28 Vdc 0.625 A @ 48Vdc / 0.54 A @ 55 Vdc 1000 ms ms 2000 ms 150 ms 500 ms 150 ms 20 / 30 2 ms 50 mV 5V model 7.5 VDC 12V model 24V model 18 VDC 35 63 VDC 48V model Vi nom, Io nom % 24 Vi nom, 1~0.5 Io nom Capacitor load VDC 12 with 3500μF CAP Vi nom, Io nom % ± 0.5 5.5 12V model 24V model with 3500μF CAP Fall time Transient recovery time 3500 VDC μF 5V model 3.5 4.5 VDC 12V model 24V model 9.0 10.8 VDC 18 21.6 VDC 48V model Efficiency % ± 0.5 5 48V model Vi : 115 / 230 VAC , Io nom % +1 5V model 12V model 24V model Hold up time typ. Vi nom, Io nom, Po / Pi VDC 37 43 Up to 86%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection Rated over load protection www.chinfa.com 2011.02.14 typ. unit max. T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Varistor 110 140 % [email protected] P6 DRAN30 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics Power Rdy (for 24V model only) Over voltage protection Threshold voltage of contact closed (at start up) Vi nom, Io nom (Auto Recovery) typ. min. Conditions 18.8 max. unit 19.6 VDC 5V model 6.0 6.8 VDC 12V model 15 16.5 VDC 24V model 30 33 VDC 48V model 60 66 VDC Output short circuit Fold forward IP20 Degree of protection APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (only 5V w/o Class 2) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1, CB scheme EN 61558-1, EN 61558-2-17 (meet EN 60204-1) CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 CCC GB4943, GB9254, GB17625.1 Vibration resistance meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 90 x 40.5 x 114 mm (3.6 x 1.59 x 4.49 inches) Case material Plastic Weight 270 g Packing 0.35 kg ; 40 / 15 kg / 2.16 CUFT MECHANISM & PIN CONFIGURATION mm [inch] 40.50 [1.59] 54321 90.00 [3.60] -- ++ Rdy Vout ADJ. DC ON N L 6 7 8 www.chinfa.com 2011.02.14 114.00 [4.49] CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Screw terminal: AWG26-12 (0.2~2.5mm2 ) flexible / solid cable, connector can withstand torque at maximum 5 pound-inches. 4~5 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] [email protected] P7 DRAN30 SERIES PIN ASSIGNMENT Designation PIN NO. 1 OUT 2 3 4 5 Description RDY + DC OK output for relay (not connect except 24V model) + - Positive output terminal - Negative output terminal Positive output terminal Negative output terminal Ground this terminal to minimize high-frequency emissions IN 6 7 OTHER 8 N Input terminals (neutral conductor, no polarity at DC input) L Vout ADJ. Input terminals (phase conductor, no polarity at DC input) DC ON Operation indicator LED Fig. 1 Rdy connection Trimmer-potentiometer for Vout adjustment CIRCUIT SCHEMATIC RL > 700ohm ‧Block diagram for DRAN30 series Rdy L Fuse Line Filter - Vout N Inrush Current Switching Limiter and Device Rectifier a ) Relay Rdy - Vout PWM Controller Y 2.2K 0.5W Y 5.1V 0.3W Vo + Rectifier Vo - Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection Y DC ON (Green LED) 1) RDY (Open Collector) Note: 1) for 24V Model Only b ) 5V signal TYP. CURRENT LIMITED CURVE Output Voltage [ % ] DRAN30-24A 100 75 230 Vac 115 Vac 50 25 0 120 130 140 150 160 170 180 190 Output Current [ % ] DERATING CURVE TYP. EFFICIENCY CURVE DRAN30-24A EFFICIENCY [ % ] Power out [ % ] 100 75 0 -40 o 61 Temperature [ C ] www.chinfa.com 2011.02.14 71 95 90 85 80 75 70 65 60 55 50 45 40 10 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P8